[PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin
Maxime Ripard
maxime at cerno.tech
Mon Jun 29 10:21:45 EDT 2020
Hi!
On Fri, Jun 05, 2020 at 04:44:51PM +0800, Jian-Hong Pan wrote:
> Maxime Ripard <maxime at cerno.tech> 於 2020年6月2日 週二 下午7:04寫道：
> >
> > Hi,
> >
> > On Mon, Jun 01, 2020 at 03:58:26PM +0800, Jian-Hong Pan wrote:
> > > Maxime Ripard <maxime at cerno.tech> 於 2020年5月28日 週四 下午3:30寫道：
> > > >
> > > > Hi Daniel,
> > > >
> > > > On Wed, May 27, 2020 at 05:15:12PM +0800, Daniel Drake wrote:
> > > > > On Wed, May 27, 2020 at 5:13 PM Maxime Ripard <maxime at cerno.tech> wrote:
> > > > > > I'm about to send a v3 today or tomorrow, I can Cc you (and Jian-Hong) if you
> > > > > > want.
> > > > >
> > > > > That would be great, although given the potentially inconsistent
> > > > > results we've been seeing so far it would be great if you could
> > > > > additionally push a git branch somewhere.
> > > > > That way we can have higher confidence that we are applying exactly
> > > > > the same patches to the same base etc.
> > > >
> > > > So I sent a new iteration yesterday, and of course forgot to cc you... Sorry for
> > > > that.
> > > >
> > > > I've pushed my current branch here:
> > > > https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git/log/?h=rpi4-kms
> > >
> > > Thanks to Maxime!
> > >
> > > I have tried your repository on branch rpi4-kms. The DRM VC4 is used!
> > > But got some issues:
> > > 1. Some weird error message in dmesg. Not sure it is related, or not
> > > [ 5.219321] [drm:vc5_hdmi_init_resources] *ERROR* Failed to get
> > > HDMI state machine clock
> > > https://gist.github.com/starnight/3f317dca121065a361cf08e91225e389
> >
> > That's a deferred probing. The first time the HDMI driver is being
> > probed, the firmware clock driver has not been probed yet. It's making
> > another attempt later on, which succeeds.
> >
> > > 2. The screen flashes suddenly sometimes.
>
> I append drm.debug=0x3 to boot command. Whenever, the screen flashes,
> I notice the logs like this:
>
> Jun 01 15:22:40 endless kernel: [drm:drm_calc_timestamping_constants]
> crtc 64: hwmode: htotal 2200, vtotal 1125, vdisplay 1080
> Jun 01 15:22:40 endless kernel: [drm:drm_calc_timestamping_constants]
> crtc 64: clock 148500 kHz framedur 16666666 linedur 14814
> Jun 01 15:22:40 endless kernel: [drm:drm_vblank_enable] enabling
> vblank on crtc 3, ret: 0
> Jun 01 15:22:40 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 159 (2)
> Jun 01 15:22:40 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 154 (1)
> Jun 01 15:22:40 endless kernel: [drm:vblank_disable_fn] disabling
> vblank on crtc 3
> Jun 01 15:22:42 endless kernel: [drm:drm_ioctl] pid=584, dev=0xe200,
> auth=1, DRM_IOCTL_MODE_CURSOR
> Jun 01 15:22:42 endless kernel: [drm:drm_ioctl] pid=584, dev=0xe200,
> auth=1, DRM_IOCTL_MODE_CURSOR2
> Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_get] OBJ ID: 159 (1)
> Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_get] OBJ ID: 154 (1)
> Jun 01 15:22:42 endless kernel: [drm:drm_calc_timestamping_constants]
> crtc 64: hwmode: htotal 2200, vtotal 1125, vdisplay 1080
> Jun 01 15:22:42 endless kernel: [drm:drm_calc_timestamping_constants]
> crtc 64: clock 148500 kHz framedur 16666666 linedur 14814
> Jun 01 15:22:42 endless kernel: [drm:drm_vblank_enable] enabling
> vblank on crtc 3, ret: 0
> Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 159 (2)
> Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 154 (2)
>
> Here is the full log
> https://gist.github.com/starnight/85d641819839eddc7a55ca7173990a56
>
> > > 3. The higher resolutions, like 1920x1080 ... are lost after hot
> > > re-plug HDMI cable (HDMI0)
>
> I should explain this in more detail. Here are the steps to reproduce
> this issue:
> 1. Before unplug the HDMI cable from HDMI0 port.
> $ xrandr
> Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 2048 x 2048
> HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x
> axis y axis) 521mm x 293mm
> 1920x1080 60.00*+ 50.00 59.94
> 1920x1080i 60.00 50.00 59.94
> 1680x1050 59.88
> 1280x1024 75.02 60.02
> 1440x900 59.90
> 1280x960 60.00
> 1152x864 75.00
> 1280x720 60.00 50.00 59.94
> 1440x576 50.00
> 1024x768 75.03 70.07 60.00
> 1440x480 60.00 59.94
> 832x624 74.55
> 800x600 72.19 75.00 60.32 56.25
> 720x576 50.00
> 720x480 60.00 59.94
> 640x480 75.00 72.81 66.67 60.00 59.94
> 720x400 70.08
> HDMI-2 disconnected (normal left inverted right x axis y axis)
>
> 2. Unplug the HDMI cable from HDMI0 port.
> 3. Plug the HDMI cable to **HDMI1** port.
> $ xrandr
> Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 2048 x 2048
> HDMI-1 disconnected (normal left inverted right x axis y axis)
> HDMI-2 connected primary 1920x1080+0+0 (normal left inverted right x
> axis y axis) 521mm x 293mm
> 1920x1080 60.00*+ 50.00 59.94
> 1920x1080i 60.00 50.00 59.94
> 1680x1050 59.88
> 1280x1024 75.02 60.02
> 1440x900 59.90
> 1280x960 60.00
> 1152x864 75.00
> 1280x720 60.00 50.00 59.94
> 1440x576 50.00
> 1024x768 75.03 70.07 60.00
> 1440x480 60.00 59.94
> 832x624 74.55
> 800x600 72.19 75.00 60.32 56.25
> 720x576 50.00
> 720x480 60.00 59.94
> 640x480 75.00 72.81 66.67 60.00 59.94
> 720x400 70.08
>
> 4. Unplug the HDMI cable from **HDMI1** port.
> 5. Plug the HDMI cable back to HDMI0 port.
> $ xrandr
> Screen 0: minimum 320 x 200, current 1368 x 768, maximum 2048 x 2048
> HDMI-1 connected primary 1368x768+0+0 (normal left inverted right x
> axis y axis) 0mm x 0mm
> 1368x768 59.88*
> 1360x768 59.80
> 1280x800 59.81
> 1152x864 60.00
> 1280x720 59.86
> 1024x768 60.00
> 1024x576 59.90
> 960x540 59.63
> 800x600 60.32
> 800x450 59.82
> 700x450 59.88
> 640x480 59.94
> 684x384 59.88 59.85
> 680x384 59.80 59.96
> 640x400 59.88 59.98
> 576x432 60.06
> 640x360 59.86 59.83
> 512x384 60.00
> 512x288 60.00 59.92
> 480x270 59.63 59.82
> 400x300 60.32
> 320x240 60.05
> HDMI-2 disconnected (normal left inverted right x axis y axis)
Sorry for getting back at it so late. I just tested with modetest only
and my current branch and it seems to behave properly. Did you had to
run X to get that issue, or is it just how you noticed it?
Also, was that with the branch based on 5.7 I pushed on my git tree on
kernel.org or some earlier revision of the series?
Thanks!
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20200629/966d1e83/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list