[RFC PATCH] arm64: defconfig: Disable fine-grained task level IRQ time accounting

[Vladimir Oltean]

On Thu, Jul 30, 2020 at 09:23:44AM +0200, Kurt Kanzenbach wrote:
> Hi Vladimir,
> 
> On Wed Jul 29 2020, Vladimir Oltean wrote:
> > For more context, here is my original report of the issue:
> > https://lkml.org/lkml/2020/6/4/1062
> >
> > Just like you, I could not reproduce the RCU stalls and system hang on a
> > 5.6-rt kernel, just on mainline and derivatives, using the plain
> > defconfig.
> >
> > The issue is not specific to Layerscape or i.MX8, but rather I was able
> > to see the same behavior on Marvell Armada 37xx as well as Qualcomm
> > MSM8976.
> >
> > So, while of course I agree that disabling IRQ time accounting for arm64
> > isn't a real solution, it isn't by far an exaggerated proposal either.
> > Nonetheless, the patch is just a RFC and should be treated as such. We
> > are at a loss when it comes to debugging this any further and we would
> > appreciate some pointers.
> 
> Yeah, sure. I'll try to reproduce this issue first. So it triggers with:
> 
>  * arm64
>  * mainline, not -rt kernel
>  * opened serial console
>  * irq accounting enabled
> 
> Anything else?
> 
> Thanks,
> Kurt

Thanks for giving a helping hand, Kurt. The defconfig should be enough.
In the interest of full disclosure, the only arm64 device on which we
didn't reproduce this was the 16-core LX2160A. But we did reproduce on
that with maxcpus=1 though. And also on msm8976 with all 8 cores booted.
Just mentioning this in case you're testing on a 16-core system, you
might want to reduce the number a bit.

Thanks,
-Vladimir