[PATCH v4 0/9] drm/vc4: Turn the TXP into a CRTC

[Maxime Ripard]

Hi Eric,

On Thu, Jun 11, 2020 at 03:36:45PM +0200, Maxime Ripard wrote:
> Hi,
> 
> This is another part of the rpi4 HDMI series that got promoted to a
> series of its own to try to reduce the main one.
> 
> This rework is needed since the bcm2711 used in the rpi4 has a more
> complex routing in the HVS that doesn't allow to use a fairly simple
> mapping like what was used before.
> 
> Since that mapping affects both the pixelvalves and the TXP, turning the
> TXP into a CRTC just like pixelvalves are allows to deal with the
> mapping in the CRTC states, which turns out to be pretty convenient.
> 
> Let me know what you think,
> Maxime
> 
> Changes from v3:
>   - Stripped the patches out of the main HDMI series
>   - Change the bind order of the HVS to avoid a compatible check
>   - Added Eric's tags
>   - Rebased on top of drm-misc-next
> 
> Maxime Ripard (9):
>   drm/vc4: Reorder the bind order of the devices
>   drm/vc4: crtc: Move HVS setup code to the HVS driver

Could you review those two patches? You haven't reviewed them yet and
it's holding back the rest of the patches.

Thanks!
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20200630/4d0c2fc6/attachment-0001.sig>