[PATCH 2/2] arm64: defconfig: Enable ARM SCMI protocol and drivers

[Florian Fainelli]

Enable the ARM SCMI protocol and the common clock, cpufreq, reset and
sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to
provide support for CPU frequency scaling, clock configuration and
temperature and current sensors.

Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 arch/arm64/configs/defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5cfe3cf6f2ac..5fcd09e505b4 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -93,8 +93,10 @@ CONFIG_ARM_IMX_CPUFREQ_DT=m
 CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
 CONFIG_ARM_QCOM_CPUFREQ_HW=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
+CONFIG_ARM_SCMI_CPUFREQ=y
 CONFIG_ARM_TEGRA186_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
+CONFIG_ARM_SCMI_PROTOCOL=y
 CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_INTEL_STRATIX10_SERVICE=y
@@ -522,6 +524,7 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
+CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
@@ -865,6 +868,7 @@ CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_SPI=y
 CONFIG_CROS_EC_CHARDEV=m
+CONFIG_COMMON_CLK_SCMI=y
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
-- 
2.25.1