[PATCH 1/1] ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151

[Alexandre Torgue]

Hi,

On 11/10/20 3:36 PM, Amelie Delaunay wrote:
> Update mdma1 clients channel priority level following stm32-mdma bindings.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
> ---
>   arch/arm/boot/dts/stm32mp151.dtsi | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index 719a4276a348..b95c46c82223 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1294,7 +1294,7 @@
>   			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>   			clocks = <&rcc HASH1>;
>   			resets = <&rcc HASH1_R>;
> -			dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
> +			dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
>   			dma-names = "in";
>   			dma-maxburst = <2>;
>   			status = "disabled";
> @@ -1358,8 +1358,8 @@
>   			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
>   			reg-names = "qspi", "qspi_mm";
>   			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> -			dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
> -			       <&mdma1 22 0x10 0x100008 0x0 0x0>;
> +			dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
> +			       <&mdma1 22 0x2 0x100008 0x0 0x0>;
>   			dma-names = "tx", "rx";
>   			clocks = <&rcc QSPI_K>;
>   			resets = <&rcc QSPI_R>;
> 

Applied on stm32-next.

Thanks.
Alex