[PATCH] gpio: omap: Add missing PM ops for suspend
Tony Lindgren
tony at atomide.com
Mon Jun 29 12:41:14 EDT 2020
We've had the legacy platform code take care of suspend for us but
this no longer is the case when probed without legacy mode with
ti-sysc. We need to configure PM ops like standard Linux device
drivers do.
As we still have some SoCs booting also the legacy mode, we need to
add omap_gpio_suspend() and omap_gpio_resume(), and check for the
is_suspended flag to avoid legacy _od_suspend_noirq() calling them
on an already suspended GPIO instance.
Once we have no SoCs booting in legacy mode, we can just switch to
using the standard PM ops with pm_runtime_force_suspend() and
pm_runtime_force_resume().
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
drivers/gpio/gpio-omap.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -60,6 +60,7 @@ struct gpio_bank {
struct clk *dbck;
struct notifier_block nb;
unsigned int is_suspended:1;
+ unsigned int needs_resume:1;
u32 mod_usage;
u32 irq_usage;
u32 dbck_enable_mask;
@@ -1504,9 +1505,34 @@ static int __maybe_unused omap_gpio_runtime_resume(struct device *dev)
return 0;
}
+static int omap_gpio_suspend(struct device *dev)
+{
+ struct gpio_bank *bank = dev_get_drvdata(dev);
+
+ if (bank->is_suspended)
+ return 0;
+
+ bank->needs_resume = 1;
+
+ return omap_gpio_runtime_suspend(dev);
+}
+
+static int omap_gpio_resume(struct device *dev)
+{
+ struct gpio_bank *bank = dev_get_drvdata(dev);
+
+ if (!bank->needs_resume)
+ return 0;
+
+ bank->needs_resume = 0;
+
+ return omap_gpio_runtime_resume(dev);
+}
+
static const struct dev_pm_ops gpio_pm_ops = {
SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
NULL)
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume)
};
static struct platform_driver omap_gpio_driver = {
--
2.27.0
More information about the linux-arm-kernel
mailing list