[GIT PULL] i.MX fixes for 5.10, round 4

[Shawn Guo]

The following changes since commit e402599e5e5e0b2758d7766fd9f6d7953d4ccd85:

  ARM: dts: imx6q-prti6q: fix PHY address (2020-11-02 07:51:24 +0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.10-4

for you to fetch changes up to 33d0d843872c5ddbe28457a92fc6f2487315fb9f:

  ARM: dts: imx50-evk: Fix the chip select 1 IOMUX (2020-11-10 10:36:10 +0800)

----------------------------------------------------------------
i.MX fixes for 5.10, round 4:

- Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch
  device work reliably.
- Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of
  the native CSPI_SSI function.
- Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match
  hardware datasheet.
- Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board.

----------------------------------------------------------------
Andrew Lunn (1):
      ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking

Fabio Estevam (1):
      ARM: dts: imx50-evk: Fix the chip select 1 IOMUX

Lucas Stach (1):
      arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point

Sergey Matyukevich (1):
      arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy

 arch/arm/boot/dts/imx50-evk.dts           | 2 +-
 arch/arm/boot/dts/imx6qdl-udoo.dtsi       | 2 +-
 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 3 +++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +-
 4 files changed, 6 insertions(+), 3 deletions(-)