[PATCH 1/6] dt-bindings: soc: ti: Add TI PRUSS bindings

Grzegorz Jaszczyk grzegorz.jaszczyk at linaro.org
Wed Jul 29 07:02:03 EDT 2020


This patch adds the bindings for the Programmable Real-Time Unit
and Industrial Communication Subsystem (PRU-ICSS) present on various
TI SoCs. The IP is present on multiple TI SoC architecture families
including the OMAP architecture SoCs such as AM33xx, AM437x and
AM57xx; and on a Keystone 2 architecture based 66AK2G SoC. It is
also present on the Davinci based OMAPL138 SoCs and K3 architecture
based AM65x and J721E SoCs as well.

The IP has a number of sub-modules some of which are represented as
their own devices. This binding covers only the top-level sub-system
devices, and some sub-modules like MDIO, MII_RT (Ethernet MII_RT module
with MII ports) and IEP (Industrial Ethernet Peripheral). The remaining
sub-modules bindings shall be defined in the respective driver
subsystem bindings folders. Couple of full examples have also been
added demonstrating the devices on AM335x and AM437x SoCs.

Signed-off-by: Suman Anna <s-anna at ti.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
Reviewed-by: Lee Jones <lee.jones at linaro.org>
---
 .../devicetree/bindings/soc/ti/ti,pruss.yaml       | 383 +++++++++++++++++++++
 1 file changed, 383 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml

diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
new file mode 100644
index 0000000..4b7a098
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -0,0 +1,383 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,pruss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |+
+  TI Programmable Real-Time Unit and Industrial Communication Subsystem
+
+maintainers:
+  - Suman Anna <s-anna at ti.com>
+
+description: |+
+
+  The Programmable Real-Time Unit and Industrial Communication Subsystem
+  (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x,
+  Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC
+  cores (Programmable Real-Time Units, or PRUs), shared RAM, data and
+  instruction RAMs, some internal peripheral modules to facilitate industrial
+  communication, and an interrupt controller.
+
+  The programmable nature of the PRUs provide flexibility to implement custom
+  peripheral interfaces, fast real-time responses, or specialized data handling.
+  The common peripheral modules include the following,
+    - an Ethernet MII_RT module with two MII ports
+    - an MDIO port to control external Ethernet PHYs
+    - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial
+      Ethernet functions
+    - an Enhanced Capture Module (eCAP)
+    - an Industrial Ethernet Timer with 7/9 capture and 16 compare events
+    - a 16550-compatible UART to support PROFIBUS
+    - Enhanced GPIO with async capture and serial support
+
+  A PRU-ICSS subsystem can have up to three shared data memories. A PRU core
+  acts on a primary Data RAM (there are usually 2 Data RAMs) at its address
+  0x0, but also has access to a secondary Data RAM (primary to the other PRU
+  core) at its address 0x2000. A shared Data RAM, if present, can be accessed
+  by both the PRU cores. The Interrupt Controller (INTC) and a CFG module are
+  common to both the PRU cores. Each PRU core also has a private instruction
+  RAM, and specific register spaces for Control and Debug functionalities.
+
+  Various sub-modules within a PRU-ICSS subsystem are represented as individual
+  nodes and are defined using a parent-child hierarchy depending on their
+  integration within the IP and the SoC. These nodes are described in the
+  following sections.
+
+
+  PRU-ICSS Node
+  ==============
+  Each PRU-ICSS instance is represented as its own node with the individual PRU
+  processor cores, the memories node, an INTC node and an MDIO node represented
+  as child nodes within this PRUSS node. This node shall be a child of the
+  corresponding interconnect bus nodes or target-module nodes.
+
+  See ../../mfd/syscon.yaml for generic SysCon binding details.
+
+
+properties:
+  compatible:
+    enum:
+      - ti,am3356-pruss  # for AM335x SoC family
+      - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0
+      - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1
+      - ti,am5728-pruss  # for AM57xx SoC family
+      - ti,k2g-pruss     # for 66AK2G SoC family
+      - ti,am654-icssg   # for K3 AM65x SoC family
+      - ti,j721e-icssg   # for K3 J721E SoC family
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+    description: |
+      Standard ranges definition using addresses from 0 for child nodes.
+
+  power-domains:
+    description: |
+      This property is as per sci-pm-domain.txt.
+
+  memories:
+    description: |
+      The various Data RAMs within a single PRU-ICSS unit are represented as a
+      single node with the name 'memories'.
+
+    type: object
+
+    properties:
+      reg:
+        minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM.
+        maxItems: 3
+        items:
+          - description: Address and size of the Data RAM0.
+          - description: Address and size of the Data RAM1.
+          - description: |
+              Address and size of the Shared Data RAM. Note that on AM437x one
+              of two PRUSS units don't contain Shared RAM, while the second one
+              has it.
+
+      reg-names:
+        minItems: 2
+        maxItems: 3
+        items:
+          - const: dram0
+          - const: dram1
+          - const: shrdram2
+
+    required:
+      - reg
+      - reg-names
+
+  cfg:
+    description: |
+      PRU-ICSS configuration space. CFG sub-module represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-cfg
+          - const: syscon
+
+      reg:
+        maxItems: 1
+
+  iep:
+    description: |
+      Industrial Ethernet Peripheral to manage/generate Industrial Ethernet
+      functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x,
+      AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x & J721E SoCs ). IEP
+      is used for creating PTP clocks and generating PPS signals. The bindings
+      for this shall be defined in ../../net/ti,icss-iep.yaml.
+
+    type: object
+
+  mii-rt:
+    description: |
+      Real-Time Ethernet to support multiple industrial communication protocols.
+      MII-RT sub-module represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-mii
+          - const: syscon
+
+      reg:
+        maxItems: 1
+
+  mii-g-rt:
+    description: |
+      The Real-time Media Independent Interface to support multiple industrial
+      communication protocols (G stands for Gigabit). MII-G-RT sub-module
+      represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-mii-g
+          - const: syscon
+
+      reg:
+        maxItems: 1
+
+  interrupt-controller:
+    description: |
+      PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
+      that is common to all the PRU cores. This should be represented as an
+      interrupt-controller node. The bindings for this shall be defined in
+      ../../interrupt-controller/ti,pruss-intc.yaml.
+
+    type: object
+
+  mdio:
+    description: |
+      MDIO Node. Each PRUSS has an MDIO module that can be used to control
+      external PHYs. The MDIO module used within the PRU-ICSS is an instance of
+      the MDIO Controller used in TI Davinci SoCs.
+
+    allOf:
+      - $ref: /schemas/net/ti,davinci-mdio.yaml#
+
+    type: object
+
+patternProperties:
+  "^(pru|rtu|txpru)@[0-9a-f]+$":
+    description: |
+      PRU Node. Each PRUSS has dual PRU cores, each represented as a RemoteProc
+      device through a PRU child node each. Each node can optionally be rendered
+      inactive by using the standard DT string property, "status". The ICSSG IP
+      present on K3 SoCs have additional auxiliary PRU cores with slightly
+      different IP integration. The bindings for this shall be defined in
+      ../../remoteproc/ti,pru-rproc.yaml
+
+    type: object
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+# Due to inability of correctly verifying sub-nodes with an @address through
+# the "required" list, the required sub-nodes below are commented out for now.
+
+#required:
+# - memories
+# - interrupt-controller
+# - pru
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ti,k2g-pruss
+          - ti,am654-icssg
+          - ti,j721e-icssg
+then:
+  required:
+    - power-domains
+
+examples:
+  - |
+
+    /* Example 1 AM33xx PRU-ICSS */
+    pruss: pruss at 0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_mem: memories at 0 {
+            reg = <0x0 0x2000>,
+                  <0x2000 0x2000>,
+                  <0x10000 0x3000>;
+            reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pruss_cfg: cfg at 26000 {
+            compatible = "ti,pruss-cfg", "syscon";
+            reg = <0x26000 0x2000>;
+        };
+
+        pruss_iep: iep at 2e000 {
+            compatible = "ti,am3356-icss-iep";
+            reg = <0x2e000 0x31c>;
+            clocks = <&pruss_iepclk_mux>;
+        };
+
+        pruss_mii_rt: mii-rt at 32000 {
+            compatible = "ti,pruss-mii", "syscon";
+            reg = <0x32000 0x58>;
+        };
+
+        pruss_intc: interrupt-controller at 20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupts = <20 21 22 23 24 25 26 27>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr5",
+                              "host_intr6", "host_intr7";
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+
+        pru0: pru at 34000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x34000 0x2000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru0-fw";
+        };
+
+        pru1: pru at 38000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x38000 0x2000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru1-fw";
+        };
+
+        pruss_mdio: mdio at 32400 {
+            compatible = "ti,davinci_mdio";
+            reg = <0x32400 0x90>;
+            clocks = <&dpll_core_m4_ck>;
+            clock-names = "fck";
+            bus_freq = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+  - |
+
+    /* Example 2 AM43xx PRU-ICSS with PRUSS1 node */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pruss1: pruss at 0 {
+        compatible = "ti,am4376-pruss";
+        reg = <0x0 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss1_mem: memories at 0 {
+            reg = <0x0 0x2000>,
+                  <0x2000 0x2000>,
+                  <0x10000 0x8000>;
+            reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pruss1_cfg: cfg at 26000 {
+            compatible = "ti,pruss-cfg", "syscon";
+            reg = <0x26000 0x2000>;
+        };
+
+        pruss1_iep: iep at 2e000 {
+            compatible = "ti,am3356-icss-iep";
+            reg = <0x2e000 0x31c>;
+            clocks = <&pruss_iepclk_mux>;
+        };
+
+        pruss1_mii_rt: mii-rt at 32000 {
+            compatible = "ti,pruss-mii", "syscon";
+            reg = <0x32000 0x58>;
+        };
+
+        pruss1_intc: interrupt-controller at 20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr6",
+                              "host_intr7";
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+
+        pru1_0: pru at 34000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x34000 0x3000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_0-fw";
+        };
+
+        pru1_1: pru at 38000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x38000 0x3000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_1-fw";
+        };
+
+        pruss1_mdio: mdio at 32400 {
+            compatible = "ti,davinci_mdio";
+            reg = <0x32400 0x90>;
+            clocks = <&dpll_core_m4_ck>;
+            clock-names = "fck";
+            bus_freq = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+...
-- 
2.7.4




More information about the linux-arm-kernel mailing list