[PATCH 53/73] arm64: tegra: Remove simple regulators bus

[Jon Hunter]

On 30/06/2020 12:11, Jon Hunter wrote:
> 
> On 16/06/2020 14:52, Thierry Reding wrote:
>> From: Thierry Reding <treding at nvidia.com>
>>
>> The standard way to do this is to list out the regulators at the top-
>> level. Adopt the standard way to fix validation.
>>
>> Signed-off-by: Thierry Reding <treding at nvidia.com>
>> ---
>>  .../arm64/boot/dts/nvidia/tegra132-norrin.dts | 247 ++++++------
>>  .../boot/dts/nvidia/tegra186-p2771-0000.dts   |  81 ++--
>>  .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi |  60 ++-
>>  .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  96 ++---
>>  .../arm64/boot/dts/nvidia/tegra210-p2180.dtsi |  23 +-
>>  .../arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 274 +++++++------
>>  .../arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 361 ++++++++----------
>>  .../boot/dts/nvidia/tegra210-p3450-0000.dts   | 177 ++++-----
>>  arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 137 +++----
>>  9 files changed, 671 insertions(+), 785 deletions(-)
> 
> 
> After this patch is applied I see the following build breakage ...
> 
>   DTC     arch/arm64/boot/dts/nvidia/tegra210-p2894-0050-a08.dtb
> arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi:1646.23-1656.4: ERROR
> (phandle_references): /regulator at 1: Reference to non-existent node or
> label "pmic"
> 
> arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi:1658.30-1670.4: ERROR
> (phandle_references): /regulator at 2: Reference to non-existent node or
> label "pmic"
> 
> arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi:1705.29-1715.4: ERROR
> (phandle_references): /regulator at 6: Reference to non-existent node or
> label "pmic"


Actually it might not be this patch. However, I noticed that builds were
getting skipped when bisecting other issues. So we may need to ensure
all of these build OK.

Jon

-- 
nvpublic