[PATCH v4 11/14] arm64: Use additional memcpy macros and fixups
Oliver Swede
oli.swede at arm.com
Tue Jun 30 15:48:19 EDT 2020
The Arm-provided memcpy routine has been updated with more recent
optimizations. The kernel's helper functions for copying to/from
user space memory, which import this algorithm and create
exception table entries for instructions that reference user
space, require new recovery code to accurately determine the number
of bytes that successfully copied before a page fault.
This adds new macro instantiations in the copy template, and
corresponding definitions to each of the copy_*_user() functions.
This allows more fixup routines to be added so that an accurate value
for the number of bytes that failed to copy can be returned.
This increases the flexibility of the fixup code, as certain
propertes can be encapsulated by the mapping to implicitly provide
the routines with more information than would otherwise be available.
In the case of the current memcpy, the number of bytes already copied
depends highly on the type of instruction that caused the fault (load
vs. store), so the use of separate fixups enables specific routines
for each case. This is an alternative to (for instance) using a
single fixup for both the loads and stores, as this would be subject
to issues relating to overlapping src and dst buffers in
copy_in_user().
The outcome also depends largely on other factors, such as if the
target address is specified relative to the start or end of the
buffer, and whether or not the store targets are guaranteed to be
16-byte aligned.
These characteristics (obtained from analysing the copy algorithm)
enable fixups to be written that are modular and accurate for each
case. The fixup logic should be straightforward to modify in the
future, e.g. if there are further improvements to the memcpy routine.
Signed-off-by: Oliver Swede <oli.swede at arm.com>
---
arch/arm64/lib/copy_from_user.S | 197 ++++++++++++++++++++++++--
arch/arm64/lib/copy_in_user.S | 205 ++++++++++++++++++++++++++--
arch/arm64/lib/copy_template.S | 126 ++++++++---------
arch/arm64/lib/copy_template_user.S | 20 +++
arch/arm64/lib/copy_to_user.S | 179 +++++++++++++++++++++++-
arch/arm64/lib/copy_user_fixup.S | 13 +-
arch/arm64/lib/memcpy.S | 80 +++++++++++
7 files changed, 728 insertions(+), 92 deletions(-)
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
index cd3042e98394..0056d1fc06eb 100644
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -19,17 +19,46 @@
* Returns:
* x0 - bytes not copied
*/
+
.macro ldrb1 reg, ptr, offset=0
- USER_F(9998f, ldtrb \reg, [\ptr, \offset])
+ USER_F(9993f, ldtrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb2 reg, ptr, offset=0
+ USER_F(9994f, ldtrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb3 reg, ptr, offset=0
+ USER_F(9995f, ldtrb \reg, [\ptr, \offset])
.endm
.macro strb1 reg, ptr, offset=0
strb \reg, [\ptr, \offset]
.endm
+ .macro strb2 reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
+ .macro strb3 reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
.macro ldrb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
- USER_F(9998f, ldtrb \reg, [\ptr])
+ USER_F(9993f, ldtrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro ldrb2_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
+ USER_F(9994f, ldtrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro ldrb3_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
+ USER_F(9995f, ldtrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
@@ -37,26 +66,80 @@
strb \reg, [\ptr, \offset]
.endm
+ .macro strb2_reg reg, ptr, offset
+ strb \reg, [\ptr, \offset]
+ .endm
+
+ .macro strb3_reg reg, ptr, offset
+ strb \reg, [\ptr, \offset]
+ .endm
+
.macro ldr1 reg, ptr, offset=0
- USER_F(9998f, ldtr \reg, [\ptr, \offset])
+ USER_F(9993f, ldtr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr2 reg, ptr, offset=0
+ USER_F(9994f, ldtr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr3 reg, ptr, offset=0
+ USER_F(9995f, ldtr \reg, [\ptr, \offset])
.endm
.macro str1 reg, ptr, offset=0
str \reg, [\ptr, \offset]
.endm
+ .macro str2 reg, ptr, offset=0
+ str \reg, [\ptr, \offset]
+ .endm
+
+ .macro str3 reg, ptr, offset=0
+ str \reg, [\ptr, \offset]
+ .endm
+
.macro ldp1 regA, regB, ptr, offset=0
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9993f, ldtr \regA, [\ptr, \offset])
+ USER_F(9993f, ldtr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro ldp2 regA, regB, ptr, offset=0
+ USER_F(9994f, ldtr \regA, [\ptr, \offset])
+ USER_F(9994f, ldtr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro ldp3 regA, regB, ptr, offset=0
+ USER_F(9995f, ldtr \regA, [\ptr, \offset])
+ USER_F(9995f, ldtr \regB, [\ptr, \offset + 8])
.endm
.macro stp1 regA, regB, ptr, offset=0
stp \regA, \regB, [\ptr, \offset]
.endm
+ .macro stp2 regA, regB, ptr, offset=0
+ stp \regA, \regB, [\ptr, \offset]
+ .endm
+
+ .macro stp3 regA, regB, ptr, offset=0
+ stp \regA, \regB, [\ptr, \offset]
+ .endm
+
.macro ldp1_pre regA, regB, ptr, offset
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9993f, ldtr \regA, [\ptr, \offset])
+ USER_F(9993f, ldtr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro ldp2_pre regA, regB, ptr, offset
+ USER_F(9994f, ldtr \regA, [\ptr, \offset])
+ USER_F(9994f, ldtr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro ldp3_pre regA, regB, ptr, offset
+ USER_F(9995f, ldtr \regA, [\ptr, \offset])
+ USER_F(9995f, ldtr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
.endm
@@ -64,46 +147,134 @@
stp \regA, \regB, [\ptr, \offset]!
