[PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld

[Michael Walle]

Am 2020-07-28 10:27, schrieb Lee Jones:
> On Tue, 28 Jul 2020, Michael Walle wrote:
> 
>> Am 2020-07-28 09:24, schrieb Lee Jones:
>> > On Sun, 26 Jul 2020, Michael Walle wrote:
>> >
>> > > Add a device tree bindings for the board management controller found
>> > > on
>> > > the Kontron SMARC-sAL28 board.
>> > >
>> > > Signed-off-by: Michael Walle <michael at walle.cc>
>> > > Reviewed-by: Rob Herring <robh at kernel.org>
>> > > ---
>> > > Changes since v5:
>> > >  - none
>> > >
>> > > Changes since v4:
>> > >  - fix the regex of the unit-address
>> > >
>> > > Changes since v3:
>> > >  - see cover letter
>> > >
>> > >  .../bindings/gpio/kontron,sl28cpld-gpio.yaml  |  54 +++++++
>> > >  .../hwmon/kontron,sl28cpld-hwmon.yaml         |  27 ++++
>> > >  .../kontron,sl28cpld-intc.yaml                |  54 +++++++
>> > >  .../bindings/mfd/kontron,sl28cpld.yaml        | 153
>> > > ++++++++++++++++++
>> > >  .../bindings/pwm/kontron,sl28cpld-pwm.yaml    |  35 ++++
>> > >  .../watchdog/kontron,sl28cpld-wdt.yaml        |  35 ++++
>> > >  6 files changed, 358 insertions(+)
>> > >  create mode 100644
>> > > Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> > >  create mode 100644
>> > > Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
>> > >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
>> > >  create mode 100644
>> > > Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
>> > >  create mode 100644
>> > > Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
>> > >  create mode 100644
>> > > Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
>> > >
>> > > diff --git
>> > > a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> > > b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> > > new file mode 100644
>> > > index 000000000000..9a63a158a796
>> > > --- /dev/null
>> > > +++
>> > > b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
>> > > @@ -0,0 +1,54 @@
>> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> > > +%YAML 1.2
>> > > +---
>> > > +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
>> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> > > +
>> > > +title: GPIO driver for the sl28cpld board management controller
>> > > +
>> > > +maintainers:
>> > > +  - Michael Walle <michael at walle.cc>
>> > > +
>> > > +description: |
>> > > +  This module is part of the sl28cpld multi-function device. For more
>> > > +  details see
>> > > Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
>> >
>> > Paths are normally relative.
>> 
>> grep Documentation/ Documentation
>> 
>> I know there are a lot false positives (esp in the first one)..
>> 
>> $ grep -r "\.\./" Documentation | wc -l
>> 1826
>> $ grep -r "Documentation/" Documentation|wc -l
>> 2862
> 
> I actually meant just for Device Tree bindings, but it does appear
> that 'Documentation' is used a bunch there too.
> 
> My reasons for not liking full paths is that the intention was always
> to move 'Documentation/devicetree' to a new location outside of the
> kernel source tree.

I see. I'll change that.

>> > > +%YAML 1.2
>> > > +---
>> > > +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
>> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> > > +
>> > > +title: Kontron's sl28cpld board management controller
>> >
>> > "S128CPLD" ?
>> 
>> still not, its sl28cpld, think of a project/code name, not the product
>> appended with CPLD.
>> 
>> > "Board Management Controller (BMC)" ?
>> 
>> sounds like IPMI, which I wanted to avoid.
> 
> Is there a datasheet?

No there isn't.

>> > > +maintainers:
>> > > +  - Michael Walle <michael at walle.cc>
>> > > +
>> > > +description: |
>> > > +  The board management controller may contain different IP blocks
>> > > like
>> > > +  watchdog, fan monitoring, PWM controller, interrupt controller
>> > > and a
>> > > +  GPIO controller.
>> > > +
>> > > +properties:
>> > > +  compatible:
>> > > +    const: kontron,sl28cpld-r1
>> >
>> > We don't usually code revision numbers in compatible strings.
>> >
>> > Is there any way to pull this from the H/W?
>> 
>> No, unfortunately you can't. And I really want to keep that, in case
>> in the future there are some backwards incompatible changes.
> 
> Rob,
> 
> I know you reviewed this already, but you can give your opinion on
> this specifically please?  I know that we have pushed back on this in
> the past.

Oh, come one. That is an arbitrary string. "sl28cpld-r1" is the first
implementation of this. A future "sl28cpld-r2" might look completely
different and might not suite the simple MFD at all. "sl28cpld" is
a made up name - as "sl28cpld-r1" is, too.

-michael