[PATCH v5 1/5] firmware: arm_scmi: Add Voltage Domain Support
Cristian Marussi
cristian.marussi at arm.com
Thu Nov 19 14:01:47 EST 2020
Hi Sudeep
thanks for reviewing.
On Thu, Nov 19, 2020 at 04:08:24PM +0000, Sudeep Holla wrote:
> On Tue, Nov 17, 2020 at 12:34:11PM +0000, Cristian Marussi wrote:
> > Add SCMI Voltage Domain protocol support.
> >
> > Signed-off-by: Cristian Marussi <cristian.marussi at arm.com>
> > ---
> > v4 --> v5
> > - removed inline
> > - moved segmented intervals defines
> > - fixed some macros complaints by checkpatch
> >
> > v3 --> v4
> > - avoid fixed sized typing in voltage_info
> > - avoid coccinelle falde complaints about pointer-sized allocations
> >
> > v2 --> v3
> > - restrict segmented voltage domain descriptors to one triplet
> > - removed unneeded inline
> > - free allocated resources for invalid voltage domain
> > - added __must_check to info_get voltage operations
> > - added a few comments
> > - removed fixed size typing from struct voltage_info
> >
> > v1 --> v2
> > - fix voltage levels query loop to reload full cmd description
> > between iterations as reported by Etienne Carriere
> > - ensure rx buffer is properly sized calli scmi_reset_rx_to_maxsz
> > between transfers
> > ---
> > drivers/firmware/arm_scmi/Makefile | 2 +-
> > drivers/firmware/arm_scmi/common.h | 1 +
> > drivers/firmware/arm_scmi/driver.c | 2 +
> > drivers/firmware/arm_scmi/voltage.c | 397 ++++++++++++++++++++++++++++
> > include/linux/scmi_protocol.h | 64 +++++
> > 5 files changed, 465 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/firmware/arm_scmi/voltage.c
> >
> > diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
> > index bc0d54f8e861..6a2ef63306d6 100644
> > --- a/drivers/firmware/arm_scmi/Makefile
> > +++ b/drivers/firmware/arm_scmi/Makefile
> > @@ -4,7 +4,7 @@ scmi-driver-y = driver.o notify.o
> > scmi-transport-y = shmem.o
> > scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
> > scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
> > -scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o
> > +scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
> > scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
> > $(scmi-transport-y)
> > obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
> > diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> > index 65063fa948d4..c0fb45e7c3e8 100644
> > --- a/drivers/firmware/arm_scmi/common.h
> > +++ b/drivers/firmware/arm_scmi/common.h
> > @@ -169,6 +169,7 @@ DECLARE_SCMI_REGISTER_UNREGISTER(perf);
> > DECLARE_SCMI_REGISTER_UNREGISTER(power);
> > DECLARE_SCMI_REGISTER_UNREGISTER(reset);
> > DECLARE_SCMI_REGISTER_UNREGISTER(sensors);
> > +DECLARE_SCMI_REGISTER_UNREGISTER(voltage);
> > DECLARE_SCMI_REGISTER_UNREGISTER(system);
> >
> > #define DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(id, name) \
> > diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> > index 3dfd8b6a0ebf..ada35e63feae 100644
> > --- a/drivers/firmware/arm_scmi/driver.c
> > +++ b/drivers/firmware/arm_scmi/driver.c
> > @@ -946,6 +946,7 @@ static int __init scmi_driver_init(void)
> > scmi_power_register();
> > scmi_reset_register();
> > scmi_sensors_register();
> > + scmi_voltage_register();
> > scmi_system_register();
> >
> > return platform_driver_register(&scmi_driver);
> > @@ -961,6 +962,7 @@ static void __exit scmi_driver_exit(void)
> > scmi_power_unregister();
> > scmi_reset_unregister();
> > scmi_sensors_unregister();
> > + scmi_voltage_unregister();
> > scmi_system_unregister();
> >
> > platform_driver_unregister(&scmi_driver);
> > diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c
> > new file mode 100644
> > index 000000000000..6b71589e0846
> > --- /dev/null
> > +++ b/drivers/firmware/arm_scmi/voltage.c
> > @@ -0,0 +1,397 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * System Control and Management Interface (SCMI) Voltage Protocol
> > + *
> > + * Copyright (C) 2020 ARM Ltd.
> > + */
> > +
> > +#include <linux/scmi_protocol.h>
> > +
> > +#include "common.h"
> > +
> > +#define VOLTAGE_DOMS_NUM_MASK GENMASK(15, 0)
> > +#define REMAINING_LEVELS_MASK GENMASK(31, 16)
> > +#define RETURNED_LEVELS_MASK GENMASK(11, 0)
> > +
> > +enum scmi_voltage_protocol_cmd {
> > + VOLTAGE_DOMAIN_ATTRIBUTES = 0x3,
> > + VOLTAGE_DESCRIBE_LEVELS = 0x4,
> > + VOLTAGE_CONFIG_SET = 0x5,
> > + VOLTAGE_CONFIG_GET = 0x6,
> > + VOLTAGE_LEVEL_SET = 0x7,
> > + VOLTAGE_LEVEL_GET = 0x8,
> > +};
> > +
> > +struct scmi_msg_resp_protocol_attributes {
> > + __le32 attr;
> > +#define NUM_VOLTAGE_DOMAINS(x) ((u16)(FIELD_GET(VOLTAGE_DOMS_NUM_MASK, (x))))
> > +};
> > +
>
> Sorry but same annoying comment again, drop one element structures.