.endm
+ .macro stp2_pre regA, regB, ptr, offset
+ stp \regA, \regB, [\ptr, \offset]!
+ .endm
+
+ .macro stp3_pre regA, regB, ptr, offset
+ stp \regA, \regB, [\ptr, \offset]!
+ .endm
+
.macro ldrb1_nuao reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9993f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb2_nuao reg, ptr, offset=0
+ USER_F(9994f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb3_nuao reg, ptr, offset=0
+ USER_F(9995f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao reg, ptr, offset=0
strb \reg, [\ptr, \offset]
.endm
+ .macro strb2_nuao reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
+ .macro strb3_nuao reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
.macro ldrb1_nuao_reg reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9993f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb2_nuao_reg reg, ptr, offset=0
+ USER_F(9994f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb3_nuao_reg reg, ptr, offset=0
+ USER_F(9995f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao_reg reg, ptr, offset=0
strb \reg, [\ptr, \offset]
.endm
+ .macro strb2_nuao_reg reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
+ .macro strb3_nuao_reg reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
.macro ldr1_nuao reg, ptr, offset=0
- USER_F(9998f, ldr \reg, [\ptr, \offset])
+ USER_F(9993f, ldr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr2_nuao reg, ptr, offset=0
+ USER_F(9994f, ldr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr3_nuao reg, ptr, offset=0
+ USER_F(9995f, ldr \reg, [\ptr, \offset])
.endm
.macro str1_nuao reg, ptr, offset=0
str \reg, [\ptr, \offset]
.endm
- .macro ldp1_nuao regA, regB, ptr, offset=0
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset])
+ .macro str2_nuao reg, ptr, offset=0
+ str \reg, [\ptr, \offset]
+ .endm
+
+ .macro str3_nuao reg, ptr, offset=0
+ str \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldp1_nuao regA, regB, ptr, offset=0
+ USER_F(9993f, ldp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro ldp2_nuao regA, regB, ptr, offset=0
+ USER_F(9994f, ldp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro ldp3_nuao regA, regB, ptr, offset=0
+ USER_F(9995f, ldp \regA, \regB, [\ptr, \offset])
.endm
.macro stp1_nuao regA, regB, ptr, offset=0
stp \regA, \regB, [\ptr, \offset]
.endm
+ .macro stp2_nuao regA, regB, ptr, offset=0
+ stp \regA, \regB, [\ptr, \offset]
+ .endm
+
+ .macro stp3_nuao regA, regB, ptr, offset=0
+ stp \regA, \regB, [\ptr, \offset]
+ .endm
+
.macro ldp1_pre_nuao regA, regB, ptr, offset
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset]!)
+ USER_F(9993f, ldp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro ldp2_pre_nuao regA, regB, ptr, offset
+ USER_F(9994f, ldp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro ldp3_pre_nuao regA, regB, ptr, offset
+ USER_F(9995f, ldp \regA, \regB, [\ptr, \offset]!)
.endm
.macro stp1_pre_nuao regA, regB, ptr, offset
stp \regA, \regB, [\ptr, \offset]!
.endm
+ .macro stp2_pre_nuao regA, regB, ptr, offset
+ stp \regA, \regB, [\ptr, \offset]!
+ .endm
+
+ .macro stp3_pre_nuao regA, regB, ptr, offset
+ stp \regA, \regB, [\ptr, \offset]!
