[PATCH v4 03/14] arm64: Import latest version of Cortex Strings' memcmp

Oliver Swede oli.swede at arm.com
Tue Jun 30 15:48:11 EDT 2020


From: Sam Tebbs <sam.tebbs at arm.com>

Import the latest version of Cortex Strings' memcmp function.

The upstream source is src/aarch64/memcmp.S as of commit f77e4c932b4f
in https://git.linaro.org/toolchain/cortex-strings.git.

Signed-off-by: Sam Tebbs <sam.tebbs at arm.com>
[ rm: update attribution, expand commit message ]
Signed-off-by: Robin Murphy <robin.murphy at arm.com>
Signed-off-by: Oliver Swede <oli.swede at arm.com>
---
 arch/arm64/lib/memcmp.S | 333 ++++++++++++++--------------------------
 1 file changed, 117 insertions(+), 216 deletions(-)

diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S
index c0671e793ea9..580dd0b12ccb 100644
--- a/arch/arm64/lib/memcmp.S
+++ b/arch/arm64/lib/memcmp.S
@@ -1,13 +1,12 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (C) 2013 ARM Ltd.
- * Copyright (C) 2013 Linaro.
+ * Copyright (c) 2013, 2018 Linaro Limited. All rights reserved.
+ * Copyright (c) 2017 ARM Ltd. All rights reserved.
  *
- * This code is based on glibc cortex strings work originally authored by Linaro
- * be found @
+ * This code is based on glibc Cortex Strings work originally authored by
+ * Linaro, found at:
  *
- * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
- * files/head:/src/aarch64/
+ * https://git.linaro.org/toolchain/cortex-strings.git
  */
 
 #include <linux/linkage.h>
@@ -25,223 +24,125 @@
 *  x0 - a compare result, maybe less than, equal to, or greater than ZERO
 */
 
+#define L(l) .L ## l
+
 /* Parameters and result.  */
-src1		.req	x0
-src2		.req	x1
-limit		.req	x2
-result		.req	x0
+#define src1		x0
+#define src2		x1
+#define limit		x2
+#define result		w0
 
 /* Internal variables.  */
-data1		.req	x3
-data1w		.req	w3
-data2		.req	x4
-data2w		.req	w4
-has_nul		.req	x5
-diff		.req	x6
-endloop		.req	x7
-tmp1		.req	x8
-tmp2		.req	x9
-tmp3		.req	x10
-pos		.req	x11
-limit_wd	.req	x12
-mask		.req	x13
+#define data1		x3
+#define data1w		w3
+#define data1h		x4
+#define data2		x5
+#define data2w		w5
+#define data2h		x6
+#define tmp1		x7
+#define tmp2		x8
 
