[PATCH v4 0/5] STUSB1600 support on STM32MP15xx-DKx

[Amelie Delaunay]

This series adds missing bindings for Type-C typec-power-opmode property
and STUSB160x Type-C port controllers [1].
STUSB160x driver requires to get power operation mode via device tree,
that's why this series also adds the optional DT property
typec-power-opmode for usb-c-connector to select the power operation mode
capability.
Tested on stm32mp157c-dk2 [2], which has a Type-C connector managed by
STUSB1600, and connected to USB OTG controller. 

[1] https://www.st.com/en/interfaces-and-transceivers/usb-type-c-and-power-delivery-controllers.html
[2] https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html

Amelie Delaunay (4):
  dt-bindings: connector: add power-opmode optional property to
    usb-connector
  dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
  usb: typec: stusb160x: fix power-opmode property with
    typec-power-opmode
  ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
  ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller
    support

---
Changes in v4:
- power-opmode DT property renamed to typec-power-opmode and mutually
  exclusive condition with new-source-frs-typec-current added
- Due to DT property renaming, patch 3/5 is added to update stusb160x
  driver.
---
 .../bindings/connector/usb-connector.yaml     | 24 ++++++
 .../devicetree/bindings/usb/st,stusb160x.yaml | 85 +++++++++++++++++++
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  7 ++
 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi        | 30 +++++++
 arch/arm/configs/multi_v7_defconfig           |  2 +
 drivers/usb/typec/stusb160x.c                 |  2 +-
 6 files changed, 149 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml

-- 
2.17.1