[PATCH v2 4/6] dt-bindings: reset: Add binding constants for Actions S500 RMU

[Philipp Zabel]

On Wed, 2020-06-24 at 20:47 +0300, Cristian Ciocaltea wrote:
> Add device tree binding constants for Actions Semi S500 SoC Reset
> Management Unit (RMU).
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at gmail.com>

Acked-by: Philipp Zabel <p.zabel at pengutronix.de>

to be merged through the clock tree, required by the following patch:
"clk: actions: Add Actions S500 SoC Reset Management Unit support".

regards
Philipp

> ---
>  .../dt-bindings/reset/actions,s500-reset.h    | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
> 
> diff --git a/include/dt-bindings/reset/actions,s500-reset.h b/include/dt-bindings/reset/actions,s500-reset.h
> new file mode 100644
> index 000000000000..f5d94176d10b
> --- /dev/null
> +++ b/include/dt-bindings/reset/actions,s500-reset.h
> @@ -0,0 +1,67 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Device Tree binding constants for Actions Semi S500 Reset Management Unit
> + *
> + * Copyright (c) 2014 Actions Semi Inc.
> + * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea at gmail.com>
> + */
> +
> +#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H
> +#define __DT_BINDINGS_ACTIONS_S500_RESET_H
> +
> +#define RESET_DMAC				0
> +#define RESET_NORIF				1
> +#define RESET_DDR				2
> +#define RESET_NANDC				3
> +#define RESET_SD0				4
> +#define RESET_SD1				5
> +#define RESET_PCM1				6
> +#define RESET_DE				7
> +#define RESET_LCD				8
> +#define RESET_SD2				9
> +#define RESET_DSI				10
> +#define RESET_CSI				11
> +#define RESET_BISP				12
> +#define RESET_KEY				13
> +#define RESET_GPIO				14
> +#define RESET_AUDIO				15
> +#define RESET_PCM0				16
> +#define RESET_VDE				17
> +#define RESET_VCE				18
> +#define RESET_GPU3D				19
> +#define RESET_NIC301				20
> +#define RESET_LENS				21
> +#define RESET_PERIPHRESET			22
> +#define RESET_USB2_0				23
> +#define RESET_TVOUT				24
> +#define RESET_HDMI				25
> +#define RESET_HDCP2TX				26
> +#define RESET_UART6				27
> +#define RESET_UART0				28
> +#define RESET_UART1				29
> +#define RESET_UART2				30
> +#define RESET_SPI0				31
> +#define RESET_SPI1				32
> +#define RESET_SPI2				33
> +#define RESET_SPI3				34
> +#define RESET_I2C0				35
> +#define RESET_I2C1				36
> +#define RESET_USB3				37
> +#define RESET_UART3				38
> +#define RESET_UART4				39
> +#define RESET_UART5				40
> +#define RESET_I2C2				41
> +#define RESET_I2C3				42
> +#define RESET_ETHERNET				43
> +#define RESET_CHIPID				44
> +#define RESET_USB2_1				45
> +#define RESET_WD0RESET				46
> +#define RESET_WD1RESET				47
> +#define RESET_WD2RESET				48
> +#define RESET_WD3RESET				49
> +#define RESET_DBG0RESET				50
> +#define RESET_DBG1RESET				51
> +#define RESET_DBG2RESET				52
> +#define RESET_DBG3RESET				53
> +
> +#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */