[PATCH v4 2/4] arm64: cpufeature: Modify address authentication cpufeature to exact
Dave Martin
Dave.Martin at arm.com
Wed Jul 29 10:31:02 EDT 2020
On Wed, Jul 29, 2020 at 01:28:06PM +0100, Suzuki K Poulose wrote:
> On 07/29/2020 11:36 AM, Dave Martin wrote:
> >On Fri, Jul 10, 2020 at 01:30:08PM +0530, Amit Daniel Kachhap wrote:
> >>The current address authentication cpufeature levels are set as LOWER_SAFE
> >>which is not compatible with the different configurations added for Armv8.3
> >>ptrauth enhancements as the different levels have different behaviour and
> >>there is no tunable to enable the lower safe versions. This is rectified
> >>by setting those cpufeature type as EXACT.
> >>
> >>The current cpufeature framework also does not interfere in the booting of
> >>non-exact secondary cpus but rather marks them as tainted. As a workaround
> >>this is fixed by replacing the generic match handler with a new handler
> >>specific to ptrauth.
> >>
> >>After this change, if there is any variation in ptrauth configurations in
> >>secondary cpus from boot cpu then those mismatched cpus are parked in an
> >>infinite loop.
> >>
> >>Signed-off-by: Amit Daniel Kachhap <amit.kachhap at arm.com>
> >>[Suzuki: Introduce new matching function for address authentication]
> >>Suggested-by: Suzuki K Poulose <suzuki.poulose at arm.com>
> >>---
> >>Changes since v3:
> >> * Commit logs cleanup.
> >>
> >> arch/arm64/kernel/cpufeature.c | 56 ++++++++++++++++++++++++++++------
> >> 1 file changed, 47 insertions(+), 9 deletions(-)
> >>
> >>diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
> >>index 9fae0efc80c1..8ac8c18f70c9 100644
> >>--- a/arch/arm64/kernel/cpufeature.c
> >>+++ b/arch/arm64/kernel/cpufeature.c
> >>@@ -210,9 +210,9 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
> >> ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_FCMA_SHIFT, 4, 0),
> >> ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_JSCVT_SHIFT, 4, 0),
> >> ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
> >>- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_API_SHIFT, 4, 0),
> >>+ FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_API_SHIFT, 4, 0),
> >> ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
> >>- FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_APA_SHIFT, 4, 0),
> >>+ FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_APA_SHIFT, 4, 0),
> >> ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_DPB_SHIFT, 4, 0),
> >> ARM64_FTR_END,
> >> };
> >>@@ -1605,11 +1605,49 @@ static void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused)
> >> #endif /* CONFIG_ARM64_RAS_EXTN */
> >> #ifdef CONFIG_ARM64_PTR_AUTH
> >>-static bool has_address_auth(const struct arm64_cpu_capabilities *entry,
> >>- int __unused)
> >>+static bool has_address_auth_cpucap(const struct arm64_cpu_capabilities *entry, int scope)
> >> {
> >>- return __system_matches_cap(ARM64_HAS_ADDRESS_AUTH_ARCH) ||
> >>- __system_matches_cap(ARM64_HAS_ADDRESS_AUTH_IMP_DEF);
> >>+ int local_cpu_auth;
> >>+ static int boot_cpu_auth_arch;
> >>+ static int boot_cpu_auth_imp_def;
> >
> >I guess having static variables here is probably safe, provided that
> >calls to this function are strictly serialised with sufficiently
> >heavyweight synchronisation.
> >
>
> These are initialised with the primary boot CPU. And later on called
> from CPU bring up. So they are serialized, except when
> this_cpu_has_cap() could be called. But this is fine, as it is a read
> operation.
To guarantee that any update to those variables is visible to a booting
CPU, we'd probably need a DSB and/or DMB somewhere. For now I don't see
anything explicity, though it's likely we're getting them as a side
effect of something else.
In any case, I guess we've been managing for some time without this
being strictly correct.
> >Might be worth a comment.
> >
> >Coming up with a cleaner approach using locks or atomics might be
> >overkill, but other folks might take a stronger view on this.
> >
> >>+
> >>+ /* We don't expect to be called with SCOPE_SYSTEM */
> >>+ WARN_ON(scope == SCOPE_SYSTEM);
> >>+
> >>+ local_cpu_auth = cpuid_feature_extract_field(__read_sysreg_by_encoding(entry->sys_reg),
> >>+ entry->field_pos, entry->sign);
> >>+ /*
> >>+ * The ptr-auth feature levels are not intercompatible with
> >>+ * lower levels. Hence we must match all the CPUs with that
> >>+ * of the boot CPU. So cache the level of boot CPU and compare
> >>+ * it against the secondary CPUs.
> >>+ */
> >>+ if (scope & SCOPE_BOOT_CPU) {
> >>+ if (entry->capability == ARM64_HAS_ADDRESS_AUTH_IMP_DEF) {
> >>+ boot_cpu_auth_imp_def = local_cpu_auth;
Actually, can we make use of read_sanitised_ftr_reg() here rather than
having to cache the values in static variables?
> >>+ return boot_cpu_auth_imp_def >= entry->min_field_value;
> >>+ } else if (entry->capability == ARM64_HAS_ADDRESS_AUTH_ARCH) {
> >>+ boot_cpu_auth_arch = local_cpu_auth;
> >>+ return boot_cpu_auth_arch >= entry->min_field_value;
> >>+ }
> >>+ } else if (scope & SCOPE_LOCAL_CPU) {
> >>+ if (entry->capability == ARM64_HAS_ADDRESS_AUTH_IMP_DEF) {
> >>+ return (local_cpu_auth >= entry->min_field_value) &&
> >>+ (local_cpu_auth == boot_cpu_auth_imp_def);
> >>+ }
> >>+ if (entry->capability == ARM64_HAS_ADDRESS_AUTH_ARCH) {
> >>+ return (local_cpu_auth >= entry->min_field_value) &&
> >>+ (local_cpu_auth == boot_cpu_auth_arch);
> >>+ }
> >>+ }
> >
> >This looks complex. I guess this is something to do with the change to
> >FTR_EXACT, but won't the cpufeatures code do the right thing anyway with
> >mismatched features?
>
> Part of the issue is that the capability is SCOPE_BOOT_CPU. So,
> we need to verify the features on the secondary CPUs, making sure that
> they match the "level" as detected by the boot CPU. Otherwise, we could
> end up with mismatched CPUs, where all of them support different levels
> of AUTH.
>
> Also, implies that the checks are performed before the cpufeature gets
> updated with the secondary CPUs values. Any conflict implies the
> secondary CPU ends up parked.
>
> So, the "FTR_EXACT" change only has an impact of keeping the cpufeature
> infrastructure sanitised only in the absence of CONFIG_ARM64_PTRAUTH.
I think the framework could be improved to handle this kind of thing
more gracefully, but I don't see an obviously better way to do this for
now, especially if this is just a one-off case.
(I certainly hope we don't get more features that behave this way...)
Cheers
---Dave
More information about the linux-arm-kernel
mailing list