[PATCH V2 5/5] arm64: dts: imx8mn: Add GPU node

[Krzysztof Kozlowski]

On Sat, Nov 07, 2020 at 08:00:25AM -0600, Adam Ford wrote:
> According to the documentation from NXP, the i.MX8M Nano has a
> Vivante GC7000 Ultra Lite as its GPU core.
> 
> With this patch, the Etnaviv driver presents the GPU as:
>    etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
> 
> The stock operating voltage for the i.MX8M Nano is .85V which means
> the GPU needs to run at 400MHz.  For boards where the operating
> voltage is higher, this can be increased.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> ---
> V2:  Move into this series
>      Update clocking description
> 
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 5e4b6934de40..6e650ea422a7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -1008,6 +1008,31 @@ gpmi: nand-controller at 33002000 {
>  			status = "disabled";
>  		};
>  
> +		gpu: gpu at 38000000 {
> +			compatible = "vivante,gc";
> +			reg = <0x38000000 0x8000>;
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk IMX8MN_CLK_GPU_AHB>,
> +				<&clk IMX8MN_CLK_GPU_BUS_ROOT>,
> +				<&clk IMX8MN_CLK_GPU_CORE_ROOT>,
> +				<&clk IMX8MN_CLK_GPU_SHADER_DIV>;
> +			clock-names = "reg", "bus", "core", "shader";
> +			assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
> +					  <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
> +					  <&clk IMX8MN_CLK_GPU_AXI>,
> +					  <&clk IMX8MN_CLK_GPU_AHB>,
> +					  <&clk IMX8MN_GPU_PLL>,
> +					  <&clk IMX8MN_CLK_GPU_CORE_DIV>,
> +					  <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
> +			assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
> +						  <&clk IMX8MN_GPU_PLL_OUT>,
> +						  <&clk IMX8MN_SYS_PLL1_800M>,
> +						  <&clk IMX8MN_SYS_PLL1_800M>;
> +			assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
> +				<400000000>, <400000000>;

It would be nice to align indentation here to <0> above.

Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>

Best regards,
Krzysztof