[PATCH v5 2/6] PCI: uniphier: Add misc interrupt handler to invoke PME and AER

[Marc Zyngier]

On Thu, 18 Jun 2020 09:38:09 +0100,
Kunihiko Hayashi <hayashi.kunihiko at socionext.com> wrote:
> 
> The misc interrupts consisting of PME, AER, and Link event, is handled
> by INTx handler, however, these interrupts should be also handled by
> MSI handler.
> 
> This adds the function uniphier_pcie_misc_isr() that handles misc
> interrupts, which is called from both INTx and MSI handlers.
> This function detects PME and AER interrupts with the status register,
> and invoke PME and AER drivers related to MSI.
> 
> And this sets the mask for misc interrupts from INTx if MSI is enabled
> and sets the mask for misc interrupts from MSI if MSI is disabled.
> 
> Cc: Marc Zyngier <maz at kernel.org>
> Cc: Jingoo Han <jingoohan1 at gmail.com>
> Cc: Gustavo Pimentel <gustavo.pimentel at synopsys.com>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
> ---
>  drivers/pci/controller/dwc/pcie-uniphier.c | 57 ++++++++++++++++++++++++------
>  1 file changed, 46 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
> index a5401a0..5ce2479 100644
> --- a/drivers/pci/controller/dwc/pcie-uniphier.c
> +++ b/drivers/pci/controller/dwc/pcie-uniphier.c
> @@ -44,7 +44,9 @@
>  #define PCL_SYS_AUX_PWR_DET		BIT(8)
>  
>  #define PCL_RCV_INT			0x8108
> +#define PCL_RCV_INT_ALL_INT_MASK	GENMASK(28, 25)
>  #define PCL_RCV_INT_ALL_ENABLE		GENMASK(20, 17)
> +#define PCL_RCV_INT_ALL_MSI_MASK	GENMASK(12, 9)
>  #define PCL_CFG_BW_MGT_STATUS		BIT(4)
>  #define PCL_CFG_LINK_AUTO_BW_STATUS	BIT(3)
>  #define PCL_CFG_AER_RC_ERR_MSI_STATUS	BIT(2)
> @@ -167,7 +169,15 @@ static void uniphier_pcie_stop_link(struct dw_pcie *pci)
>  
>  static void uniphier_pcie_irq_enable(struct uniphier_pcie_priv *priv)
>  {
> -	writel(PCL_RCV_INT_ALL_ENABLE, priv->base + PCL_RCV_INT);
> +	u32 val;
> +
> +	val = PCL_RCV_INT_ALL_ENABLE;
> +	if (pci_msi_enabled())
> +		val |= PCL_RCV_INT_ALL_INT_MASK;
> +	else
> +		val |= PCL_RCV_INT_ALL_MSI_MASK;

Does this affect endpoints? Or just the RC itself?

> +
> +	writel(val, priv->base + PCL_RCV_INT);
>  	writel(PCL_RCV_INTX_ALL_ENABLE, priv->base + PCL_RCV_INTX);
>  }
>  
> @@ -231,32 +241,56 @@ static const struct irq_domain_ops uniphier_intx_domain_ops = {
>  	.map = uniphier_pcie_intx_map,
>  };
>  
> -static void uniphier_pcie_irq_handler(struct irq_desc *desc)
> +static void uniphier_pcie_misc_isr(struct pcie_port *pp, bool is_msi)
>  {
> -	struct pcie_port *pp = irq_desc_get_handler_data(desc);
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>  	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
> -	struct irq_chip *chip = irq_desc_get_chip(desc);
> -	unsigned long reg;
> -	u32 val, bit, virq;
> +	u32 val, virq;
>  
> -	/* INT for debug */
>  	val = readl(priv->base + PCL_RCV_INT);
>  
>  	if (val & PCL_CFG_BW_MGT_STATUS)
>  		dev_dbg(pci->dev, "Link Bandwidth Management Event\n");
> +
>  	if (val & PCL_CFG_LINK_AUTO_BW_STATUS)
>  		dev_dbg(pci->dev, "Link Autonomous Bandwidth Event\n");
> -	if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
> -		dev_dbg(pci->dev, "Root Error\n");
> -	if (val & PCL_CFG_PME_MSI_STATUS)
> -		dev_dbg(pci->dev, "PME Interrupt\n");
> +
> +	if (is_msi) {
> +		if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
> +			dev_dbg(pci->dev, "Root Error Status\n");
> +
> +		if (val & PCL_CFG_PME_MSI_STATUS)
> +			dev_dbg(pci->dev, "PME Interrupt\n");
> +
> +		if (val & (PCL_CFG_AER_RC_ERR_MSI_STATUS |
> +			   PCL_CFG_PME_MSI_STATUS)) {
> +			virq = irq_linear_revmap(pp->irq_domain, 0);
> +			generic_handle_irq(virq);
> +		}
> +	}

Please have two handlers: one for interrupts that are from the RC,
another for interrupts coming from the endpoints.

	M.

-- 
Without deviation from the norm, progress is not possible.