[PATCH net] arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC

[Vladimir Oltean]

On Sun, Nov 01, 2020 at 02:19:05PM +0100, Michael Walle wrote:
> Since commit 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") the
> network port of the Kontron sl28 board is broken. After the migration to
> phylink the device tree has to specify the in-band-mode property. Add
> it.
> 
> Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX")
> Suggested-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> Signed-off-by: Michael Walle <michael at walle.cc>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean at nxp.com>

>  arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> index f46eb47cfa4d..8161dd237971 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> @@ -75,6 +75,7 @@
>  &enetc_port0 {
>  	phy-handle = <&phy0>;
>  	phy-connection-type = "sgmii";
> +	managed = "in-band-status";
>  	status = "okay";
>  
>  	mdio {
> -- 
> 2.20.1
>