[PATCH v9 5/5] dt-bindings: display: imx: add bindings for DCSS

Guido Günther agx at sigxcpu.org
Fri Jul 31 04:52:54 EDT 2020


Hi,
On Fri, Jul 31, 2020 at 11:18:33AM +0300, Laurentiu Palcu wrote:
> From: Laurentiu Palcu <laurentiu.palcu at nxp.com>
> 
> Add bindings for iMX8MQ Display Controller Subsystem.
> 
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu at nxp.com>
> ---
> Changes in v9:
>  * Include imx8mq-clock.h in the example so we can use clock names
>    instead of their values;

Reviewed-by: Guido Günther <agx at sigxcpu.org> 

(and passed DT bindings check for me)
 -- Guido
> 
>  .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 ++++++++++++++++++
>  1 file changed, 108 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> new file mode 100644
> index 000000000000..f1f25aa794d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 NXP
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: iMX8MQ Display Controller Subsystem (DCSS)
> +
> +maintainers:
> +  - Laurentiu Palcu <laurentiu.palcu at nxp.com>
> +
> +description:
> +
> +  The DCSS (display controller sub system) is used to source up to three
> +  display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
> +  2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
> +  image processing capabilities are included to provide a solution capable of
> +  driving next generation high dynamic range displays.
> +
> +properties:
> +  compatible:
> +    const: nxp,imx8mq-dcss
> +
> +  reg:
> +    items:
> +      - description: DCSS base address and size, up to IRQ steer start
> +      - description: DCSS BLKCTL base address and size
> +
> +  interrupts:
> +    items:
> +      - description: Context loader completion and error interrupt
> +      - description: DTG interrupt used to signal context loader trigger time
> +      - description: DTG interrupt for Vblank
> +
> +  interrupt-names:
> +    items:
> +      - const: ctxld
> +      - const: ctxld_kick
> +      - const: vblank
> +
> +  clocks:
> +    items:
> +      - description: Display APB clock for all peripheral PIO access interfaces
> +      - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
> +      - description: RTRAM clock
> +      - description: Pixel clock, can be driven either by HDMI phy clock or MIPI
> +      - description: DTRC clock, needed by video decompressor
> +
> +  clock-names:
> +    items:
> +      - const: apb
> +      - const: axi
> +      - const: rtrm
> +      - const: pix
> +      - const: dtrc
> +
> +  assigned-clocks:
> +    items:
> +      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT
> +      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM
> +      - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or
> +                     IMX8MQ_VIDEO_PLL1_REF_SEL
> +
> +  assigned-clock-parents:
> +    items:
> +      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
> +      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
> +      - description: Phandle and clock specifier of IMX8MQ_CLK_27M
> +
> +  assigned-clock-rates:
> +    items:
> +      - description: Must be 800 MHz
> +      - description: Must be 400 MHz
> +
> +  port:
> +    type: object
> +    description:
> +      A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    dcss: display-controller at 32e00000 {
> +        compatible = "nxp,imx8mq-dcss";
> +        reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
> +        interrupts = <6>, <8>, <9>;
> +        interrupt-names = "ctxld", "ctxld_kick", "vblank";
> +        interrupt-parent = <&irqsteer>;
> +        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>,
> +                 <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>,
> +                 <&clk IMX8MQ_CLK_DISP_DTRC>;
> +        clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
> +        assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>,
> +                          <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>;
> +        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>,
> +                                 <&clk IMX8MQ_CLK_27M>;
> +        assigned-clock-rates = <800000000>,
> +                               <400000000>;
> +        port {
> +            dcss_out: endpoint {
> +                remote-endpoint = <&hdmi_in>;
> +            };
> +        };
> +    };
> +
> -- 
> 2.23.0
> 



More information about the linux-arm-kernel mailing list