+ .endm
+
.macro copy_exit
b .Luaccess_finish
.endm
diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S
index fe035e513b34..4511f59dd979 100644
--- a/arch/arm64/lib/copy_in_user.S
+++ b/arch/arm64/lib/copy_in_user.S
@@ -21,93 +21,274 @@
* Returns:
* x0 - bytes not copied
*/
+
.macro ldrb1 reg, ptr, offset=0
- USER_F(9998f, ldtrb \reg, [\ptr, \offset])
+ USER_F(9993f, ldtrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb2 reg, ptr, offset=0
+ USER_F(9994f, ldtrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb3 reg, ptr, offset=0
+ USER_F(9995f, ldtrb \reg, [\ptr, \offset])
.endm
.macro strb1 reg, ptr, offset=0
+ USER_F(9996f, sttrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb2 reg, ptr, offset=0
+ USER_F(9997f, sttrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb3 reg, ptr, offset=0
USER_F(9998f, sttrb \reg, [\ptr, \offset])
.endm
.macro ldrb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
- USER_F(9998f, ldtrb \reg, [\ptr])
+ USER_F(9993f, ldtrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro ldrb2_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
+ USER_F(9994f, ldtrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro ldrb3_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
+ USER_F(9995f, ldtrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
.macro strb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
+ USER_F(9996f, sttrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro strb2_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
+ USER_F(9997f, sttrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro strb3_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
USER_F(9998f, sttrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
.macro ldr1 reg, ptr, offset=0
- USER_F(9998f, ldtr \reg, [\ptr, \offset])
+ USER_F(9993f, ldtr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr2 reg, ptr, offset=0
+ USER_F(9994f, ldtr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr3 reg, ptr, offset=0
+ USER_F(9995f, ldtr \reg, [\ptr, \offset])
.endm
.macro str1 reg, ptr, offset=0
+ USER_F(9996f, sttr \reg, [\ptr, \offset])
+ .endm
+
+ .macro str2 reg, ptr, offset=0
+ USER_F(9997f, sttr \reg, [\ptr, \offset])
+ .endm
+
+ .macro str3 reg, ptr, offset=0
USER_F(9998f, sttr \reg, [\ptr, \offset])
.endm
.macro ldp1 regA, regB, ptr, offset=0
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9993f, ldtr \regA, [\ptr, \offset])
+ USER_F(9993f, ldtr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro ldp2 regA, regB, ptr, offset=0
+ USER_F(9994f, ldtr \regA, [\ptr, \offset])
+ USER_F(9994f, ldtr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro ldp3 regA, regB, ptr, offset=0
+ USER_F(9995f, ldtr \regA, [\ptr, \offset])
+ USER_F(9995f, ldtr \regB, [\ptr, \offset + 8])
.endm
.macro stp1 regA, regB, ptr, offset=0
+ USER_F(9996f, sttr \regA, [\ptr, \offset])
+ USER_F(9996f, sttr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro stp2 regA, regB, ptr, offset=0
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro stp3 regA, regB, ptr, offset=0
USER_F(9998f, sttr \regA, [\ptr, \offset])
USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
.endm
.macro ldp1_pre regA, regB, ptr, offset
- USER_F(9998f, ldtr \regA, [\ptr, \offset])
- USER_F(9998f, ldtr \regB, [\ptr, \offset + 8])
+ USER_F(9993f, ldtr \regA, [\ptr, \offset])
+ USER_F(9993f, ldtr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro ldp2_pre regA, regB, ptr, offset
+ USER_F(9994f, ldtr \regA, [\ptr, \offset])
+ USER_F(9994f, ldtr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro ldp3_pre regA, regB, ptr, offset
+ USER_F(9995f, ldtr \regA, [\ptr, \offset])
+ USER_F(9995f, ldtr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
.endm
.macro stp1_pre regA, regB, ptr, offset
+ USER_F(9996f, sttr \regA, [\ptr, \offset])
+ USER_F(9996f, sttr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro stp2_pre regA, regB, ptr, offset
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro stp3_pre regA, regB, ptr, offset
USER_F(9998f, sttr \regA, [\ptr, \offset])
USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
.endm
.macro ldrb1_nuao reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9993f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb2_nuao reg, ptr, offset=0
+ USER_F(9994f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb3_nuao reg, ptr, offset=0
+ USER_F(9995f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao reg, ptr, offset=0
+ USER_F(9996f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb2_nuao reg, ptr, offset=0
+ USER_F(9997f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb3_nuao reg, ptr, offset=0
USER_F(9998f, strb \reg, [\ptr, \offset])
.endm
.macro ldrb1_nuao_reg reg, ptr, offset=0
- USER_F(9998f, ldrb \reg, [\ptr, \offset])
+ USER_F(9993f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb2_nuao_reg reg, ptr, offset=0
+ USER_F(9994f, ldrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldrb3_nuao_reg reg, ptr, offset=0
+ USER_F(9995f, ldrb \reg, [\ptr, \offset])
.endm
.macro strb1_nuao_reg reg, ptr, offset=0
+ USER_F(9996f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb2_nuao_reg reg, ptr, offset=0
+ USER_F(9997f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb3_nuao_reg reg, ptr, offset=0
USER_F(9998f, strb \reg, [\ptr, \offset])
.endm
.macro ldr1_nuao reg, ptr, offset=0
- USER_F(9998f, ldr \reg, [\ptr, \offset])
+ USER_F(9993f, ldr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr2_nuao reg, ptr, offset=0
+ USER_F(9994f, ldr \reg, [\ptr, \offset])
+ .endm
+
+ .macro ldr3_nuao reg, ptr, offset=0
+ USER_F(9995f, ldr \reg, [\ptr, \offset])
.endm
.macro str1_nuao reg, ptr, offset=0
+ USER_F(9996f, str \reg, [\ptr, \offset])
+ .endm
+
+ .macro str2_nuao reg, ptr, offset=0
+ USER_F(9997f, str \reg, [\ptr, \offset])
+ .endm
+
+ .macro str3_nuao reg, ptr, offset=0
USER_F(9998f, str \reg, [\ptr, \offset])
.endm
.macro ldp1_nuao regA, regB, ptr, offset=0
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset])
+ USER_F(9993f, ldp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro ldp2_nuao regA, regB, ptr, offset=0
+ USER_F(9994f, ldp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro ldp3_nuao regA, regB, ptr, offset=0
+ USER_F(9995f, ldp \regA, \regB, [\ptr, \offset])
.endm
.macro stp1_nuao regA, regB, ptr, offset=0
+ USER_F(9996f, stp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro stp2_nuao regA, regB, ptr, offset=0
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro stp3_nuao regA, regB, ptr, offset=0
USER_F(9998f, stp \regA, \regB, [\ptr, \offset])
.endm
.macro ldp1_pre_nuao regA, regB, ptr, offset
- USER_F(9998f, ldp \regA, \regB, [\ptr, \offset]!)
