[PATCH V5 0/2] mailbox: Add mhuv2 mailbox controller's support

[Viresh Kumar]

Hi Jassi,

Here is the updated version based on your suggestions.

I feel bad that I haven't implemented the single-word protocol as a
special case of multi-word one in the earlier attempt. Perhaps I was too
consumed by the terminology used by the ARM folks in the previous
version of the driver and the reference manual of the controller :)

V1/V4->V5

- The binding patch already had 4 versions, while the driver had only 1.
  To send everything together, I had to bump the entire thing to V5.

- Removed single-word and multi-word protocols and introduced
  data-transfer protocol which works with 1 or more windows.

- Moved register names to small case.

Rob, I have kept your Reviewed-by tag as is, please let me know if you
would like to revoke it.

--
Viresh

Viresh Kumar (2):
  dt-bindings: mailbox : arm,mhuv2: Add bindings
  mailbox: arm_mhuv2: Add driver

 .../bindings/mailbox/arm,mhuv2.yaml           |  209 +++
 MAINTAINERS                                   |    9 +
 drivers/mailbox/Kconfig                       |    7 +
 drivers/mailbox/Makefile                      |    2 +
 drivers/mailbox/arm_mhuv2.c                   | 1136 +++++++++++++++++
 include/linux/mailbox/arm_mhuv2_message.h     |   20 +
 6 files changed, 1383 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
 create mode 100644 drivers/mailbox/arm_mhuv2.c
 create mode 100644 include/linux/mailbox/arm_mhuv2_message.h

-- 
2.25.0.rc1.19.g042ed3e048af