[PATCH 2/3] ARM: dts: sun8i: v3s: enable EHCI/OHCI for Lichee Pi Zero
Icenowy Zheng
icenowy at aosc.io
Sat Nov 21 19:40:10 EST 2020
As the USB port on Lichee Pi Zero works in the OTG mode, enable the
EHCI/OHCI controllers for it.
Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
index 2e4587d26ce5..0cd969194acb 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
@@ -77,6 +77,10 @@ red_led {
};
};
+&ehci0 {
+ status = "okay";
+};
+
&mmc0 {
broken-cd;
bus-width = <4>;
@@ -84,6 +88,10 @@ &mmc0 {
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-0 = <&uart0_pb_pins>;
pinctrl-names = "default";
--
2.28.0
More information about the linux-arm-kernel
mailing list