[PATCH v4 1/4] dt-binding: mt8183: Add Mediatek MDP3 dt-bindings
Daoyuan Huang
daoyuan.huang at mediatek.com
Thu Nov 19 21:29:03 EST 2020
From: daoyuan huang <daoyuan.huang at mediatek.com>
This patch adds DT binding document for Media Data Path 3 (MDP3)
a unit in multimedia system used for scaling and color format convert.
Signed-off-by: Ping-Hsun Wu <ping-hsun.wu at mediatek.com>
Signed-off-by: daoyuan huang <daoyuan.huang at mediatek.com>
---
.../bindings/media/mediatek,mt8183-mdp3.txt | 208 ++++++++++++++++++
1 file changed, 208 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
new file mode 100644
index 000000000000..d4db908b8b53
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
@@ -0,0 +1,208 @@
+* Mediatek Media Data Path 3
+
+Media Data Path 3 (MDP3) is used for scaling and color space conversion.
+
+Required properties (controller node):
+- compatible: "mediatek,mt8183-mdp3"
+- mediatek,scp: the node of system control processor (SCP), using the
+ remoteproc & rpmsg framework, see
+ Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
+- mediatek,mmsys: the node of mux(multiplexer) controller for HW connections.
+- mediatek,mm-mutex: the node of sof(start of frame) signal controller.
+- mediatek,mailbox-gce: the node of global command engine (GCE), used to
+ read/write registers with critical time limitation, see
+ Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details.
+- mboxes: mailbox number used to communicate with GCE.
+- gce-subsys: sub-system id corresponding to the register address.
+- gce-event-names: in use event name list, used to correspond to event IDs.
+- gce-events: in use event IDs list, all IDs are defined in
+ 'dt-bindings/gce/mt8183-gce.h'.
+
+Required properties (all function blocks, child node):
+- compatible: Should be one of
+ "mediatek,mt8183-mdp-rdma" - read DMA
+ "mediatek,mt8183-mdp-rsz" - resizer
+ "mediatek,mt8183-mdp-wdma" - write DMA
+ "mediatek,mt8183-mdp-wrot" - write DMA with rotation
+ "mediatek,mt8183-mdp-ccorr" - color correction with 3X3 matrix
+- reg: Physical base address and length of the function block register space.
+- clocks: device clocks, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- power-domains: A phandle to the power domain, see
+ Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Required properties (DMA function blocks, child node):
+- compatible: Should be one of
+ "mediatek,mt8183-mdp-rdma"
+ "mediatek,mt8183-mdp-wdma"
+ "mediatek,mt8183-mdp-wrot"
+- mdp-comps(wdma & wrot only):
+ "mediatek,mt8183-mdp-path" - MDP output path selection, create a
+ component for path connectedness of HW
+ pipe control; Align with mdp_comp_of_ids[]
+ in mtk-mdp3-comp.c.
+- mdp-comp-ids(wdma & wrot only): Index of the output paths, the number aligns
+ with mdp_comp_matches[] in mtk-mdp3-comp.c.
+- iommus: should point to the respective IOMMU block with master port as
+ argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for
+ details.
+- mediatek,larb: Must contain the local arbiters in the current Socs, see
+ Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt for
+ details.
+
+Required properties (input path selection node):
+- compatible:
+ "mediatek,mt8183-mmsys" - For MDP input/output source selection.
+- mdp-comps:
+ "mediatek,mt8183-mdp-dl" - MDP direct link input path selection,
+ create a component for path connectedness
+ of HW pipe control; Align with
+ mdp_comp_of_ids[] in mtk-mdp3-comp.c.
+- mdp-comp-ids: Index of the input paths, the number aligns with
+ mdp_comp_matches[] in mtk-mdp3-comp.c.
+- reg: Physical base address and length of the function block register space.
+- clocks: device clocks, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+
+Required properties (ISP PASS2 (DIP) module path selection node):
+- compatible:
+ "mediatek,mt8183-imgsys" - For ISP PASS2 (DIP) modules frame sync
+ control with MDP.
+- mdp-comps:
+ "mediatek,mt8183-mdp-imgi" - Input DMA of ISP PASS2 (DIP) module for
+ raw image input.
+ "mediatek,mt8183-mdp-exto" - Output DMA of ISP PASS2 (DIP) module for
+ yuv image output.
+- mdp-comp-ids: Index of the modules, the number aligns with mdp_comp_matches[]
+ in mtk-mdp3-comp.c.
+- reg: Physical base address and length of the function block register space.
