[PATCH v3 05/11] clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics

[Claudiu Beznea]

From: Eugen Hristev <eugen.hristev at microchip.com>

This SoC has the 5th divisor for the mck0 master clock.
Adapt the characteristics accordingly.

Reported-by: Mihai Sain <mihai.sain at microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/clk/at91/sama7g5.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index d3c3469d47d9..d685e22b2014 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -775,13 +775,13 @@ static const struct clk_pll_characteristics pll_characteristics = {
 /* MCK0 characteristics. */
 static const struct clk_master_characteristics mck0_characteristics = {
 	.output = { .min = 140000000, .max = 200000000 },
-	.divisors = { 1, 2, 4, 3 },
+	.divisors = { 1, 2, 4, 3, 5 },
 	.have_div3_pres = 1,
 };
 
 /* MCK0 layout. */
 static const struct clk_master_layout mck0_layout = {
-	.mask = 0x373,
+	.mask = 0x773,
 	.pres_shift = 4,
 	.offset = 0x28,
 };
-- 
2.7.4