[PATCH v4 11/15] arm64: dts: imx8: split adma ss into dma and audio ss
Dong Aisheng
aisheng.dong at nxp.com
Thu Nov 19 08:26:50 EST 2020
amda ss is consisted of dma and audio ss in qxp which are
also used in qm.
Let's split them into two ss for better code reuse.
Signed-off-by: Dong Aisheng <aisheng.dong at nxp.com>
---
ChangeLog:
v3->4:
* remove amda_* prefix for new boards colibri
v2->v3:
* use new clock-indices IDs
* remove ss prefix for adma
v1->v2:
* change to the new two cell scu clk binding
---
.../boot/dts/freescale/imx8-ss-adma.dtsi | 244 +-----------------
.../boot/dts/freescale/imx8-ss-audio.dtsi | 68 +++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++++++++
.../boot/dts/freescale/imx8qxp-ai_ml.dts | 16 +-
.../freescale/imx8qxp-colibri-eval-v3.dtsi | 8 +-
.../boot/dts/freescale/imx8qxp-colibri.dtsi | 12 +-
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 46 ++--
.../boot/dts/freescale/imx8qxp-ss-adma.dtsi | 16 +-
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 16 +-
9 files changed, 329 insertions(+), 299 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
index ff0696d80654..9386d1a59e82 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -4,245 +4,5 @@
* Dong Aisheng <aisheng.dong at nxp.com>
*/
-#include <dt-bindings/clock/imx8-lpcg.h>
-#include <dt-bindings/firmware/imx/rsrc.h>
-
-adma_subsys: bus at 59000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x59000000 0x0 0x59000000 0x2000000>;
-
- dma_ipg_clk: clock-dma-ipg {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <120000000>;
- clock-output-names = "dma_ipg_clk";
- };
-
- dsp_lpcg: clock-controller at 59580000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x59580000 0x10000>;
- #clock-cells = <1>;
- clocks = <&dma_ipg_clk>,
- <&dma_ipg_clk>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
- <IMX_LPCG_CLK_7>;
- clock-output-names = "dsp_lpcg_adb_clk",
- "dsp_lpcg_ipg_clk",
- "dsp_lpcg_core_clk";
- power-domains = <&pd IMX_SC_R_DSP>;
- };
-
- dsp_ram_lpcg: clock-controller at 59590000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x59590000 0x10000>;
- #clock-cells = <1>;
- clocks = <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_4>;
- clock-output-names = "dsp_ram_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_DSP_RAM>;
- };
-
- adma_dsp: dsp at 596e8000 {
- compatible = "fsl,imx8qxp-dsp";
- reg = <0x596e8000 0x88000>;
- clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
- <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
- <&dsp_lpcg IMX_LPCG_CLK_7>;
- clock-names = "ipg", "ocram", "core";
- power-domains = <&pd IMX_SC_R_MU_13A>,
- <&pd IMX_SC_R_MU_13B>,
- <&pd IMX_SC_R_DSP>,
- <&pd IMX_SC_R_DSP_RAM>;
- mbox-names = "txdb0", "txdb1",
- "rxdb0", "rxdb1";
- mboxes = <&lsio_mu13 2 0>,
- <&lsio_mu13 2 1>,
- <&lsio_mu13 3 0>,
- <&lsio_mu13 3 1>;
- memory-region = <&dsp_reserved>;
- status = "disabled";
- };
-
- adma_lpuart0: serial at 5a060000 {
- reg = <0x5a060000 0x1000>;
- interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
- <&uart0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_0>;
- status = "disabled";
- };
-
- adma_lpuart1: serial at 5a070000 {
- reg = <0x5a070000 0x1000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
- <&uart1_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_1>;
- status = "disabled";
- };
-
- adma_lpuart2: serial at 5a080000 {
- reg = <0x5a080000 0x1000>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
- <&uart2_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_2>;
- status = "disabled";
- };
-
- adma_lpuart3: serial at 5a090000 {
- reg = <0x5a090000 0x1000>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
- <&uart3_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_3>;
- status = "disabled";
- };
-
- uart0_lpcg: clock-controller at 5a460000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a460000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart0_lpcg_baud_clk",
- "uart0_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_0>;
- };
-
- uart1_lpcg: clock-controller at 5a470000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a470000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart1_lpcg_baud_clk",
- "uart1_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_1>;
- };
-
- uart2_lpcg: clock-controller at 5a480000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a480000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart2_lpcg_baud_clk",
- "uart2_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_2>;
- };
-
- uart3_lpcg: clock-controller at 5a490000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a490000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart3_lpcg_baud_clk",
- "uart3_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_3>;
- };
-
- adma_i2c0: i2c at 5a800000 {
- reg = <0x5a800000 0x4000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_0>;
- status = "disabled";
- };
-
- adma_i2c1: i2c at 5a810000 {
- reg = <0x5a810000 0x4000>;
- interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_1>;
- status = "disabled";
- };
-
- adma_i2c2: i2c at 5a820000 {
- reg = <0x5a820000 0x4000>;
- interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_2>;