 SYM_FUNC_START_WEAK_PI(memcmp)
-	cbz	limit, .Lret0
-	eor	tmp1, src1, src2
-	tst	tmp1, #7
-	b.ne	.Lmisaligned8
-	ands	tmp1, src1, #7
-	b.ne	.Lmutual_align
-	sub	limit_wd, limit, #1 /* limit != 0, so no underflow.  */
-	lsr	limit_wd, limit_wd, #3 /* Convert to Dwords.  */
-	/*
-	* The input source addresses are at alignment boundary.
-	* Directly compare eight bytes each time.
-	*/
-.Lloop_aligned:
-	ldr	data1, [src1], #8
-	ldr	data2, [src2], #8
-.Lstart_realigned:
-	subs	limit_wd, limit_wd, #1
-	eor	diff, data1, data2	/* Non-zero if differences found.  */
-	csinv	endloop, diff, xzr, cs	/* Last Dword or differences.  */
-	cbz	endloop, .Lloop_aligned
-
-	/* Not reached the limit, must have found a diff.  */
-	tbz	limit_wd, #63, .Lnot_limit
-
-	/* Limit % 8 == 0 => the diff is in the last 8 bytes. */
-	ands	limit, limit, #7
-	b.eq	.Lnot_limit
-	/*
-	* The remained bytes less than 8. It is needed to extract valid data
-	* from last eight bytes of the intended memory range.
-	*/
-	lsl	limit, limit, #3	/* bytes-> bits.  */
-	mov	mask, #~0
-CPU_BE( lsr	mask, mask, limit )
-CPU_LE( lsl	mask, mask, limit )
-	bic	data1, data1, mask
-	bic	data2, data2, mask
-
-	orr	diff, diff, mask
-	b	.Lnot_limit
-
-.Lmutual_align:
-	/*
-	* Sources are mutually aligned, but are not currently at an
-	* alignment boundary. Round down the addresses and then mask off
-	* the bytes that precede the start point.
-	*/
-	bic	src1, src1, #7
-	bic	src2, src2, #7
-	ldr	data1, [src1], #8
-	ldr	data2, [src2], #8
-	/*
-	* We can not add limit with alignment offset(tmp1) here. Since the
-	* addition probably make the limit overflown.
-	*/
-	sub	limit_wd, limit, #1/*limit != 0, so no underflow.*/
-	and	tmp3, limit_wd, #7
-	lsr	limit_wd, limit_wd, #3
-	add	tmp3, tmp3, tmp1
-	add	limit_wd, limit_wd, tmp3, lsr #3
-	add	limit, limit, tmp1/* Adjust the limit for the extra.  */
-
-	lsl	tmp1, tmp1, #3/* Bytes beyond alignment -> bits.*/
-	neg	tmp1, tmp1/* Bits to alignment -64.  */
-	mov	tmp2, #~0
-	/*mask off the non-intended bytes before the start address.*/
-CPU_BE( lsl	tmp2, tmp2, tmp1 )/*Big-endian.Early bytes are at MSB*/
-	/* Little-endian.  Early bytes are at LSB.  */
-CPU_LE( lsr	tmp2, tmp2, tmp1 )
-
-	orr	data1, data1, tmp2
-	orr	data2, data2, tmp2
-	b	.Lstart_realigned
-
-	/*src1 and src2 have different alignment offset.*/
-.Lmisaligned8:
-	cmp	limit, #8
-	b.lo	.Ltiny8proc /*limit < 8: compare byte by byte*/
-
-	and	tmp1, src1, #7
-	neg	tmp1, tmp1
-	add	tmp1, tmp1, #8/*valid length in the first 8 bytes of src1*/
-	and	tmp2, src2, #7
-	neg	tmp2, tmp2
-	add	tmp2, tmp2, #8/*valid length in the first 8 bytes of src2*/
-	subs	tmp3, tmp1, tmp2
-	csel	pos, tmp1, tmp2, hi /*Choose the maximum.*/
-
-	sub	limit, limit, pos
-	/*compare the proceeding bytes in the first 8 byte segment.*/
-.Ltinycmp:
-	ldrb	data1w, [src1], #1
-	ldrb	data2w, [src2], #1
-	subs	pos, pos, #1
-	ccmp	data1w, data2w, #0, ne  /* NZCV = 0b0000.  */
-	b.eq	.Ltinycmp
-	cbnz	pos, 1f /*diff occurred before the last byte.*/
-	cmp	data1w, data2w
-	b.eq	.Lstart_align
-1:
-	sub	result, data1, data2
-	ret
-
-.Lstart_align:
-	lsr	limit_wd, limit, #3
-	cbz	limit_wd, .Lremain8
-
-	ands	xzr, src1, #7
-	b.eq	.Lrecal_offset
-	/*process more leading bytes to make src1 aligned...*/
-	add	src1, src1, tmp3 /*backwards src1 to alignment boundary*/
-	add	src2, src2, tmp3
-	sub	limit, limit, tmp3
-	lsr	limit_wd, limit, #3
-	cbz	limit_wd, .Lremain8
-	/*load 8 bytes from aligned SRC1..*/
-	ldr	data1, [src1], #8
-	ldr	data2, [src2], #8
-
-	subs	limit_wd, limit_wd, #1
-	eor	diff, data1, data2  /*Non-zero if differences found.*/
-	csinv	endloop, diff, xzr, ne
-	cbnz	endloop, .Lunequal_proc
-	/*How far is the current SRC2 from the alignment boundary...*/
-	and	tmp3, tmp3, #7
-
-.Lrecal_offset:/*src1 is aligned now..*/
-	neg	pos, tmp3
-.Lloopcmp_proc:
-	/*
-	* Divide the eight bytes into two parts. First,backwards the src2
-	* to an alignment boundary,load eight bytes and compare from
-	* the SRC2 alignment boundary. If all 8 bytes are equal,then start
-	* the second part's comparison. Otherwise finish the comparison.
-	* This special handle can garantee all the accesses are in the
-	* thread/task space in avoid to overrange access.
-	*/
-	ldr	data1, [src1,pos]
-	ldr	data2, [src2,pos]
-	eor	diff, data1, data2  /* Non-zero if differences found.  */
-	cbnz	diff, .Lnot_limit
-
-	/*The second part process*/
-	ldr	data1, [src1], #8
-	ldr	data2, [src2], #8
-	eor	diff, data1, data2  /* Non-zero if differences found.  */
-	subs	limit_wd, limit_wd, #1
-	csinv	endloop, diff, xzr, ne/*if limit_wd is 0,will finish the cmp*/
-	cbz	endloop, .Lloopcmp_proc
-.Lunequal_proc:
-	cbz	diff, .Lremain8
-
-/* There is difference occurred in the latest comparison. */
-.Lnot_limit:
-/*
-* For little endian,reverse the low significant equal bits into MSB,then
-* following CLZ can find how many equal bits exist.
-*/
-CPU_LE( rev	diff, diff )
-CPU_LE( rev	data1, data1 )
-CPU_LE( rev	data2, data2 )
-
-	/*
-	* The MS-non-zero bit of DIFF marks either the first bit
-	* that is different, or the end of the significant data.
-	* Shifting left now will bring the critical information into the
-	* top bits.
-	*/
-	clz	pos, diff
-	lsl	data1, data1, pos
-	lsl	data2, data2, pos
-	/*
-	* We need to zero-extend (char is unsigned) the value and then
-	* perform a signed subtraction.
-	*/
-	lsr	data1, data1, #56
-	sub	result, data1, data2, lsr #56
+	subs	limit, limit, 8
+	b.lo	L(less8)
+
+	ldr	data1, [src1], 8
+	ldr	data2, [src2], 8
+	cmp	data1, data2
+	b.ne	L(return)
+
+	subs	limit, limit, 8
+	b.gt	L(more16)
+
+	ldr	data1, [src1, limit]
+	ldr	data2, [src2, limit]
+	b	L(return)
+
+L(more16):
+	ldr	data1, [src1], 8
+	ldr	data2, [src2], 8
+	cmp	data1, data2
+	bne	L(return)
+
+	/* Jump directly to comparing the last 16 bytes for 32 byte (or less)
+	   strings.  */
+	subs	limit, limit, 16
+	b.ls	L(last_bytes)
+
+	/* We overlap loads between 0-32 bytes at either side of SRC1 when we
+	   try to align, so limit it only to strings larger than 128 bytes.  */
+	cmp	limit, 96
+	b.ls	L(loop16)
+
+	/* Align src1 and adjust src2 with bytes not yet done.  */
+	and	tmp1, src1, 15
+	add	limit, limit, tmp1
+	sub	src1, src1, tmp1
+	sub	src2, src2, tmp1
+
+	/* Loop performing 16 bytes per iteration using aligned src1.
+	   Limit is pre-decremented by 16 and must be larger than zero.
+	   Exit if <= 16 bytes left to do or if the data is not equal.  */
+	.p2align 4
+L(loop16):
+	ldp	data1, data1h, [src1], 16
+	ldp	data2, data2h, [src2], 16
+	subs	limit, limit, 16
+	ccmp	data1, data2, 0, hi
+	ccmp	data1h, data2h, 0, eq
+	b.eq	L(loop16)
+
+	cmp	data1, data2
+	bne	L(return)
+	mov	data1, data1h
+	mov	data2, data2h
+	cmp	data1, data2
+	bne	L(return)
+
+	/* Compare last 1-16 bytes using unaligned access.  */
+L(last_bytes):
+	add	src1, src1, limit
+	add	src2, src2, limit
+	ldp	data1, data1h, [src1]
+	ldp	data2, data2h, [src2]
+	cmp	data1, data2
+	bne	L(return)
+	mov	data1, data1h
+	mov	data2, data2h
+	cmp	data1, data2
+
+	/* Compare data bytes and set return value to 0, -1 or 1.  */
+L(return):
+#ifndef __AARCH64EB__
+	rev	data1, data1
+	rev	data2, data2
+#endif
+	cmp	data1, data2
+L(ret_eq):
+	cset	result, ne
+	cneg	result, result, lo
 	ret
 
