[PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC
Cristian Ciocaltea
cristian.ciocaltea at gmail.com
Fri Jun 26 09:06:41 EDT 2020
On Fri, Jun 26, 2020 at 12:50:46PM +0530, Manivannan Sadhasivam wrote:
>
>
> On 26 June 2020 1:46:18 AM IST, Cristian Ciocaltea <cristian.ciocaltea at gmail.com> wrote:
> >Add pinctrl and gpio bindings for Actions Semi S500 SoC.
> >
> >Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at gmail.com>
> >---
> > .../pinctrl/actions,s500-pinctrl.yaml | 228 ++++++++++++++++++
> > 1 file changed, 228 insertions(+)
> >create mode 100644
> >Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >
> >diff --git
> >a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >new file mode 100644
> >index 000000000000..856947c70844
> >--- /dev/null
> >+++
> >b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >@@ -0,0 +1,228 @@
> >+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >+%YAML 1.2
> >+---
> >+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
> >+$schema: http://devicetree.org/meta-schemas/core.yaml#
> >+
> >+title: Actions Semi S500 SoC pinmux & GPIO controller
> >+
> >+maintainers:
> >+ - Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>
> Feel free to add yourself as co-maintainer since you are the one contributing S500 support.
Ok, thanks!
>
> >+
> >+description: |
> >+ Pinmux & GPIO controller manages pin multiplexing & configuration
> >including
> >+ GPIO function selection & GPIO attributes configuration. Please
> >refer to
> >+ pinctrl-bindings.txt in this directory for common binding part and
> >usage.
> >+
> >+properties:
> >+ compatible:
> >+ const: actions,s500-pinctrl
> >+
> >+ reg:
> >+ minItems: 1
> >+ maxItems: 4
>
> 4?
>
> Thanks,
> Mani
The pinctrl node in the owl-s500 DTS has a more granular specification
for the reg property, in order to exclude the unused ranges (i.e. PWM):
reg = <0xb01b0000 0x40>, /* GPIO */
<0xb01b0040 0x10>, <0xb01b0060 0x18>, <0xb01b0080 0xc>;
The complete node description is available in the related patch:
https://lore.kernel.org/lkml/b43c9d1a1ef689403bc17b2474aff20629b58263.1593124368.git.cristian.ciocaltea@gmail.com/
For the sake of simplicity, in the example below I used the contiguous
range. However, I've just noticed a copy/paste issue there, the correct
range should be <0xb01b0000 0x8c> - will be fixed in the next revision.
Thanks for reviewing,
Cristi
>
> >+
> >+ clocks:
> >+ maxItems: 1
> >+
> >+ gpio-controller: true
> >+
> >+ gpio-ranges:
> >+ maxItems: 1
> >+
> >+ '#gpio-cells':
> >+ description:
> >+ Specifies the pin number and flags, as defined in
> >+ include/dt-bindings/gpio/gpio.h
> >+ const: 2
> >+
> >+ interrupt-controller: true
> >+
> >+ '#interrupt-cells':
> >+ description:
> >+ Specifies the pin number and flags, as defined in
> >+ include/dt-bindings/interrupt-controller/irq.h
> >+ const: 2
> >+
> >+ interrupts:
> >+ description:
> >+ One interrupt per each of the 5 GPIO ports supported by the
> >controller,
> >+ sorted by port number ascending order.
> >+ minItems: 5
> >+ maxItems: 5
> >+
> >+patternProperties:
> >+ '^.*$':
> >+ if:
> >+ type: object
> >+ then:
> >+ patternProperties:
> >+ 'pinmux$':
> >+ type: object
> >+ description:
> >+ Pinctrl node's client devices specify pin muxes using
> >subnodes,
> >+ which in turn use the standard properties below.
> >+ $ref: pinmux-node.yaml#
> >+
> >+ properties:
> >+ groups:
> >+ description:
> >+ List of gpio pin groups affected by the functions
> >specified in
> >+ this subnode.
> >+ items:
> >+ oneOf:
> >+ - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp,
> >rmii_txd0_mfp,
> >+ rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp,
> >+ rmii_rxd1_mfp, rmii_rxd0_mfp, rmii_ref_clk_mfp,
> >+ i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp,
> >i2s1_pcm0_mfp,
> >+ i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp,
> >+ ks_in3_mfp, ks_out0_mfp, ks_out1_mfp,
> >ks_out2_mfp,
> >+ lvds_o_pn_mfp, dsi_dn0_mfp, dsi_dp2_mfp,
> >lcd0_d17_mfp,
> >+ dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp,
> >lvds_ee_pn_mfp,
> >+ spi0_i2c_pcm_mfp, spi0_i2s_pcm_mfp,
> >dsi_dnp1_cp_mfp,
> >+ lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
> >+ uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp,
> >+ sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
> >sd1_d0_d3_mfp,
> >+ sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
> >uart0_rx_mfp,
> >+ clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
> >+ uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp,
> >sen0_pclk_mfp,
> >+ pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp,
> >pcm1_out_mfp,
> >+ dnand_data_wr_mfp, dnand_acle_ce0_mfp,
> >nand_ceb2_mfp,
> >+ nand_ceb3_mfp]
> >+ minItems: 1
> >+ maxItems: 32
> >+
> >+ function:
> >+ description:
> >+ Specify the alternative function to be configured for
> >the
> >+ given gpio pin groups.
