[PATCH v1] dt-bindings: arm: stm32: lxa, stm32mp157c-mc1: add extra SiP compatible

[Ahmad Fatoum]

The Linux Automation MC-1 is built around a SIP with CPU, RAM, PMIC,
Oscillator and EEPROM. Add a further compatible identifying the SiP,
so boot firmware can match against it to apply fixups if necessary.

To avoid intermittent dtbs_check breakage in the sole upstream device
tree that uses that SiP, patch it here as well.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
I know that bindings and device tree patches should be separate. Does
this apply here as well? Should I split the dts change into a follow-up
commit? Is it ok that dtbs_check will report an intermittent breakage?
---
 Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 8 +++++++-
 arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts              | 2 +-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 009b424e456e..9127094f0208 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -40,7 +40,6 @@ properties:
       - items:
           - enum:
               - arrow,stm32mp157a-avenger96 # Avenger96
-              - lxa,stm32mp157c-mc1
               - shiratech,stm32mp157a-iot-box # IoT Box
               - shiratech,stm32mp157a-stinger96 # Stinger96
               - st,stm32mp157c-ed1
@@ -52,6 +51,13 @@ properties:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
+      - description: Octavo OSD32MP15x System-in-Package based boards
+        items:
+          - enum:
+              - lxa,stm32mp157c-mc1 # Linux Automation MC-1
+          - const: oct,stm32mp15xx-osd32
+          - enum:
+              - st,stm32mp157
       - description: Odyssey STM32MP1 SoM based Boards
         items:
           - enum:
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 1e5333fd437f..cda8e871f999 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -15,7 +15,7 @@
 
 / {
 	model = "Linux Automation MC-1 board";
-	compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
+	compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp15xx-osd32", "st,stm32mp157";
 
 	aliases {
 		ethernet0 = &ethernet0;
-- 
2.28.0