>
I'll do.
> > +struct scmi_msg_resp_domain_attributes {
> > + __le32 attr;
> > + u8 name[SCMI_MAX_STR_SIZE];
> > +};
> > +
> > +struct scmi_msg_cmd_describe_levels {
> > + __le32 domain_id;
> > + __le32 level_index;
> > +};
> > +
> > +struct scmi_msg_resp_describe_levels {
> > + __le32 flags;
> > +#define NUM_REMAINING_LEVELS(f) ((u16)(FIELD_GET(REMAINING_LEVELS_MASK, (f))))
> > +#define NUM_RETURNED_LEVELS(f) ((u16)(FIELD_GET(RETURNED_LEVELS_MASK, (f))))
> > +#define SUPPORTS_SEGMENTED_LEVELS(f) ((f) & BIT(12))
> > + __le32 voltage[];
> > +};
> > +
> > +struct scmi_msg_cmd_config_set {
> > + __le32 domain_id;
> > + __le32 config;
> > +};
> > +
> > +struct scmi_msg_cmd_level_set {
> > + __le32 domain_id;
> > + __le32 flags;
> > + __le32 voltage_level;
> > +};
> > +
> > +struct voltage_info {
> > + unsigned int version;
> > + unsigned int num_domains;
> > + struct scmi_voltage_info **domains;
> > +};
> > +
> > +static int scmi_protocol_attributes_get(const struct scmi_handle *handle,
> > + struct voltage_info *vinfo)
> > +{
> > + int ret;
> > + struct scmi_xfer *t;
> > + struct scmi_msg_resp_protocol_attributes *resp;
> > +
> > + ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
> > + SCMI_PROTOCOL_VOLTAGE, 0, sizeof(*resp), &t);
> > + if (ret)
> > + return ret;
> > +
> > + resp = t->rx.buf;
> > + ret = scmi_do_xfer(handle, t);
> > + if (!ret)
> > + vinfo->num_domains =
> > + NUM_VOLTAGE_DOMAINS(le32_to_cpu(resp->attr));
> > +
> > + scmi_xfer_put(handle, t);
> > + return ret;
> > +}
> > +
> > +static int scmi_init_voltage_levels(struct device *dev,
> > + struct scmi_voltage_info *v,
> > + u32 flags, u32 num_returned,
> > + u32 num_remaining)
> > +{
> > + bool segmented;
> > + u32 num_levels;
> > +
>
> Why can't you pass the above 2 directly from the caller to this function
> since they are just used to obtain them here.
>
I can and I'll do for segmented, num_levels I need to have it split in
returned and remaining here to check the holy triplet is fine.
(assuming I want to keep all the checkery inside this func)
>
> [...]
>
> > +static int scmi_voltage_descriptors_get(const struct scmi_handle *handle,
> > + struct voltage_info *vinfo)
> > +{
> > + int ret, dom;
> > + struct scmi_xfer *td, *tl;
> > + struct device *dev = handle->dev;
> > + struct scmi_msg_resp_domain_attributes *resp_dom;
> > + struct scmi_msg_resp_describe_levels *resp_levels;
> > +
> > + ret = scmi_xfer_get_init(handle, VOLTAGE_DOMAIN_ATTRIBUTES,
> > + SCMI_PROTOCOL_VOLTAGE, sizeof(__le32),
> > + sizeof(*resp_dom), &td);
> > + if (ret)
> > + return ret;
> > + resp_dom = td->rx.buf;
> > +
> > + ret = scmi_xfer_get_init(handle, VOLTAGE_DESCRIBE_LEVELS,
> > + SCMI_PROTOCOL_VOLTAGE, sizeof(__le64), 0, &tl);
> > + if (ret)
> > + goto outd;
> > + resp_levels = tl->rx.buf;
> > +
> > + for (dom = 0; dom < vinfo->num_domains; dom++) {
> > + u32 desc_index = 0;
> > + u16 num_returned = 0, num_remaining = 0;
> > + struct scmi_msg_cmd_describe_levels *cmd;
> > + struct scmi_voltage_info *v;
> > +
> > + /* Retrieve domain attributes at first ... */
> > + put_unaligned_le32(dom, td->tx.buf);
> > + ret = scmi_do_xfer(handle, td);
> > + /* Skip domain on comms error */
> > + if (ret)
> > + continue;
> > +
> > + v = devm_kzalloc(dev, sizeof(*v), GFP_KERNEL);
> > + if (!v) {
> > + ret = -ENOMEM;
> > + break;
> > + }
> > +
>
> Why can't we allocate vinfo->domains real structure instead of pointers
> and indirection there ? I understand that it helps to manage holes easily
> but I think that would simplify the dynamic allocation and error handling.
> It doesn't have to be this complicated(not much but still) IMO.
>
> May be scmi_voltage_info_get can use num_levels to either return NULL
> or vinfo->domains[domain_id] ?
>
Yes it was for the holes, but I'll do allocating contiguously and
checking on num_levels != 0 as you suggested
Thanks
Cristian
> Regards,
> Sudeep
More information about the linux-arm-kernel
mailing list