[PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
dillon.minfei at gmail.com
Tue Jun 30 11:32:15 EDT 2020
Hi Andy, Noralf,
gentle ping for this patch set,
do we have any new structure, or idea to support both dpi and dbi
interface by one drm panel driver?
from this thread
, it's seems
discussing was stopped at may 25.
if there are any new information about this topic, please feel free to
let me know. hope i can make some
progress on it.
On Tue, May 26, 2020 at 6:38 PM Noralf Trønnes <noralf at tronnes.org> wrote:
> Den 26.05.2020 11.08, skrev dillon min:
> > Hi Andy,
> > Thanks for input.
> > On Tue, May 26, 2020 at 3:46 PM Andy Shevchenko
> > <andy.shevchenko at gmail.com> wrote:
> >> On Mon, May 25, 2020 at 6:46 AM <dillon.minfei at gmail.com> wrote:
> >>> From: dillon min <dillon.minfei at gmail.com>
> >>> This driver combine tiny/ili9341.c mipi_dbi_interface driver
> >>> with mipi_dpi_interface driver, can support ili9341 with serial
> >>> mode or parallel rgb interface mode by register configuration.
> >> Noralf told once that this driver should be unified with mi0283qt.c.
> >> So, what should we do here?
> >> --
> >> With Best Regards,
> >> Andy Shevchenko
> > from sam's suggestion, we can't setup two drivers to support one panel
> > in the tree. so, i copy the mipi dbi part from tiny/ili9341.c. to this driver
> > from register settings and dts binding is keep the same to tiny/ili9341.c.
> > so, in my opinion if tiny/ili9341.c is unified with mi0283qt.c, this
> > driver should be
> > too.
> There's a discussion about MIPI DBI panels here:
> MIPI DSI, DBI, and tinydrm drivers
> > thanks.
> > best regards,
> > Dillon,
More information about the linux-arm-kernel