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Example:
+ mmsys: syscon at 14000000 {
+ compatible = "mediatek,mt8183-mmsys", "syscon";
+ mdp-comps = "mediatek,mt8183-mdp-dl",
+ "mediatek,mt8183-mdp-dl";
+ mdp-comp-ids = <0 1>;
+ reg = <0 0x14000000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&mmsys CLK_MM_MDP_DL_TXCK>,
+ <&mmsys CLK_MM_MDP_DL_RX>,
+ <&mmsys CLK_MM_IPU_DL_TXCK>,
+ <&mmsys CLK_MM_IPU_DL_RX>;
+ };
+
+ mdp_rdma0: mdp-rdma0 at 14001000 {
+ compatible = "mediatek,mt8183-mdp-rdma",
+ "mediatek,mt8183-mdp3";
+ mediatek,scp = <&scp>;
+ mediatek,mdp-id = <0>;
+ reg = <0 0x14001000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+ <&mmsys CLK_MM_MDP_RSZ1>;
+ iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+ mediatek,larb = <&larb0>;
+ mediatek,mmsys = <&mmsys>;
+ mediatek,mm-mutex = <&mutex>;
+ mediatek,imgsys = <&imgsys>;
+ mediatek,mailbox-gce = <&gce>;
+ mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
+ <&gce 21 CMDQ_THR_PRIO_LOWEST 0>,
+ <&gce 22 CMDQ_THR_PRIO_LOWEST 0>,
+ <&gce 23 CMDQ_THR_PRIO_LOWEST 0>;
+ gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+ <&gce 0x14010000 SUBSYS_1401XXXX>,
+ <&gce 0x14020000 SUBSYS_1402XXXX>,
+ <&gce 0x15020000 SUBSYS_1502XXXX>;
+ mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+ <CMDQ_EVENT_MDP_RDMA0_EOF>,
+ <CMDQ_EVENT_MDP_RSZ0_SOF>,
+ <CMDQ_EVENT_MDP_RSZ1_SOF>,
+ <CMDQ_EVENT_MDP_TDSHP_SOF>,
+ <CMDQ_EVENT_MDP_WROT0_SOF>,
+ <CMDQ_EVENT_MDP_WROT0_EOF>,
+ <CMDQ_EVENT_MDP_WDMA0_SOF>,
+ <CMDQ_EVENT_MDP_WDMA0_EOF>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_0>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_1>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_2>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_3>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_4>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_5>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_6>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_7>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_8>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_9>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_10>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_11>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_12>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_13>,
+ <CMDQ_EVENT_ISP_FRAME_DONE_P2_14>,
+ <CMDQ_EVENT_WPE_A_DONE>,
+ <CMDQ_EVENT_SPE_B_DONE>;
+ };
+
+ mdp_rsz0: mdp-rsz0 at 14003000 {
+ compatible = "mediatek,mt8183-mdp-rsz";
+ mediatek,mdp-id = <0>;
+ reg = <0 0x14003000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+ };
+
+ mdp_rsz1: mdp-rsz1 at 14004000 {
+ compatible = "mediatek,mt8183-mdp-rsz";
+ mediatek,mdp-id = <1>;
+ reg = <0 0x14004000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+ };
+
+ mdp_wrot0: mdp-wrot0 at 14005000 {
+ compatible = "mediatek,mt8183-mdp-wrot";
+ mediatek,mdp-id = <0>;
+ mdp-comps = "mediatek,mt8183-mdp-path";
+ mdp-comp-ids = <0>;
+ reg = <0 0x14005000 0 0x1000>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WROT0>;
+ iommus = <&iommu M4U_PORT_MDP_WROT0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ mdp_wdma: mdp-wdma at 14006000 {
+ compatible = "mediatek,mt8183-mdp-wdma";
+ mediatek,mdp-id = <0>;
+ mdp-comps = "mediatek,mt8183-mdp-path";
+ mdp-comp-ids = <1>;
+ reg = <0 0x14006000 0 0x1000>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+ iommus = <&iommu M4U_PORT_MDP_WDMA0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ mdp_ccorr: mdp-ccorr at 1401c000 {
+ compatible = "mediatek,mt8183-mdp-ccorr";
+ mediatek,mdp-id = <0>;
+ reg = <0 0x1401c000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+ clocks = <&mmsys CLK_MM_MDP_CCORR>;
+ };
+
+ imgsys: syscon at 15020000 {
+ compatible = "mediatek,mt8183-imgsys", "syscon";
+ mediatek,mdp-id = <0>;
+ mdp-comps = "mediatek,mt8183-mdp-imgi",
+ "mediatek,mt8183-mdp-exto";
+ mdp-comp-ids = <0 1>;
+ reg = <0 0x15020000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1502XXXX 0 0x1000>;
+ #clock-cells = <1>;
+ };
--
2.18.0
More information about the linux-arm-kernel
mailing list