[PATCH 0/7] Add initial Keem Bay SoC / Board support

[Daniele Alessandrelli]

On Tue, 2020-06-16 at 16:56 +0100, Daniele Alessandrelli wrote:
> Hi,
> 
> This patch-set adds initial support for a new Intel Movidius SoC
> code-named
> Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel
> Movidius VPU.
> 
> This initial patch-set enables only the minimal set of components
> required to
> make the Keem Bay EVM board boot into initramfs.
> 
> Brief summary of the patch-set:
> * Patches 1-2 add the Keem Bay SCMI Mailbox driver (needed to enable
> SCMI in
>   Keem Bay)
> * Patch 3 adds the ARCH_KEEMBAY config option
> * Patches 4-7 add minimal device tree for Keem Bay SoC and Keem Bay
> EVM
>   (together with information about the SoC maintainers)
> 
> Regards,
> Daniele
> 
> 
> Daniele Alessandrelli (5):
>   arm64: Add config for Keem Bay SoC
>   dt-bindings: arm: Add Keem Bay bindings
>   MAINTAINERS: Add maintainers for Keem Bay SoC
>   arm64: dts: keembay: Add device tree for Keem Bay SoC
>   arm64: dts: keembay: Add device tree for Keem Bay EVM board
> 
> Paul Murphy (2):
>   dt-bindings: mailbox: Add Keem Bay SCMI mailbox bindings
>   mailbox: keembay-scmi-mailbox: Add support for Keem Bay mailbox
> 
>  .../devicetree/bindings/arm/keembay.yaml      |  19 ++
>  .../mailbox/intel,keembay-scmi-mailbox.yaml   |  44 ++++
>  MAINTAINERS                                   |  16 ++
>  arch/arm64/Kconfig.platforms                  |   5 +
>  arch/arm64/boot/dts/intel/Makefile            |   1 +
>  arch/arm64/boot/dts/intel/keembay-evm.dts     |  55 +++++
>  arch/arm64/boot/dts/intel/keembay-soc.dtsi    | 172 +++++++++++++++
>  drivers/mailbox/Kconfig                       |   9 +
>  drivers/mailbox/Makefile                      |   2 +
>  drivers/mailbox/keembay-scmi-mailbox.c        | 203
> ++++++++++++++++++
>  include/dt-bindings/clock/keembay-clocks.h    | 188 ++++++++++++++++
>  include/dt-bindings/power/keembay-power.h     |  19 ++
>  12 files changed, 733 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/arm/keembay.yaml
>  create mode 100644
> Documentation/devicetree/bindings/mailbox/intel,keembay-scmi-
> mailbox.yaml
>  create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
>  create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
>  create mode 100644 drivers/mailbox/keembay-scmi-mailbox.c
>  create mode 100644 include/dt-bindings/clock/keembay-clocks.h
>  create mode 100644 include/dt-bindings/power/keembay-power.h
> 

Ping