+ USER_F(9993f, ldp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro ldp2_pre_nuao regA, regB, ptr, offset
+ USER_F(9994f, ldp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro ldp3_pre_nuao regA, regB, ptr, offset
+ USER_F(9995f, ldp \regA, \regB, [\ptr, \offset]!)
.endm
.macro stp1_pre_nuao regA, regB, ptr, offset
+ USER_F(9996f, stp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro stp2_pre_nuao regA, regB, ptr, offset
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro stp3_pre_nuao regA, regB, ptr, offset
USER_F(9998f, stp \regA, \regB, [\ptr, \offset]!)
.endm
diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
index 90b5f63ff227..0c3e39ae906d 100644
--- a/arch/arm64/lib/copy_template.S
+++ b/arch/arm64/lib/copy_template.S
@@ -58,18 +58,18 @@
cmp count, 16
b.lo L(copy16)
ldp1 A_l, A_h, src
- ldp1 D_l, D_h, srcend, -16
+ ldp2 D_l, D_h, srcend, -16
stp1 A_l, A_h, dstin
- stp1 D_l, D_h, dstend, -16
+ stp2 D_l, D_h, dstend, -16
copy_exit
/* Copy 8-15 bytes. */
L(copy16):
tbz count, 3, L(copy8)
ldr1 A_l, src
- ldr1 A_h, srcend, -8
+ ldr2 A_h, srcend, -8
str1 A_l, dstin
- str1 A_h, dstend, -8
+ str2 A_h, dstend, -8
copy_exit
.p2align 3
@@ -77,9 +77,9 @@ L(copy16):
L(copy8):
tbz count, 2, L(copy4)
ldr1 A_lw, src
- ldr1 B_lw, srcend, -4
+ ldr2 B_lw, srcend, -4
str1 A_lw, dstin
- str1 B_lw, dstend, -4
+ str2 B_lw, dstend, -4
copy_exit
/* Copy 0..3 bytes using a branchless sequence. */
@@ -87,11 +87,11 @@ L(copy4):
cbz count, L(copy0)
lsr tmp1, count, 1
ldrb1 A_lw, src
- ldrb1 C_lw, srcend, -1
+ ldrb2 C_lw, srcend, -1
ldrb1_reg B_lw, src, tmp1
strb1 A_lw, dstin
strb1_reg B_lw, dstin, tmp1
- strb1 C_lw, dstend, -1
+ strb2 C_lw, dstend, -1
L(copy0):
copy_exit
@@ -100,14 +100,14 @@ L(copy0):
L(copy32_128):
ldp1 A_l, A_h, src
ldp1 B_l, B_h, src, 16
- ldp1 C_l, C_h, srcend, -32
- ldp1 D_l, D_h, srcend, -16
+ ldp2 C_l, C_h, srcend, -32
+ ldp2 D_l, D_h, srcend, -16
cmp count, 64
b.hi L(copy128)
stp1 A_l, A_h, dstin
stp1 B_l, B_h, dstin, 16
- stp1 C_l, C_h, dstend, -32
- stp1 D_l, D_h, dstend, -16
+ stp2 C_l, C_h, dstend, -32
+ stp2 D_l, D_h, dstend, -16
copy_exit
.p2align 4
@@ -117,17 +117,17 @@ L(copy128):
ldp1 F_l, F_h, src, 48
cmp count, 96
b.ls L(copy96)
- ldp1 G_l, G_h, srcend, -64
- ldp1 H_l, H_h, srcend, -48
- stp1 G_l, G_h, dstend, -64
- stp1 H_l, H_h, dstend, -48
+ ldp2 G_l, G_h, srcend, -64
+ ldp2 H_l, H_h, srcend, -48
+ stp2 G_l, G_h, dstend, -64
+ stp2 H_l, H_h, dstend, -48
L(copy96):
stp1 A_l, A_h, dstin
stp1 B_l, B_h, dstin, 16
stp1 E_l, E_h, dstin, 32
stp1 F_l, F_h, dstin, 48
- stp1 C_l, C_h, dstend, -32
- stp1 D_l, D_h, dstend, -16
+ stp2 C_l, C_h, dstend, -32
+ stp2 D_l, D_h, dstend, -16
copy_exit
.p2align 4
@@ -146,83 +146,85 @@ L(copy_long):
bic dst, dstin, 15
sub src, src, tmp1
add count, count, tmp1 /* Count is now 16 too large. */
- ldp1 A_l, A_h, src, 16
+ ldp3 A_l, A_h, src, 16
stp1 D_l, D_h, dstin
- ldp1 B_l, B_h, src, 32
- ldp1 C_l, C_h, src, 48
- ldp1_pre D_l, D_h, src, 64
+ ldp3 B_l, B_h, src, 32
+ ldp3 C_l, C_h, src, 48
+ ldp3_pre D_l, D_h, src, 64
subs count, count, 128 + 16 /* Test and readjust count. */
b.ls L(copy64_from_end)
L(loop64):
- stp1 A_l, A_h, dst, 16
- ldp1 A_l, A_h, src, 16
- stp1 B_l, B_h, dst, 32
- ldp1 B_l, B_h, src, 32
