[PATCH 1/6] dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS

[Rob Herring]

On Sat, 14 Nov 2020 09:46:08 +0100, Grzegorz Jaszczyk wrote:
> From: Suman Anna <s-anna at ti.com>
> 
> The Programmable Real-Time Unit and Industrial Communication Subsystem
> (PRU-ICSS or simply PRUSS) on various TI SoCs consists of dual 32-bit
> RISC cores (Programmable Real-Time Units, or PRUs) for program execution.
> 
> The K3 AM65x amd J721E SoCs have the next generation of the PRU-ICSS IP,
> commonly called ICSSG. The ICSSG IP on AM65x SoCs has two PRU cores,
> two auxiliary custom PRU cores called Real Time Units (RTUs). The K3
> AM65x SR2.0 and J721E SoCs have a revised version of the ICSSG IP, and
> include two additional custom auxiliary PRU cores called Transmit PRUs
> (Tx_PRUs).
> 
> This patch adds the bindings for these PRU cores. The binding covers the
> OMAP architecture SoCs - AM33xx, AM437x and AM57xx; Keystone 2 architecture
> based 66AK2G SoC; and the K3 architecture based SoCs - AM65x and J721E. The
> Davinci based OMAPL138 SoCs will be covered in a future patch.
> 
> Co-developed-by: Roger Quadros <rogerq at ti.com>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> Signed-off-by: Suman Anna <s-anna at ti.com>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
> ---
>  .../bindings/remoteproc/ti,pru-rproc.yaml     | 214 ++++++++++++++++++
>  1 file changed, 214 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml:37:6: [warning] wrong indentation: expected 6 but found 5 (indentation)
./Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml:92:2: [warning] wrong indentation: expected 2 but found 1 (indentation)

dtschema/dtc warnings/errors:


See https://patchwork.ozlabs.org/patch/1400241

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.