- status = "disabled";
- };
-
- adma_i2c3: i2c at 5a830000 {
- reg = <0x5a830000 0x4000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_3>;
- status = "disabled";
- };
-
- i2c0_lpcg: clock-controller at 5ac00000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac00000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c0_lpcg_clk",
- "i2c0_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_0>;
- };
-
- i2c1_lpcg: clock-controller at 5ac10000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac10000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c1_lpcg_clk",
- "i2c1_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_1>;
- };
-
- i2c2_lpcg: clock-controller at 5ac20000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac20000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c2_lpcg_clk",
- "i2c2_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_2>;
- };
-
- i2c3_lpcg: clock-controller at 5ac30000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac30000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c3_lpcg_clk",
- "i2c3_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_3>;
- };
-};
+#include "imx8-ss-audio.dtsi"
+#include "imx8-ss-dma.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
new file mode 100644
index 000000000000..6c8d75ef9250
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ * Dong Aisheng <aisheng.dong at nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+audio_subsys: bus at 59000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+
+ audio_ipg_clk: clock-audio-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "audio_ipg_clk";
+ };
+
+ dsp_lpcg: clock-controller at 59580000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59580000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>,
+ <&audio_ipg_clk>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_7>;
+ clock-output-names = "dsp_lpcg_adb_clk",
+ "dsp_lpcg_ipg_clk",
+ "dsp_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_DSP>;
+ };
+
+ dsp_ram_lpcg: clock-controller at 59590000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59590000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "dsp_ram_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_DSP_RAM>;
+ };
+
+ dsp: dsp at 596e8000 {
+ compatible = "fsl,imx8qxp-dsp";
+ reg = <0x596e8000 0x88000>;
+ clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
+ <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
+ <&dsp_lpcg IMX_LPCG_CLK_7>;
+ clock-names = "ipg", "ocram", "core";
+ power-domains = <&pd IMX_SC_R_MU_13A>,
+ <&pd IMX_SC_R_MU_13B>,
+ <&pd IMX_SC_R_DSP>,
+ <&pd IMX_SC_R_DSP_RAM>;
+ mbox-names = "txdb0", "txdb1",
+ "rxdb0", "rxdb1";
+ mboxes = <&lsio_mu13 2 0>,
+ <&lsio_mu13 2 1>,
+ <&lsio_mu13 3 0>,
+ <&lsio_mu13 3 1>;
+ memory-region = <&dsp_reserved>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
new file mode 100644
index 000000000000..960a802b8b6e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ * Dong Aisheng <aisheng.dong at nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+dma_subsys: bus at 5a000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
+
+ dma_ipg_clk: clock-dma-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "dma_ipg_clk";
+ };
+
+ lpuart0: serial at 5a060000 {
+ reg = <0x5a060000 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
+ <&uart0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ status = "disabled";
+ };
+
+ lpuart1: serial at 5a070000 {
+ reg = <0x5a070000 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
+ <&uart1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ status = "disabled";
+ };
+
+ lpuart2: serial at 5a080000 {
+ reg = <0x5a080000 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
+ <&uart2_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ status = "disabled";
+ };
+
+ lpuart3: serial at 5a090000 {
+ reg = <0x5a090000 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
+ <&uart3_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ status = "disabled";
+ };
+
+ uart0_lpcg: clock-controller at 5a460000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a460000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart0_lpcg_baud_clk",
+ "uart0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ };
+
+ uart1_lpcg: clock-controller at 5a470000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a470000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart1_lpcg_baud_clk",
+ "uart1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ };
+
+ uart2_lpcg: clock-controller at 5a480000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a480000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart2_lpcg_baud_clk",
+ "uart2_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ };
+
+ uart3_lpcg: clock-controller at 5a490000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a490000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart3_lpcg_baud_clk",
+ "uart3_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ };
+
+ i2c0: i2c at 5a800000 {
+ reg = <0x5a800000 0x4000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 5a810000 {
+ reg = <0x5a810000 0x4000>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 5a820000 {
