[PATCH] clk: at91: clk-main: update key before writing AT91_CKGR_MOR
Claudiu Beznea
claudiu.beznea at microchip.com
Thu Jul 30 05:03:23 EDT 2020
SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator
Main Oscillator Register) that writing any value other than
0x37 on KEY field aborts the write operation. Use the key when
selecting main clock parent.
Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation")
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
drivers/clk/at91/clk-main.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 5c83e899084f..cfae2f59df66 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -437,12 +437,17 @@ static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index)
return -EINVAL;
regmap_read(regmap, AT91_CKGR_MOR, &tmp);
- tmp &= ~MOR_KEY_MASK;
if (index && !(tmp & AT91_PMC_MOSCSEL))
- regmap_write(regmap, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL);
+ tmp = AT91_PMC_MOSCSEL;
else if (!index && (tmp & AT91_PMC_MOSCSEL))
- regmap_write(regmap, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL);
+ tmp = 0;
+ else
+ return 0;
+
+ regmap_update_bits(regmap, AT91_CKGR_MOR,
+ AT91_PMC_MOSCSEL | MOR_KEY_MASK,
+ tmp | AT91_PMC_KEY);
while (!clk_sam9x5_main_ready(regmap))
cpu_relax();
--
2.7.4
More information about the linux-arm-kernel
mailing list