[PATCH 22/50] staging: vchi: Use enum vchiq_bulk_mode instead of vchi's transmission flags

Nicolas Saenz Julienne nsaenzjulienne at suse.de
Tue Jun 23 12:42:08 EDT 2020


vchi has a set of transfer flags which almost map 1:1 to vchiq's own
transfer modes. For the sake of simplicity let's use the later and
delete vchi's.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
---
 .../bcm2835-audio/bcm2835-vchiq.c             |  2 +-
 .../vc04_services/bcm2835-audio/bcm2835.h     |  1 +
 .../vc04_services/interface/vchi/vchi.h       |  4 +-
 .../interface/vchi/vchi_common.h              |  9 ----
 .../interface/vchiq_arm/vchiq_shim.c          | 44 ++-----------------
 .../vc04_services/vchiq-mmal/mmal-vchiq.c     |  4 +-
 6 files changed, 9 insertions(+), 55 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
index 68119246f10b..565853ec1e7a 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
@@ -348,7 +348,7 @@ int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream,
 		/* Send the message to the videocore */
 		status = vchi_bulk_queue_transmit(instance->service,
 						  src, count,
-						  VCHI_FLAGS_BLOCK_UNTIL_DATA_READ,
+						  VCHIQ_BULK_MODE_BLOCKING,
 						  NULL);
 	} else {
 		while (count > 0) {
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
index 2a94e825194f..7a0e4ab50fc7 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h
@@ -9,6 +9,7 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm-indirect.h>
+#include "interface/vchiq_arm/vchiq_if.h"
 #include "interface/vchi/vchi.h"
 
 #define MAX_SUBSTREAMS   (8)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index 92ce811fc28d..9a74ca4e1062 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -105,14 +105,14 @@ extern int32_t vchi_held_msg_release(struct vchi_held_msg *message);
 extern int32_t vchi_bulk_queue_receive(struct vchi_service *service,
 				       void *data_dst,
 				       uint32_t data_size,
-				       enum vchi_flags flags,
+				       enum vchiq_bulk_mode mode,
 				       void *transfer_handle);
 
 // Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
 extern int32_t vchi_bulk_queue_transmit(struct vchi_service *service,
 					const void *data_src,
 					uint32_t data_size,
-					enum vchi_flags flags,
+				        enum vchiq_bulk_mode mode,
 					void *transfer_handle);
 
 /******************************************************************************
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi_common.h b/drivers/staging/vc04_services/interface/vchi/vchi_common.h
index e07376fe4dfd..52b447c19445 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi_common.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi_common.h
@@ -4,15 +4,6 @@
 #ifndef VCHI_COMMON_H_
 #define VCHI_COMMON_H_
 
-//flags used when sending messages (must be bitmapped)
-enum vchi_flags {
-	VCHI_FLAGS_NONE                      = 0x0,
-	VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE   = 0x1,   // waits for message to be received, or sent (NB. not the same as being seen on other side)
-	VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE = 0x2,   // run a callback when message sent
-	VCHI_FLAGS_BLOCK_UNTIL_QUEUED        = 0x4,   // return once the transfer is in a queue ready to go
-	VCHI_FLAGS_BLOCK_UNTIL_DATA_READ     = 0x10,
-};
-
 //callback reasons when an event occurs on a service
 enum vchi_callback_reason {
 	/*
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c
index 0466512cfe3c..3a5545e0db6b 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c
@@ -3,6 +3,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 
+#include "vchiq_if.h"
 #include "../vchi/vchi.h"
 #include "vchiq.h"
 #include "vchiq_core.h"
@@ -57,30 +58,11 @@ EXPORT_SYMBOL(vchi_queue_kernel_message);
  *
  ***********************************************************/
 int32_t vchi_bulk_queue_receive(struct vchi_service *service, void *data_dst,
-				uint32_t data_size, enum vchi_flags flags,
+				uint32_t data_size, enum vchiq_bulk_mode mode,
 				void *bulk_handle)
 {
-	enum vchiq_bulk_mode mode;
 	enum vchiq_status status;
 
-	switch ((int)flags) {
-	case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
-		| VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
-		WARN_ON(!service->callback);
-		mode = VCHIQ_BULK_MODE_CALLBACK;
-		break;
-	case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
-		mode = VCHIQ_BULK_MODE_BLOCKING;
-		break;
-	case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
-	case VCHI_FLAGS_NONE:
-		mode = VCHIQ_BULK_MODE_NOCALLBACK;
-		break;
-	default:
-		WARN(1, "unsupported message\n");
-		return VCHIQ_ERROR;
-	}
-
 	while (1) {
 		status = vchiq_bulk_receive(service->handle, data_dst,
 			data_size, bulk_handle, mode);
@@ -116,31 +98,11 @@ EXPORT_SYMBOL(vchi_bulk_queue_receive);
 int32_t vchi_bulk_queue_transmit(struct vchi_service *service,
 				 const void *data_src,
 				 uint32_t data_size,
-				 enum vchi_flags flags,
+				 enum vchiq_bulk_mode mode,
 				 void *bulk_handle)
 {
-	enum vchiq_bulk_mode mode;
 	enum vchiq_status status;
 
-	switch ((int)flags) {
-	case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
-		| VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
-		WARN_ON(!service->callback);
-		mode = VCHIQ_BULK_MODE_CALLBACK;
-		break;
-	case VCHI_FLAGS_BLOCK_UNTIL_DATA_READ:
-	case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
-		mode = VCHIQ_BULK_MODE_BLOCKING;
-		break;
-	case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
-	case VCHI_FLAGS_NONE:
-		mode = VCHIQ_BULK_MODE_NOCALLBACK;
-		break;
-	default:
-		WARN(1, "unsupported message\n");
-		return VCHIQ_ERROR;
-	}
-
 	while (1) {
 		status = vchiq_bulk_transmit(service->handle, data_src,
 			data_size, bulk_handle, mode);
diff --git a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
index 4ee4601cba1c..153a81a11ffc 100644
--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
@@ -29,6 +29,7 @@
 #include "mmal-vchiq.h"
 #include "mmal-msg.h"
 
+#include "interface/vchiq_arm/vchiq_if.h"
 #include "interface/vchi/vchi.h"
 
 /*
@@ -300,8 +301,7 @@ static void buffer_to_host_work_cb(struct work_struct *work)
 				       * of 4 bytes
 				       */
 				      (len + 3) & ~3,
-				      VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE |
-				      VCHI_FLAGS_BLOCK_UNTIL_QUEUED,
+				      VCHIQ_BULK_MODE_CALLBACK,
 				      msg_context);
 
 	vchi_service_release(instance->service);
-- 
2.27.0




More information about the linux-arm-kernel mailing list