[PATCH 2/2] clk: at91: main: do not continue if oscillators already prepared

[Claudiu Beznea]

Return in clk_main_osc_prepare()/clk_main_rc_osc_prepare() if
oscillators are already enabled.

Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation")
Fixes: 1bdf02326b71e ("clk: at91: make use of syscon/regmap internally")
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/clk/at91/clk-main.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 37c22667e831..46b4d2131989 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -74,13 +74,11 @@ static int clk_main_osc_prepare(struct clk_hw *hw)
 	regmap_read(regmap, AT91_CKGR_MOR, &tmp);
 	tmp &= ~MOR_KEY_MASK;
 
-	if (tmp & AT91_PMC_OSCBYPASS)
+	if (tmp & (AT91_PMC_OSCBYPASS | AT91_PMC_MOSCEN))
 		return 0;
 
-	if (!(tmp & AT91_PMC_MOSCEN)) {
-		tmp |= AT91_PMC_MOSCEN | AT91_PMC_KEY;
-		regmap_write(regmap, AT91_CKGR_MOR, tmp);
-	}
+	tmp |= AT91_PMC_MOSCEN | AT91_PMC_KEY;
+	regmap_write(regmap, AT91_CKGR_MOR, tmp);
 
 	while (!clk_main_osc_ready(regmap))
 		cpu_relax();
@@ -186,10 +184,12 @@ static int clk_main_rc_osc_prepare(struct clk_hw *hw)
 
 	regmap_read(regmap, AT91_CKGR_MOR, &mor);
 
-	if (!(mor & AT91_PMC_MOSCRCEN))
-		regmap_update_bits(regmap, AT91_CKGR_MOR,
-				   MOR_KEY_MASK | AT91_PMC_MOSCRCEN,
-				   AT91_PMC_MOSCRCEN | AT91_PMC_KEY);
+	if (mor & AT91_PMC_MOSCRCEN)
+		return 0;
+
+	regmap_update_bits(regmap, AT91_CKGR_MOR,
+			   MOR_KEY_MASK | AT91_PMC_MOSCRCEN,
+			   AT91_PMC_MOSCRCEN | AT91_PMC_KEY);
 
 	while (!clk_main_rc_osc_ready(regmap))
 		cpu_relax();
-- 
2.7.4