[PATCH v2 1/7] dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"

Rob Herring robh at kernel.org
Wed Nov 11 16:28:57 EST 2020


On Mon, Nov 09, 2020 at 10:34:03PM +0530, Kishon Vijay Abraham I wrote:
> Add binding documentation for "syscon" which should be a subnode of
> the system controller (scm-conf).
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> index 19fcf59fd2fe..0b115b707ab2 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> @@ -50,6 +50,38 @@ patternProperties:
>        specified in
>        Documentation/devicetree/bindings/mux/reg-mux.txt
>  
> +  "^syscon@[0-9a-f]+$":
> +    type: object
> +    description: |

Don't need '|' if there's no formatting.

> +      This is the system controller configuration required to configure PCIe
> +      mode, lane width and speed.
> +
> +    properties:
> +      compatible:
> +        items:
> +          - enum:
> +              - ti,j721e-system-controller
> +          - const: syscon
> +          - const: simple-mfd

Humm, then what are this node's sub-nodes? And the same compatible as 
the parent?

> +
> +      reg:
> +        maxItems: 1
> +
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 1
> +
> +      ranges: true
> +
> +    required:
> +      - compatible
> +      - reg
> +      - "#address-cells"
> +      - "#size-cells"
> +      - ranges
> +
>  required:
>    - compatible
>    - reg
> @@ -72,5 +104,13 @@ examples:
>              compatible = "mmio-mux";
>              reg = <0x00004080 0x50>;
>          };
> +
> +        pcie1_ctrl: syscon at 4074 {
> +            compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> +            reg = <0x00004074 0x4>;
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges = <0x4074 0x4074 0x4>;

Must be packing a bunch of functions into 4 byte region!

> +        };
>      };
>  ...
> -- 
> 2.17.1
> 



More information about the linux-arm-kernel mailing list