- stp1 C_l, C_h, dst, 48
- ldp1 C_l, C_h, src, 48
- stp1_pre D_l, D_h, dst, 64
- ldp1_pre D_l, D_h, src, 64
+ stp3 A_l, A_h, dst, 16
+ ldp3 A_l, A_h, src, 16
+ stp3 B_l, B_h, dst, 32
+ ldp3 B_l, B_h, src, 32
+ stp3 C_l, C_h, dst, 48
+ ldp3 C_l, C_h, src, 48
+ stp3_pre D_l, D_h, dst, 64
+ ldp3_pre D_l, D_h, src, 64
subs count, count, 64
b.hi L(loop64)
/* Write the last iteration and copy 64 bytes from the end. */
L(copy64_from_end):
- ldp1 E_l, E_h, srcend, -64
- stp1 A_l, A_h, dst, 16
- ldp1 A_l, A_h, srcend, -48
- stp1 B_l, B_h, dst, 32
- ldp1 B_l, B_h, srcend, -32
- stp1 C_l, C_h, dst, 48
- ldp1 C_l, C_h, srcend, -16
- stp1 D_l, D_h, dst, 64
- stp1 E_l, E_h, dstend, -64
- stp1 A_l, A_h, dstend, -48
- stp1 B_l, B_h, dstend, -32
- stp1 C_l, C_h, dstend, -16
+ ldp2 E_l, E_h, srcend, -64
+ stp3 A_l, A_h, dst, 16
+ ldp2 A_l, A_h, srcend, -48
+ stp3 B_l, B_h, dst, 32
+ ldp2 B_l, B_h, srcend, -32
+ stp3 C_l, C_h, dst, 48
+ ldp2 C_l, C_h, srcend, -16
+ stp3 D_l, D_h, dst, 64
+ stp2 E_l, E_h, dstend, -64
+ stp2 A_l, A_h, dstend, -48
+ stp2 B_l, B_h, dstend, -32
+ stp2 C_l, C_h, dstend, -16
copy_exit
.p2align 4
+
/* Large backwards copy for overlapping copies.
- Copy 16 bytes and then align dst to 16-byte alignment. */
+ Copy 16 bytes and then align dst to 16-byte alignment. */
L(copy_long_backwards):
- ldp1 D_l, D_h, srcend, -16
+ ldp2 D_l, D_h, srcend, -16
and tmp1, dstend, 15
sub srcend, srcend, tmp1
sub count, count, tmp1
- ldp1 A_l, A_h, srcend, -16
- stp1 D_l, D_h, dstend, -16
- ldp1 B_l, B_h, srcend, -32
- ldp1 C_l, C_h, srcend, -48
- ldp1_pre D_l, D_h, srcend, -64
+ ldp2 A_l, A_h, srcend, -16
+ stp2 D_l, D_h, dstend, -16
+ ldp2 B_l, B_h, srcend, -32
+ ldp2 C_l, C_h, srcend, -48
+ ldp2_pre D_l, D_h, srcend, -64
sub dstend, dstend, tmp1
subs count, count, 128
b.ls L(copy64_from_start)
L(loop64_backwards):
- stp1 A_l, A_h, dstend, -16
- ldp1 A_l, A_h, srcend, -16
- stp1 B_l, B_h, dstend, -32
- ldp1 B_l, B_h, srcend, -32
- stp1 C_l, C_h, dstend, -48
- ldp1 C_l, C_h, srcend, -48
- stp1_pre D_l, D_h, dstend, -64
- ldp1_pre D_l, D_h, srcend, -64
+ stp2 A_l, A_h, dstend, -16
+ ldp2 A_l, A_h, srcend, -16
+ stp2 B_l, B_h, dstend, -32
+ ldp2 B_l, B_h, srcend, -32
+ stp2 C_l, C_h, dstend, -48
+ ldp2 C_l, C_h, srcend, -48
+ stp2_pre D_l, D_h, dstend, -64
+ ldp2_pre D_l, D_h, srcend, -64
subs count, count, 64
b.hi L(loop64_backwards)
- /* Write the last iteration and copy 64 bytes from the start. */
+ /* Write the last iteration and copy 64 bytes from the start. */
L(copy64_from_start):
ldp1 G_l, G_h, src, 48
- stp1 A_l, A_h, dstend, -16
+ stp2 A_l, A_h, dstend, -16
ldp1 A_l, A_h, src, 32
- stp1 B_l, B_h, dstend, -32
+ stp2 B_l, B_h, dstend, -32
ldp1 B_l, B_h, src, 16
- stp1 C_l, C_h, dstend, -48
+ stp2 C_l, C_h, dstend, -48
ldp1 C_l, C_h, src
- stp1 D_l, D_h, dstend, -64
+ stp2 D_l, D_h, dstend, -64
stp1 G_l, G_h, dstin, 48
stp1 A_l, A_h, dstin, 32
stp1 B_l, B_h, dstin, 16
stp1 C_l, C_h, dstin
copy_exit
+
diff --git a/arch/arm64/lib/copy_template_user.S b/arch/arm64/lib/copy_template_user.S
index 1d13daf314b0..f36c77738e42 100644
--- a/arch/arm64/lib/copy_template_user.S
+++ b/arch/arm64/lib/copy_template_user.S
@@ -8,15 +8,35 @@
#include "copy_template.S"
#define ldp1 ldp1_nuao
+#define ldp2 ldp2_nuao
