[PATCH v6 4/4] drm/bridge: lvds-codec: simplify error handling

[Andrzej Hajda]

Using dev_err_probe code has following advantages:
- shorter code,
- recorded defer probe reason for debugging,
- uniform error code logging.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 drivers/gpu/drm/bridge/lvds-codec.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c
index 24fb1befdfa2..f19d9f7a5db2 100644
--- a/drivers/gpu/drm/bridge/lvds-codec.c
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -71,13 +71,9 @@ static int lvds_codec_probe(struct platform_device *pdev)
 	lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev);
 	lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
 							     GPIOD_OUT_HIGH);
-	if (IS_ERR(lvds_codec->powerdown_gpio)) {
-		int err = PTR_ERR(lvds_codec->powerdown_gpio);
-
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "powerdown GPIO failure: %d\n", err);
-		return err;
-	}
+	if (IS_ERR(lvds_codec->powerdown_gpio))
+		return dev_err_probe(dev, PTR_ERR(lvds_codec->powerdown_gpio),
+				     "powerdown GPIO failure\n");
 
 	/* Locate the panel DT node. */
 	panel_node = of_graph_get_remote_node(dev->of_node, 1, 0);
-- 
2.17.1