[EXT] [PATCH v3 4/9] arm64: dts: ls1028a: use constants in the clockgen phandle
Ashish Kumar
ashish.kumar at nxp.com
Fri Nov 20 04:25:14 EST 2020
HI Michael,
> -----Original Message-----
> From: Michael Walle <michael at walle.cc>
> Sent: Monday, November 9, 2020 12:21 AM
> To: linux-clk at vger.kernel.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> Cc: Michael Turquette <mturquette at baylibre.com>; Stephen Boyd
> <sboyd at kernel.org>; Rob Herring <robh+dt at kernel.org>; Shawn Guo
> <shawnguo at kernel.org>; Leo Li <leoyang.li at nxp.com>; Y.b. Lu
> <yangbo.lu at nxp.com>; Xiaowei Bao <xiaowei.bao at nxp.com>; Ashish Kumar
> <ashish.kumar at nxp.com>; Vladimir Oltean <vladimir.oltean at nxp.com>;
> Michael Walle <michael at walle.cc>
> Subject: [EXT] [PATCH v3 4/9] arm64: dts: ls1028a: use constants in the clockgen
> phandle
>
> Caution: EXT Email
>
> Now that we have constants, use them. This is just a mechanical change.
>
> Signed-off-by: Michael Walle <michael at walle.cc>
> ---
> Changes since v2:
> - new patch
I am not able to apply this patch cleanly, does it have any dependency patch that I have missed?
My assumption is that this patch series is superset of
Series 1: [1/4] dt-bindings: clock: document the fsl-flexspi-clk driver
And
Series 2: [v2,1/5] clk: divider: add devm_clk_hw_register_divider_table()
Regards
Ashish
>
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 162 +++++++++++++-----
> 1 file changed, 116 insertions(+), 46 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 2f60a6ba7e14..055da2c710c3 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -8,6 +8,7 @@
> *
> */
>
> +#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/thermal/thermal.h>
>
> @@ -32,7 +33,7 @@
> compatible = "arm,cortex-a72";
> reg = <0x0>;
> enable-method = "psci";
> - clocks = <&clockgen 1 0>;
> + clocks = <&clockgen QORIQ_CLK_CMUX 0>;
> next-level-cache = <&l2>;
> cpu-idle-states = <&CPU_PW20>;
> #cooling-cells = <2>; @@ -43,7 +44,7 @@
> compatible = "arm,cortex-a72";
> reg = <0x1>;
> enable-method = "psci";
> - clocks = <&clockgen 1 0>;
> + clocks = <&clockgen QORIQ_CLK_CMUX 0>;
> next-level-cache = <&l2>;
> cpu-idle-states = <&CPU_PW20>;
> #cooling-cells = <2>; @@ -236,7 +237,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2000000 0x0 0x10000>;
> interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -246,7 +248,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2010000 0x0 0x10000>;
> interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -256,7 +259,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2020000 0x0 0x10000>;
> interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -266,7 +270,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2030000 0x0 0x10000>;
> interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -276,7 +281,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2040000 0x0 0x10000>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -286,7 +292,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2050000 0x0 0x10000>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -296,7 +303,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2060000 0x0 0x10000>;
> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -306,7 +314,8 @@
> #size-cells = <0>;
> reg = <0x0 0x2070000 0x0 0x10000>;
> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 3>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(4)>;
> status = "disabled";
> };
>
> @@ -318,7 +327,8 @@
> <0x0 0x20000000 0x0 0x10000000>;
> reg-names = "fspi_base", "fspi_mmap";
> interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 2 0>, <&clockgen 2 0>;
> + clocks = <&clockgen QORIQ_CLK_HWACCEL 0>,
> + <&clockgen QORIQ_CLK_HWACCEL 0>;
> clock-names = "fspi_en", "fspi";
> status = "disabled";
> };
> @@ -330,7 +340,8 @@
> reg = <0x0 0x2100000 0x0 0x10000>;
> interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "dspi";
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> dmas = <&edma0 0 62>, <&edma0 0 60>;
> dma-names = "tx", "rx";
> spi-num-chipselects = <4>; @@ -345,7 +356,8 @@
> reg = <0x0 0x2110000 0x0 0x10000>;
> interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "dspi";
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> dmas = <&edma0 0 58>, <&edma0 0 56>;
> dma-names = "tx", "rx";
> spi-num-chipselects = <4>; @@ -360,7 +372,8 @@
> reg = <0x0 0x2120000 0x0 0x10000>;
> interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "dspi";
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> dmas = <&edma0 0 54>, <&edma0 0 2>;
> dma-names = "tx", "rx";
> spi-num-chipselects = <3>; @@ -373,7 +386,7 @@
> reg = <0x0 0x2140000 0x0 0x10000>;
> interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> clock-frequency = <0>; /* fixed up by bootloader */
> - clocks = <&clockgen 2 1>;
> + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
> voltage-ranges = <1800 1800 3300 3300>;
> sdhci,auto-cmd12;
> little-endian;
> @@ -386,7 +399,7 @@
> reg = <0x0 0x2150000 0x0 0x10000>;
> interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> clock-frequency = <0>; /* fixed up by bootloader */
> - clocks = <&clockgen 2 1>;
> + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
> voltage-ranges = <1800 1800 3300 3300>;
> sdhci,auto-cmd12;
> broken-cd;
> @@ -399,7 +412,8 @@
> compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
> reg = <0x0 0x2180000 0x0 0x10000>;
> interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&sysclk>, <&clockgen 4 1>;
> + clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
> +
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg", "per";
> status = "disabled";
> };
> @@ -408,7 +422,8 @@
> compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
> reg = <0x0 0x2190000 0x0 0x10000>;
> interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&sysclk>, <&clockgen 4 1>;
> + clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
> +
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg", "per";
> status = "disabled";
> };
> @@ -417,7 +432,8 @@
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0500 0x0 0x100>;
> interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> status = "disabled";
> };
>
> @@ -425,7 +441,8 @@
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0600 0x0 0x100>;
> interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> status = "disabled";
> };
>
> @@ -434,7 +451,8 @@
> compatible = "fsl,ls1028a-lpuart";
> reg = <0x0 0x2260000 0x0 0x1000>;
> interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg";
> dma-names = "rx","tx";
> dmas = <&edma0 1 32>, @@ -446,7 +464,8 @@
> compatible = "fsl,ls1028a-lpuart";
> reg = <0x0 0x2270000 0x0 0x1000>;
> interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg";
> dma-names = "rx","tx";
> dmas = <&edma0 1 30>, @@ -458,7 +477,8 @@
> compatible = "fsl,ls1028a-lpuart";
> reg = <0x0 0x2280000 0x0 0x1000>;
> interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg";
> dma-names = "rx","tx";
> dmas = <&edma0 1 28>, @@ -470,7 +490,8 @@
> compatible = "fsl,ls1028a-lpuart";
> reg = <0x0 0x2290000 0x0 0x1000>;
> interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg";
> dma-names = "rx","tx";
> dmas = <&edma0 1 26>, @@ -482,7 +503,8 @@
> compatible = "fsl,ls1028a-lpuart";
> reg = <0x0 0x22a0000 0x0 0x1000>;
> interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg";
> dma-names = "rx","tx";
> dmas = <&edma0 1 24>, @@ -494,7 +516,8 @@
> compatible = "fsl,ls1028a-lpuart";
> reg = <0x0 0x22b0000 0x0 0x1000>;
> interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "ipg";
> dma-names = "rx","tx";
> dmas = <&edma0 1 22>, @@ -513,8 +536,10 @@
> interrupt-names = "edma-tx", "edma-err";
