[PATCH v9 0/5] Exynos: Simple QoS for exynos-bus using interconnect

Sylwester Nawrocki s.nawrocki at samsung.com
Thu Nov 12 09:09:26 EST 2020


This patchset adds interconnect API support for the Exynos SoC "samsung,
exynos-bus" compatible devices, which already have their corresponding
exynos-bus driver in the devfreq subsystem.  Complementing the devfreq
driver with an interconnect functionality allows to ensure the QoS
requirements of devices accessing the system memory (e.g. video processing
devices) are fulfilled and allows to avoid issues like the one discussed
in thread [1].

This patch series adds implementation of the interconnect provider per each
"samsung,exynos-bus" compatible DT node, with one interconnect node per
provider.  The interconnect code which was previously added as a part of
the devfreq driver has been converted to a separate platform driver.
In the devfreq a corresponding virtual child platform device is registered.
Integration of devfreq and interconnect frameworks is achieved through
the PM QoS API.

A sample interconnect consumer for exynos-mixer is added in patch 5/5,
it is currently added only for exynos4412 and allows to address the
mixer DMA underrun error issues [1].

Changes since v8:
 - excluded from the series already applied dts patches, 
 - Co-developed-by/Signed-off-by tag corrections, Ack tags added,
 - the maintainers entry corrections adressing review comments,
 - Kconfig/Makefile improvements/corrections,
 - whitespace/indentation cleanup.

The series has been tested on Odroid U3 board. It is based on v5.10-rc1.

--
Regards,
Sylwester

Changes since v7:
 - drivers/interconnect/exynos renamed to drivers/interconnect/samsung,
 - added INTERCONNECT_SAMSUNG Kconfig symbol,
 - added missing driver sync_state callback,
 - improved the DT binding description,
 - added a patch adding maintainers entry,
 - updated comment in patch 7/7, typo fix (patch 1/7).

Changes since v6:
 - the interconnect consumer DT bindings are now used to describe dependencies
   of the interconnects (samsung,exynos-bus nodes),
 - bus-width property replaced with samsung,data-clk-ratio,
 - adaptation to recent changes in the interconnect code
   (of_icc_get_from_provider(), icc_node_add()).

Changes since v5:
 - addition of "bus-width: DT property, which specifies data width
   of the interconnect bus (patches 1...2/6),
 - addition of synchronization of the interconnect bandwidth setting
   with VSYNC (patch 6/6).

Changes since v3 [4] (v4 skipped to align with patchset [1]), detailed
changes are listed in patches:
 - conversion to a separate interconnect (platform) driver,
 - an update of the DT binding documenting new optional properties:
   #interconnect-cells, samsung,interconnect-parent in "samsung,exynos-bus"
   nodes,
 - new DT properties added to the SoC, rather than to the board specific
   files.

Changes since v2 [5]:
 - Use icc_std_aggregate().
 - Implement a different modification of apply_constraints() in
   drivers/interconnect/core.c (patch 03).
 - Use 'exynos,interconnect-parent-node' in the DT instead of
   'devfreq'/'parent', depending on the bus.
 - Rebase on DT patches that deprecate the 'devfreq' DT property.
 - Improve error handling, including freeing generated IDs on failure.
 - Remove exynos_bus_icc_connect() and add exynos_bus_icc_get_parent().

Changes since v1 [6]:
 - Rebase on coupled regulators patches.
 - Use dev_pm_qos_*() API instead of overriding frequency in
   exynos_bus_target().
 - Use IDR for node ID allocation.
 - Reverse order of multiplication and division in
   mixer_set_memory_bandwidth() (patch 07) to avoid integer overflow.


References:
[1] https://patchwork.kernel.org/patch/10861757/ (original issue)
[2] https://www.spinics.net/lists/linux-samsung-soc/msg70014.html
[3] https://www.spinics.net/lists/arm-kernel/msg810722.html
[4] https://lore.kernel.org/linux-pm/20191220115653.6487-1-a.swigon@samsung.com
[5] https://patchwork.kernel.org/cover/11054417/ (v1 of this RFC)
[6] https://patchwork.kernel.org/cover/11152595/ (v2 of this RFC)


Sylwester Nawrocki (5):
  dt-bindings: devfreq: Add documentation for the interconnect
    properties
  interconnect: Add generic interconnect driver for Exynos SoCs
  MAINTAINERS: Add entry for Samsung interconnect drivers
  PM / devfreq: exynos-bus: Add registration of interconnect child
    device
  drm: exynos: mixer: Add interconnect support

 .../devicetree/bindings/devfreq/exynos-bus.txt     |  71 +++++++-
 MAINTAINERS                                        |   8 +
 drivers/devfreq/exynos-bus.c                       |  17 ++
 drivers/gpu/drm/exynos/exynos_mixer.c              | 146 ++++++++++++++-
 drivers/interconnect/Kconfig                       |   1 +
 drivers/interconnect/Makefile                      |   1 +
 drivers/interconnect/samsung/Kconfig               |  13 ++
 drivers/interconnect/samsung/Makefile              |   4 +
 drivers/interconnect/samsung/exynos.c              | 199 +++++++++++++++++++++
 9 files changed, 450 insertions(+), 10 deletions(-)
 create mode 100644 drivers/interconnect/samsung/Kconfig
 create mode 100644 drivers/interconnect/samsung/Makefile
 create mode 100644 drivers/interconnect/samsung/exynos.c

-- 
2.7.4




More information about the linux-arm-kernel mailing list