[PATCH v2] clk: bcm2835: Do not use prediv with bcm2711's PLLs

[Florian Fainelli]

On 7/30/2020 11:26 AM, Nicolas Saenz Julienne wrote:
> Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
> feedback loop. Bypass it by zeroing fb_prediv_mask when running on
> bcm2711.
> 
> Note that, since the prediv configuration bits were re-purposed, this
> was triggering miscalculations on all clocks hanging from the VPU clock,
> notably the aux UART, making its output unintelligible.
> 
> Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
> Reported-by: Nathan Chancellor <natechancellor at gmail.com>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>

Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
-- 
Florian