[PATCH v6 08/11] clk: at91: sama7g5: decrease lower limit for MCK0 rate

[Claudiu Beznea]

On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and
CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is
also changed by DVFS to avoid over/under clocking of MCK0 consumers.
The lower limit is changed to be able to set MCK0 accordingly by
DVFS.

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/clk/at91/sama7g5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 335e9c943c65..29d9781e6712 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -807,7 +807,7 @@ static const struct clk_pll_characteristics pll_characteristics = {
 
 /* MCK0 characteristics. */
 static const struct clk_master_characteristics mck0_characteristics = {
-	.output = { .min = 140000000, .max = 200000000 },
+	.output = { .min = 50000000, .max = 200000000 },
 	.divisors = { 1, 2, 4, 3, 5 },
 	.have_div3_pres = 1,
 };
-- 
2.7.4