> >+ enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3,
> >sens0,
> >+ sens1, uart0, uart1, uart2, uart3, uart4, uart5,
> >uart6, i2s0,
> >+ i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3,
> >pwm4, pwm5,
> >+ p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30,
> >clko_25m,
> >+ mipi_csi, nand, spdif, ts, lcd0]
> >+
> >+ required:
> >+ - groups
> >+ - function
> >+
> >+ additionalProperties: false
> >+
> >+ 'pinconf$':
> >+ type: object
> >+ description:
> >+ Pinctrl node's client devices specify pin configurations
> >using
> >+ subnodes, which in turn use the standard properties below.
> >+ $ref: pincfg-node.yaml#
> >+
> >+ properties:
> >+ groups:
> >+ description:
> >+ List of gpio pin groups affected by the drive-strength
> >property
> >+ specified in this subnode.
> >+ items:
> >+ oneOf:
> >+ - enum: [sirq_drv, rmii_txd01_txen_drv,
> >rmii_rxer_drv,
> >+ rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
> >+ smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv,
> >i2s3_drv,
> >+ i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv,
> >lvds_all_drv,
> >+ lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv,
> >sd1_d0_d3_drv,
> >+ sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv,
> >sd1_clk_drv,
> >+ spi0_all_drv, uart0_rx_drv, uart0_tx_drv,
> >uart2_all_drv,
> >+ i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
> >+ sens0_ckout_drv, uart3_all_drv]
> >+ minItems: 1
> >+ maxItems: 32
> >+
> >+ pins:
> >+ description:
> >+ List of gpio pins affected by the bias-pull-* and
> >+ input-schmitt-* properties specified in this subnode.
> >+ items:
> >+ oneOf:
> >+ - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1,
> >eth_txen,
> >+ eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0,
> >eth_ref_clk,
> >+ eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0,
> >i2s_bclk0,
> >+ i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1,
> >i2s_lrclk1,
> >+ i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3,
> >ks_out0,
> >+ ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp,
> >lvds_odn,
> >+ lvds_ocp, lvds_ocn, lvds_obp, lvds_obn,
> >lvds_oap,
> >+ lvds_oan, lvds_eep, lvds_een, lvds_edp,
> >lvds_edn,
> >+ lvds_ecp, lvds_ecn, lvds_ebp, lvds_ebn,
> >lvds_eap,
> >+ lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, dsi_dn3,
> >dsi_dp1,
> >+ dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
> >dsi_dp2,
> >+ dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
> >sd1_d1,
> >+ sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd,
> >sd1_clk,
> >+ spi0_sclk, spi0_ss, spi0_miso, spi0_mosi,
> >uart0_rx,
> >+ uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
> >+ sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0,
> >+ dnand_ceb1, dnand_ceb2, dnand_ceb3, uart2_rx,
> >uart2_tx,
> >+ uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx,
> >uart3_rtsb,
> >+ uart3_ctsb, pcm1_in, pcm1_clk, pcm1_sync,
> >pcm1_out,
> >+ i2c1_sclk, i2c1_sdata, i2c2_sclk, i2c2_sdata,
> >csi_dn0,
> >+ csi_dp0, csi_dn1, csi_dp1, csi_dn2, csi_dp2,
> >csi_dn3,
> >+ csi_dp3, csi_cn, csi_cp, dnand_d0, dnand_d1,
> >dnand_d2,
> >+ dnand_d3, dnand_d4, dnand_d5, dnand_d6,
> >dnand_d7,
> >+ dnand_rb, dnand_rdb, dnand_rdbn, dnand_wrb,
> >porb,
> >+ clko_25m, bsel, pkg0, pkg1, pkg2, pkg3]
> >+ minItems: 1
> >+ maxItems: 64
> >+
> >+ bias-pull-up: true
> >+ bias-pull-down: true
> >+
> >+ drive-strength:
> >+ description:
> >+ Selects the drive strength for the specified pins, in
> >mA.
> >+ enum: [2, 4, 8, 12]
> >+
> >+ input-schmitt-enable: true
> >+ input-schmitt-disable: true
> >+
> >+ additionalProperties: false
> >+
> >+required:
> >+ - compatible
> >+ - reg
> >+ - clocks
> >+ - gpio-controller
> >+ - gpio-ranges
> >+ - '#gpio-cells'
> >+ - interrupt-controller
> >+ - '#interrupt-cells'
> >+ - interrupts
> >+
> >+additionalProperties: false
> >+
> >+examples:
> >+ - |
> >+ #include <dt-bindings/interrupt-controller/arm-gic.h>
> >+ pinctrl: pinctrl at b01b0000 {
> >+ compatible = "actions,s500-pinctrl";
> >+ reg = <0xe01b0000 0x1000>;
> >+ clocks = <&cmu 20>;
> >+ gpio-controller;
> >+ gpio-ranges = <&pinctrl 0 0 132>;
> >+ #gpio-cells = <2>;
> >+ interrupt-controller;
> >+ #interrupt-cells = <2>;
> >+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> >+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> >+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> >+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> >+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> >+
> >+ i2c0_default: i2c0_default {
> >+ pinmux {
> >+ groups = "i2c0_mfp";
> >+ function = "i2c0";
> >+ };
> >+
> >+ pinconf {
> >+ pins = "i2c0_sclk", "i2c0_sdata";
> >+ bias-pull-up;
> >+ };
> >+ };
> >+ };
> >+
> >+...
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
More information about the linux-arm-kernel
mailing list