[PATCH v5 3/4] ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board

[Hugues Fruchet]

Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5).

Signed-off-by: Hugues Fruchet <hugues.fruchet at st.com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 85628e1..6cc5d2a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -90,6 +90,7 @@
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov5640_0>;
+			bus-type = <5>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
-- 
2.7.4