+#define ldp3 ldp3_nuao
#define ldp1_pre ldp1_pre_nuao
+#define ldp2_pre ldp2_pre_nuao
+#define ldp3_pre ldp3_pre_nuao
#define stp1 stp1_nuao
+#define stp2 stp2_nuao
+#define stp3 stp3_nuao
#define stp1_pre stp1_pre_nuao
+#define stp2_pre stp2_pre_nuao
+#define stp3_pre stp3_pre_nuao
#define ldr1 ldr1_nuao
+#define ldr2 ldr2_nuao
+#define ldr3 ldr3_nuao
#define str1 str1_nuao
+#define str2 str2_nuao
+#define str3 str3_nuao
#define ldrb1 ldrb1_nuao
+#define ldrb2 ldrb2_nuao
+#define ldrb3 ldrb3_nuao
#define strb1 strb1_nuao
+#define strb2 strb2_nuao
+#define strb3 strb3_nuao
#define ldrb1_reg ldrb1_nuao_reg
+#define ldrb2_reg ldrb2_nuao_reg
+#define ldrb3_reg ldrb3_nuao_reg
#define strb1_reg strb1_nuao_reg
+#define strb2_reg strb2_nuao_reg
+#define strb3_reg strb3_nuao_reg
L(copy_non_uao):
#undef L
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
index de0af211b3ba..969e2b4ac3bf 100644
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -19,11 +19,28 @@
* Returns:
* x0 - bytes not copied
*/
+
.macro ldrb1 reg, ptr, offset=0
ldrb \reg, [\ptr, \offset]
.endm
+ .macro ldrb2 reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldrb3 reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
.macro strb1 reg, ptr, offset=0
+ USER_F(9996f, sttrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb2 reg, ptr, offset=0
+ USER_F(9997f, sttrb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb3 reg, ptr, offset=0
USER_F(9998f, sttrb \reg, [\ptr, \offset])
.endm
@@ -31,8 +48,28 @@
ldrb \reg, [\ptr, \offset]
.endm
+ .macro ldrb2_reg reg, ptr, offset
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldrb3_reg reg, ptr, offset
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
.macro strb1_reg reg, ptr, offset
add \ptr, \ptr, \offset
+ USER_F(9996f, sttrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro strb2_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
+ USER_F(9997f, sttrb \reg, [\ptr])
+ sub \ptr, \ptr, \offset
+ .endm
+
+ .macro strb3_reg reg, ptr, offset
+ add \ptr, \ptr, \offset
USER_F(9998f, sttrb \reg, [\ptr])
sub \ptr, \ptr, \offset
.endm
@@ -41,7 +78,23 @@
ldr \reg, [\ptr, \offset]
.endm
+ .macro ldr2 reg, ptr, offset=0
+ ldr \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldr3 reg, ptr, offset=0
+ ldr \reg, [\ptr, \offset]
+ .endm
+
.macro str1 reg, ptr, offset=0
+ USER_F(9996f, sttr \reg, [\ptr, \offset])
+ .endm
+
+ .macro str2 reg, ptr, offset=0
+ USER_F(9997f, sttr \reg, [\ptr, \offset])
+ .endm
+
+ .macro str3 reg, ptr, offset=0
USER_F(9998f, sttr \reg, [\ptr, \offset])
.endm
@@ -49,7 +102,25 @@
ldp \regA, \regB, [\ptr, \offset]
.endm
+ .macro ldp2 regA, regB, ptr, offset=0
+ ldp \regA, \regB, [\ptr, \offset]
+ .endm
+
+ .macro ldp3 regA, regB, ptr, offset=0
+ ldp \regA, \regB, [\ptr, \offset]
+ .endm
+
.macro stp1 regA, regB, ptr, offset=0
+ USER_F(9996f, sttr \regA, [\ptr, \offset])
+ USER_F(9996f, sttr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro stp2 regA, regB, ptr, offset=0
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
+ .endm
+
+ .macro stp3 regA, regB, ptr, offset=0
USER_F(9998f, sttr \regA, [\ptr, \offset])
USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
.endm
@@ -58,7 +129,27 @@
ldp \regA, \regB, [\ptr, \offset]!
