[PATCH] ARM: davinci: dm646x: Convert LEDs to GPIO descriptor table

Linus Walleij linus.walleij at linaro.org
Mon Jul 27 03:13:46 EDT 2020


This converts the DaVinci DM646x LEDs to use GPIO
descriptor look-ups.

Cc: Sekhar Nori <nsekhar at ti.com>
Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 33 +++++++++++++++++-------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4600b617f9b4..c303828140ac 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/property.h>
@@ -203,10 +204,10 @@ static struct i2c_driver dm6467evm_cpld_driver = {
 /* LEDS */
 
 static struct gpio_led evm_leds[] = {
-	{ .name = "DS1", .active_low = 1, },
-	{ .name = "DS2", .active_low = 1, },
-	{ .name = "DS3", .active_low = 1, },
-	{ .name = "DS4", .active_low = 1, },
+	{ .name = "DS1" },
+	{ .name = "DS2" },
+	{ .name = "DS3" },
+	{ .name = "DS4" },
 };
 
 static const struct gpio_led_platform_data evm_led_data = {
@@ -214,18 +215,32 @@ static const struct gpio_led_platform_data evm_led_data = {
 	.leds     = evm_leds,
 };
 
+static struct gpiod_lookup_table evm_leds_gpio_table = {
+	.dev_id = "leds-gpio.0",
+	.table = {
+		/*
+		 * These GPIOs are on a PCF8574a GPIO expander, which
+		 * is in turn named after the I2C device name. This is
+		 * device "u2" on I2C bus 1 with address 0x38. These
+		 * leds are at offset 4, 5, 6, 7.
+		 */
+		GPIO_LOOKUP_IDX("1-0038", 4, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("1-0038", 5, NULL, 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("1-0038", 6, NULL, 2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("1-0038", 7, NULL, 3, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device *evm_led_dev;
 
 static int evm_led_setup(struct i2c_client *client, int gpio,
 			unsigned int ngpio, void *c)
 {
-	struct gpio_led *leds = evm_leds;
 	int status;
 
-	while (ngpio--) {
-		leds->gpio = gpio++;
-		leds++;
-	}
+	/* Add the lookup table */
+	gpiod_add_lookup_table(&evm_leds_gpio_table);
 
 	evm_led_dev = platform_device_alloc("leds-gpio", 0);
 	platform_device_add_data(evm_led_dev, &evm_led_data,
-- 
2.26.2




More information about the linux-arm-kernel mailing list