[PATCH] arm64: dts: zynqmp: Wire mailbox with zynqmp-power driver

Michal Simek michal.simek at xilinx.com
Thu Nov 12 07:52:34 EST 2020


The support to driver was added by commit ffdbae28d9d1 ("drivers: soc:
xilinx: Use mailbox IPI callback") that's why also enable it via DT by
default. It setups communication with firmware via IPI interface.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 66dad22b8a76..68923fbd0e89 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -99,6 +99,29 @@ opp03 {
 		};
 	};
 
+	zynqmp_ipi {
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		interrupt-parent = <&gic>;
+		interrupts = <0 35 4>;
+		xlnx,ipi-id = <0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipi_mailbox_pmu1: mailbox at ff990400 {
+			reg = <0x0 0xff9905c0 0x0 0x20>,
+			      <0x0 0xff9905e0 0x0 0x20>,
+			      <0x0 0xff990e80 0x0 0x20>,
+			      <0x0 0xff990ea0 0x0 0x20>;
+			reg-names = "local_request_region",
+				    "local_response_region",
+				    "remote_request_region",
+				    "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <4>;
+		};
+	};
+
 	dcc: dcc {
 		compatible = "arm,dcc";
 		status = "disabled";
@@ -128,6 +151,8 @@ zynqmp_power: zynqmp-power {
 				compatible = "xlnx,zynqmp-power";
 				interrupt-parent = <&gic>;
 				interrupts = <0 35 4>;
+				mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
+				mbox-names = "tx", "rx";
 			};
 
 			zynqmp_clk: clock-controller {
-- 
2.29.2




More information about the linux-arm-kernel mailing list