[PATCH V2 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations

Anson Huang Anson.Huang at nxp.com
Tue Jul 28 22:20:26 EDT 2020


According to reference manual, the i.MX7ULP WDOG's operations should
follow below sequence:

1. disable global interrupts;
2. unlock the wdog and wait unlock bit set;
3. reconfigure the wdog and wait for reconfiguration bit set;
4. enabel global interrupts.

Strictly follow the recommended sequence can make it more robust.

Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
---
Changes since V1:
	- use readl_poll_timeout_atomic() instead of usleep_ranges() since IRQ is disabled.
---
 drivers/watchdog/imx7ulp_wdt.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
index 7993c8c..7d2b12e 100644
--- a/drivers/watchdog/imx7ulp_wdt.c
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -5,6 +5,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -36,6 +37,7 @@
 #define DEFAULT_TIMEOUT	60
 #define MAX_TIMEOUT	128
 #define WDOG_CLOCK_RATE	1000
+#define WDOG_WAIT_TIMEOUT	10000
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, bool, 0000);
@@ -48,17 +50,31 @@ struct imx7ulp_wdt_device {
 	struct clk *clk;
 };
 
+static inline void imx7ulp_wdt_wait(void __iomem *base, u32 mask)
+{
+	u32 val = readl(base + WDOG_CS);
+
+	if (!(val & mask))
+		WARN_ON(readl_poll_timeout_atomic(base + WDOG_CS, val,
+						  val & mask, 0,
+						  WDOG_WAIT_TIMEOUT));
+}
+
 static void imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 
 	u32 val = readl(wdt->base + WDOG_CS);
 
+	local_irq_disable();
 	writel(UNLOCK, wdt->base + WDOG_CNT);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
 	if (enable)
 		writel(val | WDOG_CS_EN, wdt->base + WDOG_CS);
 	else
 		writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
+	local_irq_enable();
 }
 
 static bool imx7ulp_wdt_is_enabled(void __iomem *base)
@@ -72,7 +88,12 @@ static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 
+	local_irq_disable();
+	writel(UNLOCK, wdt->base + WDOG_CNT);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
 	writel(REFRESH, wdt->base + WDOG_CNT);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
+	local_irq_enable();
 
 	return 0;
 }
@@ -98,8 +119,12 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 	u32 val = WDOG_CLOCK_RATE * timeout;
 
+	local_irq_disable();
 	writel(UNLOCK, wdt->base + WDOG_CNT);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
 	writel(val, wdt->base + WDOG_TOVAL);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
+	local_irq_enable();
 
 	wdog->timeout = timeout;
 
@@ -140,15 +165,19 @@ static void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
 {
 	u32 val;
 
+	local_irq_disable();
 	/* unlock the wdog for reconfiguration */
 	writel_relaxed(UNLOCK_SEQ0, base + WDOG_CNT);
 	writel_relaxed(UNLOCK_SEQ1, base + WDOG_CNT);
+	imx7ulp_wdt_wait(base, WDOG_CS_ULK);
 
 	/* set an initial timeout value in TOVAL */
 	writel(timeout, base + WDOG_TOVAL);
 	/* enable 32bit command sequence and reconfigure */
 	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
 	writel(val, base + WDOG_CS);
+	imx7ulp_wdt_wait(base, WDOG_CS_RCS);
+	local_irq_enable();
 }
 
 static void imx7ulp_wdt_action(void *data)
-- 
2.7.4




More information about the linux-arm-kernel mailing list