.endm
+ .macro ldp2_pre regA, regB, ptr, offset
+ ldp \regA, \regB, [\ptr, \offset]!
+ .endm
+
+ .macro ldp3_pre regA, regB, ptr, offset
+ ldp \regA, \regB, [\ptr, \offset]!
+ .endm
+
.macro stp1_pre regA, regB, ptr, offset
+ USER_F(9996f, sttr \regA, [\ptr, \offset])
+ USER_F(9996f, sttr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro stp2_pre regA, regB, ptr, offset
+ USER_F(9997f, sttr \regA, [\ptr, \offset])
+ USER_F(9997f, sttr \regB, [\ptr, \offset + 8])
+ add \ptr, \ptr, \offset
+ .endm
+
+ .macro stp3_pre regA, regB, ptr, offset
USER_F(9998f, sttr \regA, [\ptr, \offset])
USER_F(9998f, sttr \regB, [\ptr, \offset + 8])
add \ptr, \ptr, \offset
@@ -68,7 +159,23 @@
ldrb \reg, [\ptr, \offset]
.endm
+ .macro ldrb2_nuao reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldrb3_nuao reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
.macro strb1_nuao reg, ptr, offset=0
+ USER_F(9996f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb2_nuao reg, ptr, offset=0
+ USER_F(9997f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb3_nuao reg, ptr, offset=0
USER_F(9998f, strb \reg, [\ptr, \offset])
.endm
@@ -76,31 +183,95 @@
ldrb \reg, [\ptr, \offset]
.endm
+ .macro ldrb2_nuao_reg reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldrb3_nuao_reg reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
.macro strb1_nuao_reg reg, ptr, offset=0
- strb \reg, [\ptr, \offset]
+ USER_F(9996f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb2_nuao_reg reg, ptr, offset=0
+ USER_F(9997f, strb \reg, [\ptr, \offset])
+ .endm
+
+ .macro strb3_nuao_reg reg, ptr, offset=0
+ USER_F(9998f, strb \reg, [\ptr, \offset])
.endm
.macro ldr1_nuao reg, ptr, offset=0
ldr \reg, [\ptr, \offset]
.endm
+ .macro ldr2_nuao reg, ptr, offset=0
+ ldr \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldr3_nuao reg, ptr, offset=0
+ ldr \reg, [\ptr, \offset]
+ .endm
+
.macro str1_nuao reg, ptr, offset=0
+ USER_F(9996f, str \reg, [\ptr, \offset])
+ .endm
+
+ .macro str2_nuao reg, ptr, offset=0
+ USER_F(9997f, str \reg, [\ptr, \offset])
+ .endm
+
+ .macro str3_nuao reg, ptr, offset=0
USER_F(9998f, str \reg, [\ptr, \offset])
.endm
- .macro ldp1_nuao regA, regB, ptr, offset=0
+ .macro ldp1_nuao regA, regB, ptr, offset=0
ldp \regA, \regB, [\ptr, \offset]
.endm
- .macro ldp1_pre_nuao regA, regB, ptr, offset
- ldp \regA, \regB, [\ptr, \offset]!
+ .macro ldp2_nuao regA, regB, ptr, offset=0
+ ldp \regA, \regB, [\ptr, \offset]
+ .endm
+
+ .macro ldp3_nuao regA, regB, ptr, offset=0
+ ldp \regA, \regB, [\ptr, \offset]
.endm
.macro stp1_nuao regA, regB, ptr, offset=0
+ USER_F(9996f, stp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro stp2_nuao regA, regB, ptr, offset=0
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset])
+ .endm
+
+ .macro stp3_nuao regA, regB, ptr, offset=0
USER_F(9998f, stp \regA, \regB, [\ptr, \offset])
.endm
+ .macro ldp1_pre_nuao regA, regB, ptr, offset
+ ldp \regA, \regB, [\ptr, \offset]!
+ .endm
+
+ .macro ldp2_pre_nuao regA, regB, ptr, offset
+ ldp \regA, \regB, [\ptr, \offset]!
+ .endm
+
+ .macro ldp3_pre_nuao regA, regB, ptr, offset
+ ldp \regA, \regB, [\ptr, \offset]!
