[PATCH v11 12/12] dmaengine: imx-sdma: add uart rom script

Robin Gong yibin.gong at nxp.com
Fri Jul 24 14:51:25 EDT 2020


For the compatibility of NXP internal legacy kernel before 4.19 which
is based on uart ram script and upstreaming kernel based on uart rom
script, add both uart ram/rom script in latest sdma firmware. By default
uart rom script used.
Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).

rom script:
        uart_2_mcu_addr
	uartsh_2_mcu_addr /* through spba bus */
am script:
	uart_2_mcu_ram_addr
	uartsh_2_mcu_ram_addr /* through spba bus */

Please get latest sdma firmware from the below and put them into the path
(/lib/firmware/imx/sdma/):
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
/tree/imx/sdma

Signed-off-by: Robin Gong <yibin.gong at nxp.com>
Acked-by: Vinod Koul <vkoul at kernel.org>
---
 drivers/dma/imx-sdma.c                     | 4 ++--
 include/linux/platform_data/dma-imx-sdma.h | 8 ++++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 8735606..5900e32 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1729,8 +1729,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
 
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2	38
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	41
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	42
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	45
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	46
 
 static void sdma_add_scripts(struct sdma_engine *sdma,
 		const struct sdma_script_start_addrs *addr)
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 30e676b..e12d2e8 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -20,12 +20,12 @@ struct sdma_script_start_addrs {
 	s32 per_2_firi_addr;
 	s32 mcu_2_firi_addr;
 	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
+	s32 uart_2_mcu_ram_addr;
 	s32 per_2_app_addr;
 	s32 mcu_2_app_addr;
 	s32 per_2_per_addr;
 	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
+	s32 uartsh_2_mcu_ram_addr;
 	s32 per_2_shp_addr;
 	s32 mcu_2_shp_addr;
 	s32 ata_2_mcu_addr;
@@ -52,6 +52,10 @@ struct sdma_script_start_addrs {
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
 	s32 mcu_2_ecspi_addr;
+	s32 mcu_2_sai_addr;
+	s32 sai_2_mcu_addr;
+	s32 uart_2_mcu_addr;
+	s32 uartsh_2_mcu_addr;
 	/* End of v3 array */
 	s32 mcu_2_zqspi_addr;
 	/* End of v4 array */
-- 
2.7.4




More information about the linux-arm-kernel mailing list