[PATCH 1/4] drivers/perf: Add support for ARMv8.3-SPE

[Leo Yan]

Hi Wei,

On Fri, Jul 24, 2020 at 05:16:04PM +0800, Wei Li wrote:
> Armv8.3 extends the SPE by adding:
> - Alignment field in the Events packet, and filtering on this event
>   using PMSEVFR_EL1.
> - Support for the Scalable Vector Extension (SVE).
> 
> The main additions for SVE are:
> - Recording the vector length for SVE operations in the Operation Type
>   packet. It is not possible to filter on vector length.
> - Incomplete predicate and empty predicate fields in the Events packet,
>   and filtering on these events using PMSEVFR_EL1.
> 
> Update the check of pmsevfr for empty/partial predicated SVE and
> alignment event in kernel driver.
> 
> Signed-off-by: Wei Li <liwei391 at huawei.com>
> ---
>  arch/arm64/include/asm/sysreg.h |  4 +++-
>  drivers/perf/arm_spe_pmu.c      | 18 ++++++++++++++----
>  2 files changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index 463175f80341..be4c44ccdb56 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -281,7 +281,6 @@
>  #define SYS_PMSFCR_EL1_ST_SHIFT		18
>  
>  #define SYS_PMSEVFR_EL1			sys_reg(3, 0, 9, 9, 5)
> -#define SYS_PMSEVFR_EL1_RES0		0x0000ffff00ff0f55UL
>  
>  #define SYS_PMSLATFR_EL1		sys_reg(3, 0, 9, 9, 6)
>  #define SYS_PMSLATFR_EL1_MINLAT_SHIFT	0
> @@ -769,6 +768,9 @@
>  #define ID_AA64DFR0_PMUVER_8_5		0x6
>  #define ID_AA64DFR0_PMUVER_IMP_DEF	0xf
>  
> +#define ID_AA64DFR0_PMSVER_8_2		0x1
> +#define ID_AA64DFR0_PMSVER_8_3		0x2
> +
>  #define ID_DFR0_PERFMON_SHIFT		24
>  
>  #define ID_DFR0_PERFMON_8_1		0x4
> diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
> index e51ddb6d63ed..5ec7ee0c8fa1 100644
> --- a/drivers/perf/arm_spe_pmu.c
> +++ b/drivers/perf/arm_spe_pmu.c
> @@ -54,7 +54,7 @@ struct arm_spe_pmu {
>  	struct hlist_node			hotplug_node;
>  
>  	int					irq; /* PPI */
> -
> +	int					pmuver;

Since the version number is only 4 bits width, 'u16' would be enough
to record SPE version number.

>  	u16					min_period;
>  	u16					counter_sz;
>  
> @@ -80,6 +80,15 @@ struct arm_spe_pmu {
>  /* Keep track of our dynamic hotplug state */
>  static enum cpuhp_state arm_spe_pmu_online;
>  
> +static u64 sys_pmsevfr_el1_mask[] = {
> +	[ID_AA64DFR0_PMSVER_8_2] = GENMASK_ULL(63, 48) | GENMASK_ULL(31, 24) |
> +		GENMASK_ULL(15, 12) | BIT_ULL(7) | BIT_ULL(5) | BIT_ULL(3) |
> +		BIT_ULL(1),
> +	[ID_AA64DFR0_PMSVER_8_3] = GENMASK_ULL(63, 48) | GENMASK_ULL(31, 24) |
> +		GENMASK_ULL(18, 17) | GENMASK_ULL(15, 11) | BIT_ULL(7) |
> +		BIT_ULL(5) | BIT_ULL(3) | BIT_ULL(1),
> +};

Seems to me, the definitions for Aarch64 system registers should be
placed into the file 'arch/arm64/include/asm/sysreg.h'.  Like below
two macros:

  #define SYS_PMSEVFR_EL1_RES0_8_2		0x0000ffff00ff0f55UL
  #define SYS_PMSEVFR_EL1_RES0_8_3		...

Let's wait for Will or Mark Rutland's comments for this, in case I
mislead for this.

> +
>  enum arm_spe_pmu_buf_fault_action {
>  	SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
>  	SPE_PMU_BUF_FAULT_ACT_FATAL,
> @@ -670,7 +679,7 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
>  	    !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
>  		return -ENOENT;
>  
> -	if (arm_spe_event_to_pmsevfr(event) & SYS_PMSEVFR_EL1_RES0)
> +	if (arm_spe_event_to_pmsevfr(event) & ~sys_pmsevfr_el1_mask[spe_pmu->pmuver])
>  		return -EOPNOTSUPP;
>  
>  	if (attr->exclude_idle)
> @@ -937,6 +946,7 @@ static void __arm_spe_pmu_dev_probe(void *info)
>  			fld, smp_processor_id());
>  		return;
>  	}
> +	spe_pmu->pmuver = fld;
>  
>  	/* Read PMBIDR first to determine whether or not we have access */
>  	reg = read_sysreg_s(SYS_PMBIDR_EL1);
> @@ -1027,8 +1037,8 @@ static void __arm_spe_pmu_dev_probe(void *info)
>  	}
>  
>  	dev_info(dev,
> -		 "probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
> -		 cpumask_pr_args(&spe_pmu->supported_cpus),
> +		 "v%d probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",

Let's output explict info, like:

  "probed for CPUs %*pbl [pmuver %d, max_record_sz %u, align %u, features 0x%llx]\n",

Thanks,
Leo

> +		 spe_pmu->pmuver, cpumask_pr_args(&spe_pmu->supported_cpus),
>  		 spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features);
>  
>  	spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED;
> -- 
> 2.17.1
>