+ .endm
+
.macro stp1_pre_nuao regA, regB, ptr, offset
+ USER_F(9996f, stp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro stp2_pre_nuao regA, regB, ptr, offset
+ USER_F(9997f, stp \regA, \regB, [\ptr, \offset]!)
+ .endm
+
+ .macro stp3_pre_nuao regA, regB, ptr, offset
USER_F(9998f, stp \regA, \regB, [\ptr, \offset]!)
.endm
diff --git a/arch/arm64/lib/copy_user_fixup.S b/arch/arm64/lib/copy_user_fixup.S
index fe9f5ac19605..f878c8831b14 100644
--- a/arch/arm64/lib/copy_user_fixup.S
+++ b/arch/arm64/lib/copy_user_fixup.S
@@ -3,8 +3,19 @@
addr .req x15
.section .fixup,"ax"
.align 2
+9993:
+9994:
+9995:
+9996:
+9997:
9998:
- // TODO: add accurate fixup
+ /* Retrieve useful information & free the stack area */
+ ldr count, [sp, #16] // x2
add sp, sp, 32
+ /*
+ * Return the initial count as the (under-estimated) number
+ * of bytes that failed to copy
+ */
+ mov x0, count
ret
diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S
index c24925aef236..e8d9a0e809b8 100644
--- a/arch/arm64/lib/memcpy.S
+++ b/arch/arm64/lib/memcpy.S
@@ -30,42 +30,122 @@
ldrb \reg, [\ptr, \offset]
.endm
+ .macro ldrb2 reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldrb3 reg, ptr, offset=0
+ ldrb \reg, [\ptr, \offset]
+ .endm
+
.macro strb1 reg, ptr, offset=0
strb \reg, [\ptr, \offset]
.endm
+ .macro strb2 reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
+ .macro strb3 reg, ptr, offset=0
+ strb \reg, [\ptr, \offset]
+ .endm
+
.macro ldr1 reg, ptr, offset=0
ldr \reg, [\ptr, \offset]
.endm
+ .macro ldr2 reg, ptr, offset=0
+ ldr \reg, [\ptr, \offset]
+ .endm
+
+ .macro ldr3 reg, ptr, offset=0
+ ldr \reg, [\ptr, \offset]
+ .endm
+
.macro str1 reg, ptr, offset=0
str \reg, [\ptr, \offset]
.endm
+ .macro str2 reg, ptr, offset=0
+ str \reg, [\ptr, \offset]
+ .endm
+
+ .macro str3 reg, ptr, offset=0
+ str \reg, [\ptr, \offset]
+ .endm
+
.macro ldp1 regA, regB, ptr, offset=0
ldp \regA, \regB, [\ptr, \offset]
.endm
+ .macro ldp2 regA, regB, ptr, offset=0
+ ldp \regA, \regB, [\ptr, \offset]
+ .endm
+
+ .macro ldp3 regA, regB, ptr, offset=0
+ ldp \regA, \regB, [\ptr, \offset]
+ .endm
+
.macro stp1 regA, regB, ptr, offset=0
stp \regA, \regB, [\ptr, \offset]
.endm
+ .macro stp2 regA, regB, ptr, offset=0
+ stp \regA, \regB, [\ptr, \offset]
+ .endm
+
+ .macro stp3 regA, regB, ptr, offset=0
+ stp \regA, \regB, [\ptr, \offset]
+ .endm
+
.macro ldrb1_reg reg, ptr, offset
ldrb1 \reg, \ptr, \offset
.endm
+ .macro ldrb2_reg reg, ptr, offset
+ ldrb2 \reg, \ptr, \offset
+ .endm
+
+ .macro ldrb3_reg reg, ptr, offset
+ ldrb3 \reg, \ptr, \offset
+ .endm
+
.macro strb1_reg reg, ptr, offset
strb1 \reg, \ptr, \offset
.endm
+ .macro strb2_reg reg, ptr, offset
+ strb2 \reg, \ptr, \offset
+ .endm
+
+ .macro strb3_reg reg, ptr, offset
+ strb3 \reg, \ptr, \offset
+ .endm
+
.macro ldp1_pre regA, regB, ptr, offset
ldp \regA, \regB, [\ptr, \offset]!
.endm
+ .macro ldp2_pre regA, regB, ptr, offset
+ ldp \regA, \regB, [\ptr, \offset]!
+ .endm
+
+ .macro ldp3_pre regA, regB, ptr, offset
+ ldp \regA, \regB, [\ptr, \offset]!
+ .endm
+
.macro stp1_pre regA, regB, ptr, offset
stp \regA, \regB, [\ptr, \offset]!
.endm
+ .macro stp2_pre regA, regB, ptr, offset
+ stp \regA, \regB, [\ptr, \offset]!
+ .endm
+
+ .macro stp3_pre regA, regB, ptr, offset
+ stp \regA, \regB, [\ptr, \offset]!
+ .endm
+
.macro copy_exit
ret
.endm
--
2.17.1
More information about the linux-arm-kernel
mailing list