+ reg = <0x5a820000 0x4000>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at 5a830000 {
+ reg = <0x5a830000 0x4000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_3>;
+ status = "disabled";
+ };
+
+ i2c0_lpcg: clock-controller at 5ac00000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac00000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c0_lpcg_clk",
+ "i2c0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_0>;
+ };
+
+ i2c1_lpcg: clock-controller at 5ac10000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac10000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c1_lpcg_clk",
+ "i2c1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_1>;
+ };
+
+ i2c2_lpcg: clock-controller at 5ac20000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac20000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c2_lpcg_clk",
+ "i2c2_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_2>;
+ };
+
+ i2c3_lpcg: clock-controller at 5ac30000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac30000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c3_lpcg_clk",
+ "i2c3_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_3>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
index b5352706e3f0..47bb68823b24 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -13,13 +13,13 @@
compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
aliases {
- serial1 = &adma_lpuart1;
- serial2 = &adma_lpuart2;
- serial3 = &adma_lpuart3;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
};
chosen {
- stdout-path = &adma_lpuart2;
+ stdout-path = &lpuart2;
};
memory at 80000000 {
@@ -82,7 +82,7 @@
};
/* BT */
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
uart-has-rtscts;
@@ -90,21 +90,21 @@
};
/* LS-UART0 */
-&adma_lpuart1 {
+&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart1>;
status = "okay";
};
/* Debug */
-&adma_lpuart2 {
+&lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
status = "okay";
};
/* PCI-E UART */
-&adma_lpuart3 {
+&lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>;
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index c7336f387605..144fc9e82da7 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -26,7 +26,7 @@
};
};
-&adma_i2c1 {
+&i2c1 {
status = "okay";
/* M41T0M6 real time clock on carrier board */
@@ -37,17 +37,17 @@
};
/* Colibri UART_B */
-&adma_lpuart0 {
+&lpuart0 {
status= "okay";
};
/* Colibri UART_C */
-&adma_lpuart2 {
+&lpuart2 {
status= "okay";
};
/* Colibri UART_A */
-&adma_lpuart3 {
+&lpuart3 {
status= "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
index f38acff0d25c..89d70e030433 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -10,7 +10,7 @@
compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
chosen {
- stdout-path = &adma_lpuart3;
+ stdout-path = &lpuart3;
};
reg_module_3v3: regulator-module-3v3 {
@@ -22,7 +22,7 @@
};
/* On-module I2C */
-&adma_i2c0 {
+&i2c0 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -49,7 +49,7 @@
};
/* Colibri I2C */
-&adma_i2c1 {
+&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -58,19 +58,19 @@
};
/* Colibri UART_B */
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
};
/* Colibri UART_C */
-&adma_lpuart2 {
+&lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
};
/* Colibri UART_A */
-&adma_lpuart3 {
+&lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index c40bbb313b78..863232a47004 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -12,7 +12,7 @@
compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
chosen {
- stdout-path = &adma_lpuart0;
+ stdout-path = &lpuart0;
};
memory at 80000000 {
@@ -30,11 +30,30 @@
};
};
-&adma_dsp {
+&dsp {
status = "okay";
};
-&adma_i2c1 {
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -110,31 +129,12 @@
};
};
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
-};
-
&scu_key {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
index 3dc3238e7ca6..dc1daa8dc72f 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -4,34 +4,34 @@
* Dong Aisheng <aisheng.dong at nxp.com>
*/
-&adma_lpuart0 {
+&lpuart0 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart1 {
+&lpuart1 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart2 {
+&lpuart2 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart3 {
+&lpuart3 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_i2c0 {
+&i2c0 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c1 {
+&i2c1 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c2 {
+&i2c2 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c3 {
+&i2c3 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9513bb7b5c89..1e6b4995091e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -30,10 +30,10 @@
gpio5 = &lsio_gpio5;
gpio6 = &lsio_gpio6;
gpio7 = &lsio_gpio7;
- i2c0 = &adma_i2c0;
- i2c1 = &adma_i2c1;
- i2c2 = &adma_i2c2;
- i2c3 = &adma_i2c3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
@@ -42,10 +42,10 @@
mu2 = &lsio_mu2;
mu3 = &lsio_mu3;
mu4 = &lsio_mu4;
- serial0 = &adma_lpuart0;
- serial1 = &adma_lpuart1;
- serial2 = &adma_lpuart2;
- serial3 = &adma_lpuart3;
+ serial0 = &lpuart0;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
};
cpus {
--
2.23.0
More information about the linux-arm-kernel
mailing list