-.Lremain8:
-	/* Limit % 8 == 0 =>. all data are equal.*/
-	ands	limit, limit, #7
-	b.eq	.Lret0
-
-.Ltiny8proc:
-	ldrb	data1w, [src1], #1
-	ldrb	data2w, [src2], #1
-	subs	limit, limit, #1
-
-	ccmp	data1w, data2w, #0, ne  /* NZCV = 0b0000. */
-	b.eq	.Ltiny8proc
-	sub	result, data1, data2
-	ret
-.Lret0:
-	mov	result, #0
+	.p2align 4
+	/* Compare up to 8 bytes.  Limit is [-8..-1].  */
+L(less8):
+	adds	limit, limit, 4
+	b.lo	L(less4)
+	ldr	data1w, [src1], 4
+	ldr	data2w, [src2], 4
+	cmp	data1w, data2w
+	b.ne	L(return)
+	sub	limit, limit, 4
+L(less4):
+	adds	limit, limit, 4
+	beq	L(ret_eq)
+L(byte_loop):
+	ldrb	data1w, [src1], 1
+	ldrb	data2w, [src2], 1
+	subs	limit, limit, 1
+	ccmp	data1w, data2w, 0, ne	/* NZCV = 0b0000.  */
+	b.eq	L(byte_loop)
+	sub	result, data1w, data2w
 	ret
 SYM_FUNC_END_PI(memcmp)
 EXPORT_SYMBOL_NOKASAN(memcmp)
-- 
2.17.1




More information about the linux-arm-kernel mailing list