[PATCH 1/8] dt-bindings: display: imx: Add i.MX8qxp/qm DPU binding

Liu Ying victor.liu at nxp.com
Thu Nov 19 22:40:52 EST 2020


On Thu, 2020-11-19 at 09:46 -0600, Rob Herring wrote:
> On Thu, 19 Nov 2020 17:22:18 +0800, Liu Ying wrote:
> > This patch adds bindings for i.MX8qxp/qm Display Processing Unit.
> > 
> > Signed-off-by: Liu Ying <victor.liu at nxp.com>
> > ---
> >  .../bindings/display/imx/fsl,imx8qxp-dpu.yaml      | 358 +++++++++++++++++++++
> >  1 file changed, 358 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:29:6: [warning] wrong indentation: expected 6 but found 5 (indentation)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:69:111: [warning] line too long (111 > 110 characters) (line-length)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:70:111: [warning] line too long (111 > 110 characters) (line-length)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:71:111: [warning] line too long (112 > 110 characters) (line-length)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:72:111: [warning] line too long (112 > 110 characters) (line-length)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:73:111: [warning] line too long (111 > 110 characters) (line-length)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:74:111: [warning] line too long (111 > 110 characters) (line-length)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:75:111: [warning] line too long (112 > 110 characters) (line-length)
> ./Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml:76:111: [warning] line too long (112 > 110 characters) (line-length)

I'll fix the yamllint warnings in v2. Sorry.

> 
> dtschema/dtc warnings/errors:
> Error: Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.example.dts:85.33-34 syntax error
> FATAL ERROR: Unable to parse input tree
> make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.example.dt.yaml] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1364: dt_binding_check] Error 2

The dtschema/dtc errors in patch 1/8, 2/8 and 3/8 are caused by LPCG
clock patch dependence(the patch 2/5 in the below series) which I
should have noted:

https://www.spinics.net/lists/arm-kernel/msg856137.html

Regards,
Liu Ying

> 
> 
> See https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F1402850&data=04%7C01%7Cvictor.liu%40nxp.com%7Ca608f971d3f746496dfd08d88ca25bd4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637413976240971666%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=mj24M4wUVSa5vQmBaU5k6jHdmzL5R0JRNJ3tAqRiBLM%3D&reserved=0
> 
> The base for the patch is generally the last rc1. Any dependencies
> should be noted.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
> 




More information about the linux-arm-kernel mailing list