[PATCH 1/2] dt-bindings: usb: mediatek,mtk-xhci: add keep-clock-on

[Macpaul Lin]

Option "mediatek,keep-clock-on" means to keep clock on during system
suspend and resume. Some platform will flush register settings if clock has
been disabled when system is suspended. Set this option to avoid clock off.

Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
 .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index ea696c8..a956dde 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -104,6 +104,12 @@ properties:
     description: enable USB remote wakeup, see power/wakeup-source.txt
     type: boolean
 
+  mediatek,keep-clock-on:
+    description: |
+      Keep clock on during system suspend and resume. Some platform will flush
+      register settings if clock has been disabled when system is suspended.
+    type: boolean
+
   mediatek,syscon-wakeup:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 1
@@ -175,6 +181,7 @@ examples:
         imod-interval-ns = <10000>;
         mediatek,syscon-wakeup = <&pericfg 0x400 1>;
         wakeup-source;
+        mediatek,keep-clock-on;
         usb3-lpm-capable;
     };
 ...
-- 
1.7.9.5