[PATCH v14 1/8] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
Yifeng Zhao
yifeng.zhao at rock-chips.com
Fri Nov 20 04:56:10 EST 2020
Documentation support for Rockchip RK3xxx NAND flash controllers
Signed-off-by: Yifeng Zhao <yifeng.zhao at rock-chips.com>
---
Changes in v14: None
Changes in v13: None
Changes in v12:
- Fix some warnings while make dt_binding_check
- Drop a allOf defined
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8:
- Fix a error while make dt_binding_check
Changes in v7:
- Fix some wrong define
Changes in v6:
- Fix some wrong define
- Modified the definition of compatible
Changes in v5:
- Fix some wrong define.
- Add boot-medium define.
- Remove some compatible define.
Changes in v4:
- The compatible define with rkxx_nfc.
- Add assigned-clocks.
- Fix some wrong defineChanges in.
Changes in v3:
- Change the title for the dt-bindings.
Changes in v2: None
.../mtd/rockchip,nand-controller.yaml | 161 ++++++++++++++++++
1 file changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
new file mode 100644
index 000000000000..0922536b1811
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoCs NAND FLASH Controller (NFC)
+
+allOf:
+ - $ref: "nand-controller.yaml#"
+
+maintainers:
+ - Heiko Stuebner <heiko at sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,px30-nfc
+ - const: rockchip,rk2928-nfc
+ - const: rockchip,rv1108-nfc
+ - items:
+ - const: rockchip,rk3036-nfc
+ - const: rockchip,rk2928-nfc
+ - items:
+ - const: rockchip,rk3308-nfc
+ - const: rockchip,rv1108-nfc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: ahb
+ - const: nfc
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-rates:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+patternProperties:
+ "^nand@[0-7]$":
+ type: object
+ properties:
+ reg:
+ minimum: 0
+ maximum: 7
+
+ nand-ecc-mode:
+ const: hw
+
+ nand-ecc-step-size:
+ const: 1024
+
+ nand-ecc-strength:
+ enum: [16, 24, 40, 60, 70]
+ description: |
+ The ECC configurations that can be supported are as follows.
+ NFC v600 ECC 16, 24, 40, 60
+ RK2928, RK3066, RK3188
+
+ NFC v622 ECC 16, 24, 40, 60
+ RK3036, RK3128
+
+ NFC v800 ECC 16
+ RK3308, RV1108
+
+ NFC v900 ECC 16, 40, 60, 70
+ RK3326, PX30
+
+ nand-bus-width:
+ const: 8
+
+ rockchip,boot-blks:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2
+ default: 16
+ description:
+ The NFC driver need this information to select ECC
+ algorithms supported by the boot ROM.
+ Only used in combination with 'nand-is-boot-medium'.
+
+ rockchip,boot-ecc-strength:
+ enum: [16, 24, 40, 60, 70]
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ If specified it indicates that a different BCH/ECC setting is
+ supported by the boot ROM.
+ NFC v600 ECC 16, 24
+ RK2928, RK3066, RK3188
+
+ NFC v622 ECC 16, 24, 40, 60
+ RK3036, RK3128
+
+ NFC v800 ECC 16
+ RK3308, RV1108
+
+ NFC v900 ECC 16, 70
+ RK3326, PX30
+
+ Only used in combination with 'nand-is-boot-medium'.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3308-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ nfc: nand-controller at ff4b0000 {
+ compatible = "rockchip,rk3308-nfc",
+ "rockchip,rv1108-nfc";
+ reg = <0xff4b0000 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&clks SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+
+ pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+ &flash_rdn &flash_rdy &flash_wrn>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand at 0 {
+ reg = <0>;
+ label = "rk-nand";
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <16>;
+ nand-is-boot-medium;
+ rockchip,boot-blks = <8>;
+ rockchip,boot-ecc-strength = <16>;
+ };
+ };
+
+...
--
2.17.1
More information about the linux-arm-kernel
mailing list