[PATCH 08/15] net: phy: check the PHY presence in get_phy_id()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski at baylibre.com>

get_phy_id() is only called from get_phy_device() so the check for the
0x1fffffff value can be pulled into the former. This way it'll be easier
to remove get_phy_device() later on.

Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
 drivers/net/phy/phy_device.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8037a9663a85..eccbf6aea63d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -806,6 +806,10 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
 
 	*phy_id |= phy_reg;
 
+	/* If the phy_id is mostly Fs, there is no device there */
+	if ((*phy_id & 0x1fffffff) == 0x1fffffff)
+		return -ENODEV;
+
 	return 0;
 }
 
@@ -832,10 +836,6 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 	if (r)
 		return ERR_PTR(r);
 
-	/* If the phy_id is mostly Fs, there is no device there */
-	if ((phy_id & 0x1fffffff) == 0x1fffffff)
-		return ERR_PTR(-ENODEV);
-
 	return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
 }
 EXPORT_SYMBOL(get_phy_device);
-- 
2.26.1