[PATCH] counter: microchip-tcb-capture: Fix CMR value check

Alexandre Belloni alexandre.belloni at bootlin.com
Sat Nov 14 17:48:27 EST 2020


On 11/11/2020 11:38:07-0500, William Breathitt Gray wrote:
> The ATMEL_TC_ETRGEDG_* defines are not masks but rather possible values
> for CMR. This patch fixes the action_get() callback to properly check
> for these values rather than mask them.
> 
> Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
> Cc: Kamel Bouhara <kamel.bouhara at bootlin.com>
> Signed-off-by: William Breathitt Gray <vilhelm.gray at gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni at bootlin.com>

> ---
>  drivers/counter/microchip-tcb-capture.c | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
> index 039c54a78aa5..142b389fc9db 100644
> --- a/drivers/counter/microchip-tcb-capture.c
> +++ b/drivers/counter/microchip-tcb-capture.c
> @@ -183,16 +183,20 @@ static int mchp_tc_count_action_get(struct counter_device *counter,
>  
>  	regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
>  
> -	*action = MCHP_TC_SYNAPSE_ACTION_NONE;
> -
> -	if (cmr & ATMEL_TC_ETRGEDG_NONE)
> +	switch (cmr & ATMEL_TC_ETRGEDG_BOTH) {
> +	default:
>  		*action = MCHP_TC_SYNAPSE_ACTION_NONE;
> -	else if (cmr & ATMEL_TC_ETRGEDG_RISING)
> +		break;
> +	case ATMEL_TC_ETRGEDG_RISING:
>  		*action = MCHP_TC_SYNAPSE_ACTION_RISING_EDGE;
> -	else if (cmr & ATMEL_TC_ETRGEDG_FALLING)
> +		break;
> +	case ATMEL_TC_ETRGEDG_FALLING:
>  		*action = MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE;
> -	else if (cmr & ATMEL_TC_ETRGEDG_BOTH)
> +		break;
> +	case ATMEL_TC_ETRGEDG_BOTH:
>  		*action = MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE;
> +		break;
> +	}
>  
>  	return 0;
>  }
> -- 
> 2.29.2
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



More information about the linux-arm-kernel mailing list