> dma-channels = <32>;
> clock-names = "dmamux0", "dmamux1";
> - clocks = <&clockgen 4 1>,
> - <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> };
>
> gpio1: gpio at 2300000 {
> @@ -576,7 +601,8 @@
> <0x7 0x100520 0x0 0x4>;
> reg-names = "ahci", "sata-ecc";
> interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> status = "disabled";
> };
>
> @@ -748,14 +774,20 @@
> cluster1_core0_watchdog: watchdog at c000000 {
> compatible = "arm,sp805", "arm,primecell";
> reg = <0x0 0xc000000 0x0 0x1000>;
> - clocks = <&clockgen 4 15>, <&clockgen 4 15>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(16)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(16)>;
> clock-names = "wdog_clk", "apb_pclk";
> };
>
> cluster1_core1_watchdog: watchdog at c010000 {
> compatible = "arm,sp805", "arm,primecell";
> reg = <0x0 0xc010000 0x0 0x1000>;
> - clocks = <&clockgen 4 15>, <&clockgen 4 15>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(16)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(16)>;
> clock-names = "wdog_clk", "apb_pclk";
> };
>
> @@ -764,8 +796,14 @@
> compatible = "fsl,vf610-sai";
> reg = <0x0 0xf100000 0x0 0x10000>;
> interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> - <&clockgen 4 1>, <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "bus", "mclk1", "mclk2", "mclk3";
> dma-names = "tx", "rx";
> dmas = <&edma0 1 4>, @@ -779,8 +817,14 @@
> compatible = "fsl,vf610-sai";
> reg = <0x0 0xf110000 0x0 0x10000>;
> interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> - <&clockgen 4 1>, <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "bus", "mclk1", "mclk2", "mclk3";
> dma-names = "tx", "rx";
> dmas = <&edma0 1 6>, @@ -794,8 +838,14 @@
> compatible = "fsl,vf610-sai";
> reg = <0x0 0xf120000 0x0 0x10000>;
> interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> - <&clockgen 4 1>, <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "bus", "mclk1", "mclk2", "mclk3";
> dma-names = "tx", "rx";
> dmas = <&edma0 1 8>, @@ -809,8 +859,14 @@
> compatible = "fsl,vf610-sai";
> reg = <0x0 0xf130000 0x0 0x10000>;
> interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> - <&clockgen 4 1>, <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "bus", "mclk1", "mclk2", "mclk3";
> dma-names = "tx", "rx";
> dmas = <&edma0 1 10>, @@ -824,8 +880,14 @@
> compatible = "fsl,vf610-sai";
> reg = <0x0 0xf140000 0x0 0x10000>;
> interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> - <&clockgen 4 1>, <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "bus", "mclk1", "mclk2", "mclk3";
> dma-names = "tx", "rx";
> dmas = <&edma0 1 12>, @@ -839,8 +901,14 @@
> compatible = "fsl,vf610-sai";
> reg = <0x0 0xf150000 0x0 0x10000>;
> interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> - <&clockgen 4 1>, <&clockgen 4 1>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>,
> + <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> clock-names = "bus", "mclk1", "mclk2", "mclk3";
> dma-names = "tx", "rx";
> dmas = <&edma0 1 14>, @@ -961,7 +1029,7 @@
> ethernet at 0,4 {
> compatible = "fsl,enetc-ptp";
> reg = <0x000400 0 0 0 0>;
> - clocks = <&clockgen 2 3>;
> + clocks = <&clockgen QORIQ_CLK_HWACCEL
> + 3>;
> little-endian;
> fsl,extts-fifo;
> };
> @@ -1056,8 +1124,10 @@
> interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> <0 223 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "DE", "SE";
> - clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
> - <&clockgen 2 2>;
> + clocks = <&dpclk>,
> + <&clockgen QORIQ_CLK_HWACCEL 2>,
> + <&clockgen QORIQ_CLK_HWACCEL 2>,
> + <&clockgen QORIQ_CLK_HWACCEL 2>;
> clock-names = "pxlclk", "mclk", "aclk", "pclk";
> arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> arm,malidp-arqos-value = <0xd000d000>;
> --
> 2.20.1
More information about the linux-arm-kernel
mailing list